The loading box was a full-window modal whose backdrop covered the custom title bar. It is now a light overlay under the title bar, so dragging, snapping, resizing and the window buttons keep working during open, import and recovery. The timeline rebuild shows feature N of M, and Cancel or Esc stops it at the next feature (solidcraft_doc::progress). Recovery restore now runs off the window thread too. A control or MCP doc.open or import is answered once the file is in and doesn't block frames; edits sent meanwhile wait their turn. The web build still opens in place.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
component.insert_design adds a component holding another design's solid bodies, linked to its file (stored relative to the assembly once saved). component.update_links reads the linked designs again, component.break_link keeps the bodies and forgets the file, and component.links lists them. Links are saved under format 16; an older build keeps the bodies and drops the link.
Fixes#533
An edge flange whose edge ends at an inside corner of the base now trims only the strip under its own edge, so legs and stems past that corner stay. Where the bend ends beside more of the base, the rule's bend relief (relief_width, relief_depth) is cut into the base, or a note says why it was left out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes#396. A union that would come back as shells touching over an area is rejected and the face-in-face case is fused exactly; line and point contact stay as before.
Fixes#602. Collinear-edge merging, piece naming and the dialog preview each work in one pass instead of quadratic loops; the issue's example goes from 86 s to 5.1 s.
Fillet fit: reduce lowers the radius only where it doesn't fit: picked edges are grouped where they can limit each other (sharing a face or vertex), and each group gets the requested radius where it fits, otherwise the largest that does. Refs #293.
Co-authored-by: Iraklis Kourtis <[email protected]>
A flat face that no construction certificate names on its own now attaches by its exact history name (a new lineage face certificate): cut walls and floors, chamfer faces, each pattern or mirror copy, side walls a Join merged, and the pieces a later feature split a face into. Construction certificates still come first; a seed keeps its certificate when it is patterned. Two flush extrudes of one outline joined end to end keep their exact history in the prism boolean. Face sketch 52% -> 71%, offset plane 52% -> 71%, press-pull/extrude from face 41% -> 60% in the action matrix; baseline blessed.
Fixes#491, fixes#492, fixes#493, fixes#557.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
New view.apply command restores a named view, a standard view or any camera (view state, not an undo step); the desktop viewport follows it and the browser's Restore uses it. The MCP screenshot tool takes a named view or a camera. Un-ignores the #528 regression test. Fixes#528.
Co-authored-by: jonaswre <[email protected]>
The Flatpak app id, desktop/metainfo/MIME file names, icon name and the window's Wayland app_id / X11 class are now ai.storyteller.solidcraft, the id the ArtCraft launcher expects.
Existing Flatpak installs move over: the Pages repo marks app/ai.storyteller.solvecraft end-of-life with a rebase to the new id, so flatpak update offers the switch and Flatpak carries ~/.var/app along. A new install next to the old one copies settings and autosaves on first launch through a read-only grant on the old data folder. The metainfo declares <replaces>/<provides>, the desktop entry X-Flatpak-RenamedFrom, and AppImages drop the menu entry an older AppImage installed. deb/rpm upgrades remove the old-named files.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A save with cache: true also stores a small bounded PNG thumbnail (240 × 150, at most 256 KiB, keyed to the exact document) made from cached meshes only. Home uses it when its local picture is missing, without rebuilding the design; ordinary saves and downloads still omit it. Closes#303.
Co-authored-by: lillith <[email protected]>
A point dimensioned from linked geometry (projected, included or intersected) keeps its side when a parameter moves the link's source past it: the solve reads sides and turns from the stored state instead of from beside the moved line, both on recompute and when editing the sketch.
Co-authored-by: NOWN-DEV <[email protected]>
A design can define its own physical materials (material.create, material.edit, material.delete): name, density and an optional look. They work everywhere built-in materials do: assignment, mass properties, colours and configuration cells. Stored in user_materials, an additive field under format 16. Un-ignores the #554 regression test. Fixes#532.
Co-authored-by: jonaswre <[email protected]>
An edge flange on another flange's far edge (a return) runs along that edge from end to end, following the parent's closed or cut-back corner, and returns of one feature close toward each other at convex base corners, mitred the rule's gap apart. Bends stop square where the mitre allows. Fixes#593.
Co-authored-by: NOWN-DEV <[email protected]>
The bend table, flat pattern and DXF list a bend only where its centre line has material: a bend that cut-outs (or pockets that together go through the sheet) shorten keeps what is left, and one they split gets a row per piece, all with the bend's number.
