bherbruck and Claude Opus 5.5
c0725ebc86
Dialog parity: Mirror has Object Type (Bodies / Features, a hole mirrored as a feature; Edit Feature keeps it); Thread has Full Length (a length only when off)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:56:11 +00:00
bherbruck and Claude Opus 5.5
23d38fab97
STEP export: read the file back only when faces were merged
...
The read-back check (fallback to unmerged pieces) imported every export.
Now it runs only when some body actually had faces merged. Oracle 41
(42 faces, nothing merged): export no longer re-imports, which saved 7 s.
Pipe flange (merges): 1.1 s for the read-back.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:34:18 +00:00
bherbruck and Claude Opus 5.5
b36b332619
Patterns and mirrors of holes drill each copy afresh (its spot moved by the instance transform and found on the surface there), so a blind hole's depth counts from the face at the copy instead of from the bottom of the original hole (QA s30: three blind holes now remove three holes)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
83a10c813a
Unit-less parameters used as lengths read in the design's units (feature evaluation and parameter values; bare numbers stored in inputs stay mm); document.units checks what the geometry reads (Document::length_inputs) and writes the old unit (with it as the parameter's unit) into bare unit-less parameters that would move; cached results keyed on the design's units
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
e30309be0d
Insert Fastener (FusionFastenersCommand) on SOLID > INSERT, icon "fastener": the Insert Part dialog's command (same as parts.insert)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
f7c26d8dfe
Standard parts library (parts.library, parts.insert, parts.resize): ISO 4762 socket head cap screws, ISO 4014/4017 hex bolts, ISO 4032 nuts, ISO 7089 washers, ISO 4026 set screws, ISO 8734 dowel pins and 6000/6200/600-series bearing envelopes, M3–M20, built in code from the standards' dimensions as their own components with cosmetic threads; inserted at a hole's rim they get a rigid joint that puts them on the hole's axis seated on its face; resize rebuilds in place. Circle joint origins are named after the cylindrical wall
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
b2d0452656
Fold: with no fixed side the larger side stays, whichever side of the line it is on (the side areas were measured from the wrong point for one side; QA s22)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
2ef7f908b0
ROADMAP: M5
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
3b88585e5c
sheet: clippy (items after tests)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
05b38e0f5f
Persistent naming for sheet metal: base panel edges are named after the base sketch line they lie on, flange edges after their flange (F<feature>.<k>) and side (far / side0 / side1, top or bottom face); flanges and hems store edge names and pick by name first (a name that is gone keeps the point with a warning)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
c6cb3dd1e6
naming: clippy
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
23e50e4540
Persistent naming: shell inner faces named after the wall face they offset (F<shell>:inner:<face>), sweep and loft faces by start/end caps and the profile curve each side sweeps
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
7c611aec0c
Booleans stay in their component: a join, cut or intersect without explicit targets changes only its own component's bodies (and what it made), auto join/cut looks only at the active component; any feature takes participants: [bodies] to reach other components ("*" = every body); file format 5 gives older features in designs with components participants ["*"] so they keep their shape
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
2886399215
Bare lengths typed into features (commands and parameter edits) mean the design's units: they are stored with the unit written in (2 in an inch design is "2 in"); lengths with units, angles and mm designs are unchanged
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
a762391697
Move triad handles published for scenarios (move_x, move_rz…); s33 (Move opens at 0, the X arrow moves along X only) enabled
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
8fa566af33
Continuous orbit (navigation bar): the view turns about the vertical until the next click or key
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
1970b8c680
Viewport: a soft ground shadow under the model, seen from above (ui groundShadow, on by default)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
54c7690271
Viewport: silhouette outlines on curved surfaces (back faces pushed out on screen, drawn behind the model) in the styles with edges; new visual style Shaded with Hidden Edges (edges behind the model drawn faintly)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
aee1e941bf
Camera: Fit (F6, navigation bar) frames the selection when there is one; the wheel zooms toward the model's surface under the cursor
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
a3d187ccd1
Appearances in the viewport: per-face looks colour their faces, and see-through bodies and faces (opacity below 1) draw as glass: far sides first, then near sides, blended over the model
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
2b9ed16cc8
Move/Copy like Fusion: opens with nothing moved and a full triad at the bodies' centre (X/Y/Z arrows, plane squares, rotation rings, free-drag centre ball; snapped drags, Alt/Ctrl free), Move Type (Free Move, Translate, Rotate, Point to Point, Point to Position), X/Y/Z distances and angles with live preview, a pivot input; the triad is one shared module (gizmo.rs); UI scenario s27
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
fba397ff65
Pattern Features also picked on the canvas: a face stands for the feature that made it (traced through the timeline states, cached per revision)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:14:29 +00:00
bherbruck and Claude Opus 5.5
294597cc96
Face colours and opacity in STEP and 3MF export (and STEP import)
...
