A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes#1362.
Co-authored-by: NOWN-DEV <[email protected]>
Fixes#1187. New parameters.move {name, before|after} reorders user parameters (the design's own params order, so it is saved with no format change, and undoable); the Parameters dialog's user rows get up/down buttons. Label in every catalog. I merged main in. Checked on main + this branch: cargo check --workspace, the engine parameters tests, the UI parameter_order test, and docs/features.md regenerates unchanged.
The three walks over a feature (expressions, references, geometry) are generated from FeatureKind by #[derive(Walk)] in a new proc-macro crate, solidcraft-derive, from #[walk(...)] attributes written next to each field. The hand-written walks in params.rs, feature_refs.rs and feature_geometry.rs are gone; Ruled Surface and Extend have their attributes, and the three golden walk records are unchanged.
Co-authored-by: jijinbei <[email protected]>
Extend works on any surface: natural (continuing the face's own surface), tangent (G1 run-off) or curvature (G2 run-off), by a distance, up to a plane or face, or back to the surface's bounds, with neighbouring edges lengthened to meet. Untrim and Extend share face parameter-loop helpers. The new SurfaceExtend fields are noted under format 21. Closes#760.
Ruled Surface: strips off an edge chain in normal, tangent, angle or direction mode, exact planes/cylinders/cones where possible, mitred or round corners, stitched into one surface body. SurfaceRuled is noted under format 21. Closes#762.
A design built over MCP is many small commands, and each one did work over the
whole design, so building or showing a 1,300-body design took minutes:
- moved components were transformed and meshed again after every change; world_state
now reuses each placed body whose definition and placement are unchanged
- next_d_name searched the design once per candidate number
- Document::eval evaluated every parameter for every expression; now only when the
expression names one
- param_rows' used_by was quadratic; the desktop no longer gathers completions on every
change while no text box has focus
solidcraft-cli bench-agent builds a generated ~1,300-body bicycle command by command
and times it (241 s -> 16 s here). Eval output is unchanged apart from timings.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Moves the per-feature geometry handling (transforms, face points, profile selections, point expressions) into one geometry walk in feature_geometry.rs, with a golden record of what each feature kind moves. sheet.perforate holds no world geometry and joins the no-op arm.
Adds sheet.perforate: round holes on a staggered or square grid over the flat sheet, kept clear of edges, cut-outs and bend zones. The holes go to the flat pattern, the DXF and the measured volume rather than the B-rep, so a panel can carry many thousands of them.
Thin Extrude builds walls of a set thickness along sketch curves, open chains and closed loops, with the wall centred, inside, outside or on both sides at two thicknesses. Saved under format 20 (thin on an Extrude); an extrude without thin saves as before. Closes#721.
timeline.export_script (and solidcraft-cli script) writes a design's history as a command script that solidcraft-cli eval replays into the same design, so a bug that only shows on one design becomes a one-file repro. timeline.add restores one stored feature with its id, names and references, through the same checks a design file gets when it opens.
Closes#886. SychPL's #1078 approached the same issue independently; thanks to both.
Co-authored-by: SychPL <[email protected]>
inputs_mut, inputs and expressions are now built on one exhaustive walk (walk_exprs / walk_exprs_mut) instead of two hand-written matches over FeatureKind. inputs() no longer clones the feature, plane chains are walked with the same nesting cap for inputs as for expressions, and a new variant without a walk arm does not compile. A golden record of every variant's expressions guards the walk.
Fillet gets a Curvature (G2) radius type (type: "curvature", alias "g2"): a quintic blend whose size is the equivalent circular setback, for convex and concave straight edges between planar faces with a perpendicular planar end face at each end. Unsupported cases are refused rather than falling back to a circular fillet, and a blend that would cross a loop in its end face is refused. Persisted as a fillet style under format 19; labels in en/de/ja/ko/zh.
Co-authored-by: midasdf <[email protected]>
Offsets picked faces along their normals into a new surface body: planes and cylinders move exactly, other faces get a fitted B-spline within tolerance, and offsets that would fold over are refused. Adds the SurfaceOffset feature (noted under format 18), the surface.offset engine command and an Offset Surface dialog.
Closes#758.
Co-authored-by: jyviko <[email protected]>
Surface Loft lofts open or closed curve chains, one section per sketch in pick order, into surface bodies. Adds the SurfaceLoft feature (format 18 note), the surface.loft command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests.
Part of #757.
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17.
Refs #757
Co-Authored-By: Claude Opus 5.5 <[email protected]>
One edge flange feature gave all its flanges one height and one angle. A
part whose flanges lean differently took one feature per angle, and
flanges of separate features don't close toward each other, so its
corners stayed open.
- sheet.flange (edge): an entry of `edges` is a point [x, y, z] as before,
or {point, angle?, height?} whose angle and height (expressions, checked
like the feature's) replace the feature's for that edge. Bad input is
refused with the edge named. Before, the object form was read for its
point and the rest was ignored without a word.