Co-authored-by: NOWN-DEV <[email protected]>
MCP batch takes verbose: false for compact replies: feature steps leave out the full body list and sketch steps the ids they repeat outside created. Feature replies now also list changed_bodies and removed_bodies next to created_bodies, so a compact reply still shows every effect of a step. Un-ignores the #530 regression test. Fixes#530.
Co-authored-by: jonaswre <[email protected]>
A Box cut, or a Cylinder cut whose axis is the sheet's normal, machines a sheet metal body like the extrude cut of its footprint: through the sheet it's a cut-out (a cylinder an exact round one in the flat pattern and DXF), part way it's a pocket. Primitives at other angles or across a bend are still refused. Un-ignores the #541 regression test. Fixes#541.
Co-authored-by: jonaswre <[email protected]>
Faces that a sheet fold or unfold moves keep their names: points on a moved panel are taken back through the panel they lie on to where the sheet held them before the feature, and named from the faces there. Un-ignores the #535 regression test. Fixes#535.
Co-authored-by: jonaswre <[email protected]>
Tapered extrudes accept profiles that mix lines and tangent arcs (slots, D-profiles, rounded rectangles): each arc keeps its centre and angles and its radius moves with the taper, so its side stays an exact cone; lines are offset and mitred. An arc meeting another edge at a corner is still refused. Un-ignores the #546 regression test. Fixes#546.
Co-authored-by: jonaswre <[email protected]>
Draft extends the picked faces to every face on the same surface, so one pick on a cylinder's side (stored as two halves) drafts the whole round wall into a frustum. Un-ignores the #547 regression test and adds a kernel test for a round hole. Fixes#547.
Co-authored-by: jonaswre <[email protected]>
An extrude cut or join only extends its tool past an end that lies on a target face, and by less than half the way to the next face level, so a tool can no longer cut through a thin floor beyond an end that touches no face. Un-ignores the #545 and #544 regression tests. Fixes#545.
Co-authored-by: jonaswre <[email protected]>
sheet.fold tests its fixed point against the whole sheet body, so a point far above or below the sheet is refused atomically, while a point on any face (including a flange's leg) still works. A stored fold whose point ends up in the air recomputes, keeps its side and warns. Un-ignores the #371 regression test. Fixes#371.
Co-authored-by: jonaswre <[email protected]>
sheet.flat_pattern reports every cut-out exactly in a new cutout_shapes list, parallel to cutouts: a round hole as a circle, other cut-outs as their lines, arcs and (for other curves) polylines. Pockets get the same. The DXF writer and the JSON share one circle test. Un-ignores the #542 regression test. Fixes#542.
Co-authored-by: jonaswre <[email protected]>
Hidden bodies, occurrence placements, sketches and origin items are saved with the design and come back when it is reopened. Visibility is still not an undo step, but hiding or showing something now counts as an unsaved change. Additive field under format 16. Fixes#531.
Co-authored-by: jonaswre <[email protected]>
Construction axes, points and planes resolve their picks against the model as their component sees it (in the root, every placement, pasted instances too), and a Hole picked on another component's body cuts that body. components-arm 355 -> 502/594 and joints-hinge 304/390 -> 371/408 in the action matrix.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
sheet.flange refuses the sheet values its rule owns (thickness, K-factor, bend radius, reliefs, hem gap) instead of silently ignoring them, and says to use a rule. Un-ignores the #570 regression test. Fixes#570.
Co-authored-by: jonaswre <[email protected]>
A stored fold whose fixed point drifts off the sheet after a parameter change keeps the side the point lies on and shows a warning instead of breaking the timeline. A new fold still refuses a fixed point off the sheet, atomically. Un-ignores the #370 regression test. Fixes#370.
Co-authored-by: jonaswre <[email protected]>
A copy added by raising a body pattern's count after a rename is numbered after the highest stored copy, so it no longer takes the number the rename freed. Un-ignores the #372 regression test and adds one for undo/redo and save/reopen. Fixes#372.
Co-authored-by: jonaswre <[email protected]>
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.
Fixes#374. Feature replies gain created_bodies: the bodies the new feature made, apart from the ones it changed or that were already there. Documented in the execute tool description and docs/mcp.md.
Fixes#527. Bodies are paired by a sort-and-sweep over their bounding boxes, and the cap moves from 200 bodies to 20,000 overlapping pairs per call (reported as truncated / skipped_pairs).
sketch.text and sketch.edit_text take an optional font: an installed family or a .ttf/.otf/.ttc file. Edit Text gets a Font field. The font is kept with the text under format 16; no fonts are bundled, and the font search is bounded.
Fixes#513
Co-Authored-By: Claude Opus 5.5 <[email protected]>
solid.move takes copy: true to keep the source bodies and transform a new copy of each, with a Create Copy box in the Move dialog. Designs without it save and load exactly as before.