- Bodies carry a Paint for export (opacity, per-face colours), set by
Document::painted from the appearance model. The paint comes from a
face appearance, a body/component appearance's opacity or a material
look (Glass), and falls back to the paint the body was imported with.
- STEP: faces with colours of their own get a STYLED_ITEM on their
ADVANCED_FACE. See-through looks add SURFACE_STYLE_TRANSPARENT.
Differently coloured pieces are not merged into one face.
- STEP import reads face styles and transparency. The reader tracks the
file face of each kernel face (bands split in two keep it), so imported
face colours land on the right faces; the design shows them through
face_colors.
- 3MF: per-triangle colours (pid/p1 into the base materials, carried
through welding) and the object's alpha (#RRGGBBAA).
- Tests: a blue half-transparent cube with a red top exports, re-imports
with its opacity and the red top face, and keeps it when opened and
exported again. 3MF writes the alpha and the face entry.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:02:10 +00:00
bherbruck and Claude Opus 5.5
8045904c54
Lofts through three or more sections are smooth: each side is one B-spline surface through every section (the middle sections leave no edges); two sections stay ruled
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:48:12 +00:00
bherbruck and Claude Opus 5.5
06186be555
Press Pull on a fillet's or chamfer's face edits that feature's size by the distance (found through the face's persistent name); on another curved face it offsets the face, with the rest of its surface (both halves of a hole's wall)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:39:34 +00:00
bherbruck and Claude Opus 5.5
59b59a83e6
UI scenarios: the user's four open bugs as ignored targets (s31 sketch on a face projects its loops, s32 a cut in the active component leaves others alone, s33 Move opens at 0 and its X arrow moves along X, s34 moving a component carries its sketches); Fold, configurations, motion study and autosave/recovery enabled against the landed features (s22–s25); retests: fillets follow their edge after a sketch edit (s06 volume, s15 widens the sample plate), one canvas panel (s19); s30 patterns a hole as a feature (ignored: one hole results). Harness: manipulator handles published by name (scenario::publish_handle; ui.at {handle}; timeline items as timeline:<name>), restart after a crash or close, autosave into the scenario's folder, exact widget text before menu-label prefixes, checks for sketch curves, body volume and sketch points in the world
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:27:43 +00:00
bherbruck and Claude Opus 5.5
0a1b6f0fff
STEP export: pieces of a plane or extruded cylinder written as one face
...
Fusion round trip WARNs on face counts:
- 48: the pulley's annular end faces arrived as 240° and 120° sectors.
- 54: the side faces and holes of a body glued to its mirror image came
in halves.
Changes:
- Planes merge: PLANE faces and flat B-spline sheets, as well as revolved
planes. A plane keeps several loops (an annulus, a face with holes), no
seam. Flat B-spline sheets are written as PLANE.
- Pieces of an extruded cylinder (B-spline sheets) merge when their edges
are circles square to the axis. The merged face is written as a
CYLINDRICAL_SURFACE, with its parameter seam on the face's seam edge.
