bherbruck and Claude Opus 5.5
ae4570ed39
Colours in exports from materials and appearances; Appearance command
...
- Bodies export (STEP, 3MF) in the colour they are shown in: an appearance,
else the physical material's look, else the colour the body was imported
with (Document::body_color / painted). Physical materials used to export
no colour at all.
- AppearanceCommand (Modify): a colour per body ("#rrggbb" or [r, g, b];
null follows the material again), kept in the design and across renames.
- Material looks move to solvecraft-doc (material_color); the viewport draws
appearance, material or imported colour, as exported.
- Engine test: brass and red ABS bodies export, re-import with their RGB, and
keep it through open and export again.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:11:28 +00:00
bherbruck and Claude Opus 5.5
a88b8eb6b3
SketchConstrainer (applies the constraint one or two entities nearly satisfy) and sketch.toggle_driven (driven/driving dimensions, with over-constraint check)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 00:12:56 +00:00
bherbruck and Claude Opus 5.5
cb01314d35
3D sketch curves (wires): Include 3D Geometry keeps out-of-plane edges and curves 3D; Project To Surface (curves onto a face along the sketch normal), Intersection Curve (bodies/faces), Isoparametric Curve (u/v or a direction), Spun Profile (a body's outline about an axis) and Fit Curves to Mesh Section; all linked and re-resolved; wires drawn, inspected and deletable
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 23:59:59 +00:00
bherbruck and Claude Opus 5.5
6f349b79f5
AutoConstrain (from datum, and Finish with AutoConstrain): infers coincident, horizontal/vertical and tangent constraints, then dimensions until fully constrained; Insert DXF (ASCII: lines, arcs, circles, bulged polylines, ellipses, splines, text; $INSUNITS) and Insert SVG (paths with all commands, shapes, transforms, units; Béziers kept exact as splines/conics; text) into sketches; sketch.export_dxf; text outline points hidden (view::sketch_point_visible)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 23:22:28 +00:00
bherbruck and Claude Opus 5.5
eb2a5d27b9
Scope decisions (in-scope parity headline, deferred tabs), STEP import and kernel notes in ROADMAP/plan
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 23:15:09 +00:00
bherbruck and Claude Opus 5.5
54ee20bef4
Sketch constraints and dimensions: Curvature (G2, ConstraintSmooth) and Polygon constraints; redundant constraints and dimensions are refused as over-constraining (Fusion behaviour), with driven (reference) dimensions that measure instead; arc length and linear diameter (about a centerline) dimensions; sketch.glyphs (constraint glyph anchors, conflicts) and sketch.snap (coincident/midpoint/on-curve/horizontal/vertical inference); solver damping floor keeps weakly seen variables from flying off
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 23:10:03 +00:00
bherbruck and Claude Opus 5.5
6e20038906
Sketch Blend Curve (tangent control-point spline between two curve ends) and the Centerline line type (sketch.centerline: left out of profiles, drawn as an axis)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 22:55:34 +00:00
bherbruck and Claude Opus 5.5
2491c40fef
Sketch Text (MTextCmd, sketch.edit_text): glyph outlines of the embedded Liberation Sans (SIL OFL 1.1, attributed) as lines and conics that close into extrudable profiles; editable text, height, position and angle
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 22:49:49 +00:00
bherbruck and Claude Opus 5.5
8d7a0cf3d0
Sketch free-form curves: Ellipse (centre, major axis end, minor radius), Fit Point and Control Point (degree 3 and 5) Splines, Conic Curve (rho); solved like other curves (points on them, tangency at shared ends, drag fit points), profiled as polylines; mirror/pattern/move/scale copy them; Tangent Arc continues splines and conics
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 22:35:04 +00:00
bherbruck and Claude Opus 5.5
73f68f3f50
Sketch tools: Midpoint Line, Tangent Arc, 2-Tangent and 3-Tangent Circle, Center Point Slot, three-point and center-point Arc Slots; Trim, Extend, Break, sketch Fillet (radius dimension), equal/distance-angle/two-distance Chamfers, Offset (chains, side point), Mirror (symmetry constraints), Circular and Rectangular sketch patterns, Sketch Scale, sketch.move (move/rotate/copy)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 22:20:17 +00:00
bherbruck and Claude Opus 5.5
f5c2c725c8
Extrude/revolve "all profiles" means the drawn ones: auto-projected face edges only count when the drawn curves make no profile
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 21:58:18 +00:00
bherbruck and Claude Opus 5.5
9301bc4210
Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 21:58:18 +00:00
bherbruck and Claude Opus 5.5
97e73b0935
Selection feedback and origin: hover and selected highlights (theme tokens), origin planes/axes/point at a fixed screen size with browser eye toggles, click-to-pick sketch planes and faces with camera animation (Finish Sketch returns), multi-select dialog inputs with pre-selection, tangent chains and face-to-edges, window/crossing box selection, shell/draft/mirror/hole dialogs
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 20:00:17 +00:00
bherbruck and Claude Opus 5.5
431b87c2b9
M1: hole feature (simple, drilled, counterbore, countersink), cone classification and apex counting
...
Oracle: 19/29 parts match Fusion.
Co-Authored-By: Claude Opus 5.5 <[email protected]
2026-10-07 19:22:27 +00:00
bherbruck and Claude Opus 5.5
3714342737
M0: xtask layers, parity, oracle, assets, ci; Fusion command catalog
...
Co-Authored-By: Claude Opus 5.5 <[email protected]
2026-10-07 17:34:53 +00:00
