* test: reproduce #266 (Multi-profile solid.extrude with body_name names only the first body)
* fix: name every body of a multi-body feature after body_name (#266)
A new-body feature that makes more bodies than it was given names now stores Ribs (2),
Ribs (3)... for the rest instead of falling back to generic BodyN names. Command-time only:
saved designs keep their names.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
* fix: keep body_name list for the multi-body naming step (#266)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* test: reproduce #264 (Sheet metal: collinear tabs cannot be folded or flanged together)
* fix(sheet): fold and flange tabs that sit side by side on one line (#264)
A fold's bend zone and a flange's setback were cut with an infinite line, so
a second tab on the same line blocked a fold ('slanted or curved edge') and
two tab-end flanges in one feature shared one trimmed edge (nonmanifold).
When the zone falls apart into pieces, fold only the pieces the fold points
span, each as its own bend; trim a flange's setback only from the material
along its own edge, and attach each flange to the edge it was picked on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
- Remove xtask/data/fusion-catalog.tsv and xtask/data/fusion-ids.tsv.
- Remove the legacy command-id table (crates/engine/src/legacy_ids.rs) and its use in
find_command and in the shortcut, recents and pinned-command loaders. Only SolidCraft's
dotted ids name commands; any other id is an unknown command.
- Boundary Fill's id becomes solid.boundary_fill.
- Replace the parity report with SolidCraft's own feature checklist: `cargo xtask features`
writes docs/features.md from the command registry.
- docs/oracle.md, docs/step-import.md (corpus section) and docs/iges-import.md: reference
results are being rebuilt on analytic and open-source (FreeCAD) values; see #292.
`cargo xtask oracle` and `cargo xtask step-corpus [--iges]` write these placeholders.
- AGENTS.md, CLAUDE.md, CONTRIBUTING.md, README.md, ROADMAP.md and the book describe
SolidCraft as independent, with reference tests on analytic values and open-source tools,
and agents do not drive or extract data from commercial CAD products.
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: Claude Opus 5.5 <[email protected]>
* test: reproduce #261 (Rectangular pattern of a hole cut scales super-linearly)
* Patterns of many hole cuts scale near-linearly (#261)
Two quadratic costs:
- Meshing a face tested every point against every segment of every boundary
loop, so a plate face with hundreds of holes meshed in quadratic time. The
vendored truck-meshalgo inside test now skips loops whose parameter box is
clear of the point (they wind zero times around it).
- A pattern cut each copy in turn, rebuilding and re-checking an ever more
complex target per copy. Copies whose boxes are clear of each other are now
one tool of many pieces (kernel::union_apart, no intersection work), cut once.
512 holes now take ~7 s instead of not finishing. The test's volume tolerance is
widened from 1e-6 relative to 0.1 % of each hole: the measure meshes the bores
and reads each hole ~0.06 % small, on main too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Hole-pattern test: a budget CI can meet; coarser apart-box meshes (#261)
CI runs every test binary at once and is about ten times slower than a
machine running this test alone (15 tests passed 60 s in the last run), so the
512-hole pattern (about 6 s alone) hit the 60 s timeout there. The budget now
only has to tell linear from the quadratic hang: 300 s timeout, 120 s budget.
union_apart meshes each copy coarsely (2 % of its size, box grown by twice that).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Hole-pattern test checks the scaling, not a wall-clock time (#261)
CI runs every test binary at once: the 512-hole pattern (about 6 s alone, 10 s
CPU single-threaded) took 177 s there, so no fixed time is reliable. The test
now patterns 128 and then 512 holes and requires the second to take under 8x
the first (linear is 4x, measured 3.5-4.2x here; the old quadratic cost was 16x
or more), each with the volume check and a 900 s hang guard.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* test: reproduce #268 (Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall)
* Sew refuses edges whose ends weld to one vertex (#268)
The sewer welds vertices on a 1e-6 grid but only rejected edges shorter than
1e-9, so a sliver edge between the two welded its ends into one vertex and
truck-topology panicked ("Two same vertices cannot construct an edge") inside
the guard. Such an edge is now a degenerate-edge error before any truck call,
and the boolean takes its usual fallback.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Reject ambiguous origin and construction plane names
* Reserve origin plane names for construction planes; suggest the other alias
A construction plane can no longer be created with or renamed to XY, XZ, YZ, Top, Front or
Right, so a plane argument can't become ambiguous in new designs. For older designs that
already hold such a plane, the ambiguity error now also names the origin plane's other
alias (XY for Top...). The existing tests build those legacy names directly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* test: reproduce #265 (Renaming a pattern copy renumbers the remaining copies)
* fix: renaming a body keeps its sibling bodies' names (#265)
body.rename pinned only the names of the feature's bodies before the renamed one, so unpinned
pattern copies after it were renumbered into the freed name. Pin every sibling's current name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* test: reproduce #263 (sheet.fold accepts a fixed point that is not on the sheet)
* fix(sheet): refuse a fold's fixed point that lies off the sheet's material (#263)
A fixed point inside a cut-out or outside the base outline (in the panel's
thickness) silently picked a side. Refuse it with an error that names the
point; side-face picks and points on other panels keep working.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Fillets along a straight edge between two cylinders: the rolling-ball blend trims curved cap edges to its contacts
The edge where two overlapping extruded arcs meet is a straight line between two cylinders
ending on planar caps. The rolling-ball blend built its sections and surface, but only
straight seams could be shortened to the contacts, so a circular cap edge was refused with
"a curved edge where the blend ends". Curved seams now keep the part of their curve between
the new ends, found from the nearest of a few samples (a search from the far end of a long
arc can settle on the opposite side of the circle).