- A full turn's loop is built explicitly: ring, seam, other ring (or the
apex on the axis), seam back. Before, it depended on edge order, and
after 81c85b5[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:16:39 +00:00
bherbruck and Claude Opus 5.5
c009bb2c2a
Menus take the keyboard (Up/Down choose a row, Enter runs it); F2 renames the selected body, sketch, feature, plane, component or canvas
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:08:43 +00:00
bherbruck and Claude Opus 5.5
0ee343b9e6
Shell and offset faces on cones and spheres too (a dome moves to a smaller sphere about its centre, a cone's apex slides along its axis); surface fitting robust to poles and half cylinders; a shell retries on the unhealed body when the healed one won't cut
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:59:50 +00:00
bherbruck and Claude Opus 5.5
fec99468d2
Capture Position question: starting a command or saving while components were moved without capturing asks Capture Position / Revert / Cancel, then goes ahead; ui.capture control method
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:52:22 +00:00
bherbruck and Claude Opus 5.5
9bd7c8eb33
document.units: unit-less user parameters that would change meaning keep the old unit written out (values are compared before and after); test with a length and a count
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:52:22 +00:00
bherbruck and Claude Opus 5.5
8dbecb462a
Fold dialog (SHEET METAL > Fold); configurations and motion study dialogs pass their scenarios
...
Fold: the bend line (a sketch line), an optional stationary side, Bend Line Position
(centerline, start, end, outside mould line), angle (on the canvas), bend radius (default from
the rule) and flip; live preview and Edit Feature (folds made from two points keep them). Its
own icon; listed after Hem on the SHEET METAL tab and in the timeline.
Configurations: Add Column lists parameters and features to pick, Add Row names the new row
Configuration<N> when no name is typed, bare numbers show with their parameter's unit, the row
name comes before its Activate button, and Enter commits a cell instead of closing the panel.
Motion Study: steps default to the engine's 100, the key's value row is "Value" and Enter there
commits the key (OK makes the study).
Scenarios s22 (fold, flat pattern, DXF; the expected volume is the folded sheet's, the bend
keeping the neutral layer), s23 (configurations) and s24 (motion study) now run.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:42:52 +00:00
bherbruck and Claude Opus 5.5
1c12fa83b0
Holes: a tapped hole takes the tap drill of its thread (major − pitch) when no diameter is given, and clearance: "M6" (fit close, normal or loose) gives the ISO 273 clearance diameter
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:24:04 +00:00
bherbruck and Claude Opus 5.5
a901dade04
Browser: joints use the shared context menu (Edit Joint, Drive Joint, Suppress, Delete, Rename)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:09:31 +00:00
bherbruck and Claude Opus 5.5
13070abc55
Document Settings: design units (document.units: mm, cm, m, in, ft; values keep their meaning) from the browser's Units row, display precision row; new designs take the preferred units; the Properties window shows lengths, areas and volumes in the design's units with the chosen precision
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:09:31 +00:00
bherbruck and Claude Opus 5.5
c99e7e41ec
Preferences window (File › Preferences): theme, units of new designs, recovery copies every N minutes (to a Recovery folder beside the preferences), mouse presets (Fusion, SolidWorks, Inventor), reverse zoom, orbit around the point under the cursor, grid, perspective, visual style, display precision, anti-aliasing (on restart), sketch and selection options; all kept between runs; ui.prefs control method
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:09:31 +00:00
bherbruck and Claude Opus 5.5
bfa70f005b
Help menu (? on the application bar): About SolveCraft (version, commit, build date, ATTRIBUTION.md, fonts, licences), Keyboard Shortcuts read only, Report an Issue copies diagnostics (version, OS, GPU); ui.help control method
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:09:31 +00:00
bherbruck and Claude Opus 5.5
5096bf2442
Dialogs for contact sets, motion studies, exploded views and configurations; Drive scenario
...
Wired to solvecraft-params' contact, motion, explode and configuration commands (verified under Xvfb: a study keyed 0 to 60 deg plays, an explosion previews and OK keeps it, Activate switches configurations, Check collisions lists overlaps):
- Contact Set: components to a new set; the sets with suppress and delete; contact on/off;
Check collisions (contact.check).
