* feat(geom): surfaces through curve networks, and spline spaces to build them
Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges
kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry
BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(kernel): G2 boundary surfaces against a body's face
The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(kernel): a boundary patch with straight corners measures its own area
A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)
A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(doc): boundary surfaces through curve networks and loops of three or four
FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(engine): surface.boundary through loops of three or four and curve networks
The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).
Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(ui): Boundary Surface dialog
Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(oracle): a boundary surface through a loop, thickened (#763)
Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* refactor: boundary surfaces, review cleanups
Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
Lists and Packaging lint each took their own runner slot on every PR push. The list checks now run
in the existing checks job; Lists stays on main. Packaging lint skips PRs that only touch icons.
Co-authored-by: Claude Opus 5.5 <[email protected]>
With Windows off pull requests, GitHub's 20 runners sat idle while every
fork job queued for the self-hosted pool. Select checks, repository
checks, Clippy, doc tests and the summary go back to GitHub's runners;
Build tests and the test shards stay on the isolated self-hosted pool.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Pull requests now run the repository checks, Clippy, the affected
crates' tests in 2 shards, and the doc tests. Windows, the reference
tests and the robustness goldens run on pushes to main and in the
nightly, where a break is fixed forward. This is the split Bevy, Zed
and Ruff use, and it cuts each pull request's CI to about a third.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Blacksmith isn't provisioning runners: its dashboard says the account
"requires additional verification", so every job labelled blacksmith-*
stays queued with no runner. Fork PRs' Linux jobs go back to the
self-hosted-untrusted pool (#2249/#2252) and the rest to GitHub's runners
until Blacksmith verifies the account; then #2237 can be re-applied.
This reverts commit dc40f051b1.
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Fork pull requests, the nightly run, Run workflow, the test archive and
test shards 3-4 move from ubuntu-24.04 to blacksmith-<N>vcpu-ubuntu-2404
(16 vCPU for Clippy and the test archive, 8 for test shards, doc tests,
reference tests and cross-compiles). Trusted runs keep the self-hosted
routing. Blacksmith runners count as self-hosted to GitHub, so steps now
tell our own machines apart by runner name.
TEMPORARY: this branch routes its own run like a fork pull request.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: jyviko <[email protected]>
Every fork run waited in GitHub's shared queue just to start. The gate
and summary jobs now run on the isolated runners as well; the local
output stays false for forks so later jobs never pick the trusted pool.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Fork PRs were waiting hours for GitHub's shared runners. Their Linux
jobs (checks, Clippy, Build tests, the test shards, Doc tests, Reference
tests) now run on the ephemeral, network-jailed self-hosted-untrusted
runners, without the trusted runners' warm build directories.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Show each dimension's parameter name while creating or editing it, and let
users insert another driving dimension at the expression cursor or selection.
Use the available editor width and keep Apply aligned with the right edge.
Add a tools dropdown with Measure, named user parameter expressions, and
access to the existing parameter table for adding and editing parameters.
Preserve the unfinished dimension expression while either window is open.
Cover reference insertion, dependent updates, parameter selection, dialog
round trips, applying and cancellation with UI integration tests. Update the
parameter guide.
Signed-off-by: Karl Von Richter<[email protected]>
The toolbar gives up room in small steps (labels shorten, then icons only, then panels hand buttons to their drop-down one at a time, then trailing panels go to the » menu) instead of collapsing whole panels, so medium-width windows no longer lose icons or leave a blank gap.
Preferences > Graphics grew a row (Grid follows the view, #2035), so the Colour vision
control now sits below the fold of the fixed-size page; the scenario scrolls to it.
The page itself already scrolls for real users.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Pull requests from branches of this repository share the work with the self-hosted runners like main does; fork pull requests stay on GitHub's runners. Select checks and ci run on a light self-hosted runner; the repository checks, Clippy, doc tests, reference tests and test shards 1-2 on the fast ones. The test archive is still built on GitHub's runners (glibc).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* docs: ribbon UX redesign proposal (mockups and notes)
Seven mockup images and a short description of the proposed ribbon shell, with floating and
compact layout options. Pictures only; no app changes. The sketch variant with tab locks is
left out.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* docs: update the UX mockups to the current command set
Adds the Sketch Pattern panel, Perforate, new joints and motion commands, Fair and Match Surface,
and the Render workspace; the workspace switcher now matches the app (Design and Render available,
Animation, Simulation, Manufacture and Drawing later). Command map covers all 389 commands.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* docs: draw the UX mockups with the reviewed icon SVGs and accents
Ribbon, browser, history and navigation icons now come from the icon system in #853, with the
Sketch tab in the Sketch green and constraints in red.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
* docs: address review on the UX proposal README
Describe the current toolbar in our own terms, and list only Design and Render as the workspaces in
scope.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
---------
Co-authored-by: Claude Sonnet 5.5 <[email protected]>
The merge queue runs the full suite on exactly the commit it then puts on
main, and main's push run then ran the full suite again on the same files.
Select checks now asks the Actions API whether a passing merge_group CI run
exists for the pushed commit; if so the push runs only the repository checks.
A push that skipped the queue, or an API that cannot answer, still runs
everything. The nightly still runs the whole suite.
Pull requests also run less: the reference tests only when solidcraft-cli (or
anything it depends on) is affected, and doc tests only for the affected
packages that have a library. The ci check requires the reference tests only
when they were selected.
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
Co-authored-by: jyviko <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
#1583 turned the grid to the upright origin plane in side views for
everyone. That is now Preferences > Grid follows the view, off by
default; headless pictures keep the ground grid.
Co-authored-by: Claude Opus 5.5 <[email protected]>
#1752 listed cs as complete, but it lacks messages added to en.json since,
which failed the completeness test on main. Missing messages fall back
to English until the catalog catches up.
Co-authored-by: Claude Opus 5.5 <[email protected]>
The icon check from #853 requires every command to have one; #1900 added
inspect.clearance without, which failed Format and repository checks on
main and every PR.
Co-authored-by: Claude Opus 5.5 <[email protected]>