The ball's surface projections start from each face's last answer instead of a cold search,
falling back to one when the warm answer leaves the surface's parameters or is farther than
the last point: about 4.5x faster per fillet (370 -> 80 ms), so dragging the radius is usable.
Fixes#237
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Curve blend: refuse a closed curved seam where the blend ends
A seam that starts and ends at the same vertex (a full circle) has no
"between" two contacts, so trimming it built a broken edge. Return
"not supported yet" instead. The curved-seam trim moves into
trim_curved_seam so it can be tested directly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
* test: reproduce #262 (sheet.fold: bend zone reaching the blank outline is reported as a slanted or curved edge)
* fix(sheet): name the bend zone reaching an outline corner instead of blaming a slanted edge (#262)
A fold whose bend zone contains a corner of the panel outline (a fold at a
tab's root) was reported as crossing a slanted or curved edge. Name the
corner and how far to move the fold line to clear it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Honor design units in sketch dimensions and measurements
* fix: apply document units to specialized length controls
* Accept explicit units in length fields; document design-unit dimension values
Length fields in a design-unit control now evaluate what is typed as a
length expression: a bare number stays in the design's units, while an
explicit unit ("10 mm", "0.5 in", "1 in + 5 mm") is converted.
Document that a bare numeric sketch.dimension value from scripts, the
control channel or MCP is read in the design's units.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
sheet.flange now lists name?/body_name?, solid.loft and solid.sweep list
targets?/name?/body_name?, and the primitives list name?/body_name? (all go
through add_feature, which reads them). A test pins the shared keys for
every body-creating feature.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
- Web: a failed CJK font fetch shows English for this session only; the
saved language preference is kept (CjkFontLoader, persisted on save).
- Web fetches the CJK font only when a CJK language (ja) is selected.
- fonts.rs: directory scans match CJK-specific names only (no "noto" or
"gothic"); CJK stays the last fallback after the Latin UI font.
- Revert unrelated clippy rewrites in component_clone.rs, coplanar.rs,
canvas.rs and issue_report.rs to match main.
- Tests: default English, fallback order, CJK-only matching, fetch only
for CJK, failed fetch keeps the saved language.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
construct.plane.offset now takes a planar face as its base
({"face": [x,y,z], body?, index?, path?}), captured with the same exact
face attachment a sketch on that face uses. The Offset Plane dialog accepts
planar faces as well as origin and construction planes.
A construction plane on a face is resolved through its face anchor when the
timeline is evaluated, so it follows the face when upstream features change
(and after reopening), instead of keeping the plane as it was when picked.
Tests: engine (top and side faces, follows a box resize, survives reopen,
hostile picks are refused without adding a feature) and a UI scenario that
picks a face in the dialog and builds a pad on the new plane.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
sketch.construction set `construction` but left `centerline` on, so the
curve stayed a centerline (drawn dash-dot, still marked as an axis) until
it was first switched back to normal. Making a curve construction now
clears its centerline flag, mirroring sketch.centerline.
The control channel read each request with no length cap, so a client sending
gigabytes without a newline made the server thread allocate until the process
was killed. Read lines against the 16 MiB cap the MCP server already uses, now
one shared constant, answer a longer one with an error and close; close a
connection after eight lines that are not JSON, serve at most sixteen
connections at once, and run at most sixty-four queued requests per frame so a
flood cannot starve drawing.
Every file command checked the size with the metadata and then read to the end.
A character device such as /dev/zero reports a length of 0, so the cap passed
and the read was unbounded; a FIFO blocked the calling thread, which over the
control channel is the thread drawing the window. vfs::read now takes the
caller's cap, refuses anything that is not a regular file before opening it,
re-checks on the handle to close the window between the two, and reads no more
than the cap plus the byte that proves it was exceeded. Callers pass the limits
they already had, and the recovery read and the CLI's own reads go through it
too. `solvecraft-cli eval /dev/zero` and a FIFO now fail at once instead of
never returning.
Fixes#147
Co-Authored-By: Claude Opus 5 <[email protected]>
(cherry picked from commit 4156e8acd11c90c435a54a3b0ccc59991db71b12)
A Join unioned its tools into the first target only, leaving other target
bodies the tool overlapped or touched as separate, interpenetrating bodies.
Each tool now merges with every target it meets (shared material or face
contact, tested on the operands' boundaries) into one body under the first
one's name; absorbed bodies are removed and their threads follow. A tool that
meets no target still joins the first target as a separate lump. Sheet metal
and mesh bodies are never absorbed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