- Motion Study: tracks of keyed joint values on a strip under the steps, keys added and edited
at the playhead, a step slider with Play; the pose at the step is shown (motion.play on a
scratch copy, as pending moves) and put back when the dialog closes.
- Exploded View: a scale slider showing the explosion live; OK creates and shows the view.
- Configurations: the table (rows by columns of parameters and suppressed features), cells
edited in place, Activate per row, rows and columns added and removed.
The ASSEMBLE panel lists the motion and contact commands once they exist. Tests for the pose,
table and study mappings.
Scenario s13: Drive Joints takes typed input without a click.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:02:55 +00:00
bherbruck and Claude Opus 5.5
46f3ff713d
Fillets of edges meeting at corners in any selection order: blends go one at a time in an order that works (a run along a planar loop waits for a selected edge meeting its inner corner, then bridges the arc it left), so three edges at a box corner give a sphere octant
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:54:09 +00:00
bherbruck and Claude Opus 5.5
3d384c7de7
Retest: joints mate face to face and Drive Joints takes the keyboard ( 4c3a5d9): s07/s20 type the angle straight away and check B sits on A's top (z 10..20); harness bbox check measures bodies as placed
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:45:44 +00:00
bherbruck and Claude Opus 5.5
6653db806e
Joint dialog after the engine's mating default: the dialog's Flip is the command's flip (no double flip with 4c3a5d9); Appearance dialog on the new appearance model; AppearanceCommand takes a colour with any name (the dialog's palette names)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
2c383460e9
Joints mate by default (Fusion's convention): origin B's z is turned against origin A's, so two picked faces meet face to face and B sits on A instead of inside it; Flip now means don't mate. File format 4 inverts older joints' flip so they keep their placement; as-built joints and rigid groups stay where they are
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
d12c955220
ROADMAP: M5 status
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
e7a85b30f7
Persistent naming: joint origins on faces and circular ends, and face appearances, store the face's name and find it by name first (a joint whose face is gone reports it instead of attaching elsewhere)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
e7aff4fef0
Persistent naming: shell, draft, offset-face and replace-face faces and hole placements store their faces' names (Feature.face_names) and are moved onto the named face before evaluating (a split face: the nearest piece, with a warning; a vanished face: the picked point, with a warning)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
99886594e7
Persistent naming: sketches on faces store the face's name and find it by name first (an upstream feature that adds a nearer parallel face no longer moves the sketch); a vanished face falls back to the old geometric search with a warning
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
452ee5f9f9
Persistent naming, step 2: revolved faces named by the section curve they sweep and their angle caps, box faces by side (+x … -z), cylinders by top/bottom/side, and pattern and mirror copies after their sources through the instance transforms (<source>@F<pattern>.<instance>)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
72297047d5
Persistent naming, step 1 (plan/adr/0002): faces are named from their history (a face lying on an input face keeps its name; new faces by role: F<feature>:side:<sketch curve>, :start/:top/:bottom caps, :blend:<edge>, …; split pieces #k along their spread), edges by the faces they separate (pieces ~k); names worked out lazily per body and shared by its clones; fillets and chamfers store edge names and resolve by name first (a split edge takes the piece nearest the picked point with a warning, a vanished one falls back to the point with a warning); model.faces and model.edges report names; tests for resize, suppress, reorder, an upstream split and a removed sketch segment
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
3efe347809
Appearance API for the dialog: faces as {body, point} too, library entries carry a category, appearance.list gives in_design (each look used, with its bodies, faces and components)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
99385b1e31
Fillets and chamfers keep their edges through upstream edits: each picked edge remembers its direction and its body's bounding box when picked (Feature.edge_refs, set by the commands and by timeline.edit); a reference point that is off every edge after an edit is carried to the same place in the body as it is now and kept when an edge running the same way is there (QA s06: a fillet on the right top edge follows the edge when the sketch widens); otherwise the nearest edge with a warning as before
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