Display meshes also bound the angle one facet turns, so bends and small holes on a large body are drawn round instead of as chamfers or squares. Bounded per face, and only the display mesh changes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sheet Metal Rules get a Corner Relief Shape (notch, round or rectangular), sized by the rule's corner relief, cut where two bends meet at a corner of the base. Notch, the default, keeps existing designs as they were. File format 16.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Text outlines count as drawn geometry when picking profiles, and "all profiles" leaves out the counters of letters (the holes of A, B, 8), so text extrudes as letters with their holes whether or not other curves are drawn next to it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When a body that was already cut into pieces is cut again, the new pieces are numbered past the names already taken ("Bar (2)"), instead of reusing "Bar (1)".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When sample points say two bodies are apart or one is inside the other, the facetings are now checked for surfaces passing through each other; if they do, the boolean is computed instead of shortcut. If it still can't be intersected, the sampled answer is kept as a flagged, unverified result, and Interference lists such pairs as "could not be checked" with the reason. Fixes#442 and #443.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A hole positioned on a face now follows that face along the hole's own axis instead of sliding to the face's nearest point. When the face no longer reaches the position, the hole stays where it was placed and the feature says so.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When adjacent profiles are merged for one extrude, collinear lines on either side of where a shared boundary ended are joined back into one edge, so the body has no split faces or extra vertices for later booleans to trip on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A profile traced over a face sketch's projected boundary left the extrude's caps and sides without an exact planar source, so a sketch or offset plane on the new top face was refused. The drawn curve is now the edge's source where it covers a projection. Clearer fixed-plane message; regression tests in the engine, UI harness and design corpus, plus a corpus-wide flat-face attachment check (known gaps under #491-#495).
Fixes#489
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix: name an untitled design after its file on save and open
Design tabs all read "Untitled" because a design's name only ever came
from file.new. Saving a design still under the default name now names it
after the file (bracket.solidcraft -> "bracket"), and opening a file whose
stored name is the default shows its file name. Names chosen by the user
are kept. The rename is part of the save, so it is not an undo step and
does not leave the design marked as changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
* test: expect the file's name after saving an untitled design
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Add a one-surface fill of closed 3D loops to geom
A closed loop of curves that does not lie in a plane has no exact surface;
the usual answer is one smooth face fitted over it. fill_loop does that:
- the loop's best-fit plane (Newell normal), with a frame chosen from the
loop itself so the result does not depend on where the loop starts, its
direction, or where the part sits
- the loop seen along that normal must be simple and must not fold or run
along the normal; otherwise it is refused ("not supported yet"), never
filled with wrong geometry
- one non-rational bicubic B-spline height field over the loop's box,
fitted by least squares to the loop's samples (The NURBS Book 9.4.1,
9.4.3, eq. 9.62/9.65) with a thin-plate smoothness term
lambda*A*int(h_uu^2 + 2 h_uv^2 + h_vv^2), A one grid cell's area, so the
fit is the same at any scale; only planes are reproduced exactly
- span counts per direction (long narrow loops fit), refined until the
loop is within tolerance, else refused with the deviation reached
bspline: bisected span search, basis functions on a stack array, one
clamping helper shared by curves and surfaces, one binomial helper.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Patch fills non-planar loops of edges with one smooth face (#250)
surface.patch with edges refused any loop that is not planar ("not
supported yet: patching a loop that is not planar"). It now fills it:
- planar loops still get one exact planar face, but planarity is certified
conservatively: lines by their ends, B-spline/NURBS edges by their control
points, intersection curves by their samples lying on a support plane
within tolerance; a loop that can't be certified is filled instead
- other loops get one face from geom's fill_loop, bounded by the body's own
chained edges, whole (no split): its history is one generated face whose
edges are the body's, and it stitches back into a closed solid
- intersection-curve edges are sampled by a seeded, guarded double
projection shared by the planarity test and the fill (plane_fit)
- the face tolerance is 10x the planarity tolerance (documented: later
operations take the face to contain its edges within it)
- edge picking runs inside the guard; the geom->truck conversion is shared
with the T-spline sheets (spline_conv); the Newell plane fit is shared with
STEP import
Tests: 3- to 8-sided, concave (dart, arrow, plus), flat-corner, two-edge and
imported rims fill as one face and stitch closed (volumes against an
independent integral); finite mesh normals, same result for any pick order
or placement; non-height-field loops and too-fine detail are refused.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Test the Patch dialog filling a non-planar loop of picked edges
The Patch dialog's only test used a sketch profile. Picking the four
curved rim edges of a box cut by a sideways cylinder now makes one
surface.patch command whose result is a single smooth face over the rim.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