- The feature stores its edges as FlangeEdge. An edge without values of
its own is written as the plain point it always was, so designs without
them are read and written as before; an unknown key in an edge is
refused, not dropped.
- The edges' values are feature inputs of their own (Edge angle, Edge
height, after the feature's), so parameters, renames and
parameters.change reach them. timeline.edit names the edges again when
it changes them, so each value stays with its edge.
- SheetBody::add_flanges_each trims every edge by its own setback and
adds the flanges. The corners between them close as between equal
flanges: the closing already works from the two flanges it joins (each
one's fold and leg), so the flat pattern follows by hand from the
angles, the heights and the rule (the tests derive it).
- The Flange dialog shows a row per picked edge with an angle and a
height box (empty: the dialog's value) once more than one edge is
picked, and brings them back on Edit Feature.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.
Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.
Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
Persist typed sketch dimensions and bounded ordered configuration rules in format 8. Use exact occurrence paths and source identity for editing, movement, appearance, and mass. Preserve sheet material regions through cutting, folding, and exact DXF export; retain nested cavities and material islands.
Validation: cargo xtask ci passed, including 368 engine tests, 178 UI tests, 68 UI scenarios, 136 kernel tests, and the 10-crate wasm check. Actual preview workflows and legacy format-7 origin-corner reopening were inspected.
kernel::fillet_variable_points(body, edge, start, [(position, radius)...], smooth): the radius law is a B-spline of the edge parameter (straight pieces, or C1 cubic pieces with Catmull-Rom slopes), and since every section's arc is affine in its radius the blend is exactly a rational B-spline (degree 2 across, the law's degree along) with B-spline contact curves on the faces. The largest radius along the edge decides whether the blend fits. Fillet type variable takes mid: [[position, radius expr], ...] and smooth; middle radii are parameters of the feature (Mid radius) and follow user parameters. Tests: straight pieces against (1 - pi/4) L (a^2 + ab + b^2) / 3 per piece, smooth against the integrated law, either end as start, refusals; engine test with a parameter-driven middle radius.
Refs #9
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
New kernel file blend_variable.rs. The hooks into blend.rs are visibility
only: plane_normal, vtx, rebuild_face and unsupported are now pub(crate).
- fillet_variable(body, edge, start, r0, r1) works on the same edge
configuration as the constant fillet (straight edge, planar faces, end
faces square to it). The radius runs linearly from the end nearest
`start`, and every section square to the edge is a circular arc. The
blend is an exact degree (2, 1) rational B-spline: arc control points
move linearly.
- fillet_chord(body, edges, chord): the radius per edge comes from its
face angle (chord = 2 r cos(phi/2)).
Fillet feature: style constant | chord | variable {radius2, start};
FusionFilletEdgesCommand takes type, radius2 and start.
Tests:
- Variable 2 -> 5 on a box edge removes (1 - pi/4) L (r0^2 + r0 r1 + r1^2)/3.
Starting from the other end gives the same solid; equal radii give the
constant fillet; too large is refused.
- Chord 4 on a right angle equals radius 4/sqrt(2).
- Engine: both types by command.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Kernel extend(body, edges, distance) moves the picked straight edges of a
planar surface outward in its plane, with neighbours meeting them. Doc
feature SurfaceExtend, engine FusionExtendCommand. Tests: 10x10 extended
by 5 past one edge gives 150, past two gives 225; the engine patch, trim,
extend and thicken gives 240.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Kernel (surfaces):
- Bodies with an open shell are surface bodies (Body::is_surface).
- patch_region: a planar patch of a sketch region. patch_edges: a planar
patch filling a closed loop of a body's edges.
- copy_faces: faces copied out as a surface.
- stitch: sew surfaces along coinciding edges, turning faces to agree; the
result is a solid when it closes.
- trim: cut a surface by a plane or face and keep one side.
- thicken: offset planar and circular-cylindrical faces along their
normals (one side or symmetric) into a solid. Plane copies slide;
cylinder copies scale about the axis, exact for NURBS circles. Free
edges get ruled walls. Faces meeting at a sharp edge are refused.
Doc features Patch, Stitch, Thicken (with operations) and SurfaceTrim;
engine commands FusionSurfacePatchCommand, FusionSurfaceStitchCommand,
FusionSurfaceThickenCommand and FusionSurfaceTrimCommand.
Tests (volumes):
- A 10x10 patch thickened by 2 gives 200, also symmetric.
- Half a cylinder side thickened outward gives half a ring; both halves
inward give the full ring.
- Six faces of a box stitched back give 6000; an open box with its top
patched from the edges, stitched, gives 6000.
- Trim keeps 30 or 70 of 100.
- Engine: patch, trim, thicken gives 140.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
JIJINBEI