OneCAD

1b-agent/OneCAD

0 Fork 0

forked from 1b-agent/solidcraft-upstream

Files

T

History

bherbruckandClaude Opus 5.5 6cb3025b72 Sheet metal: a hole drilled into a rim is a bore its panel keeps (#560 ) (#955 )

A hole drilled along a panel, into its rim, has no place in the flat pattern
as a cut-out, so every such hole was refused. It is now kept as a bore of that
panel, in flat coordinates, and cut only from that panel's material when the
folded part and its flat pattern are built, so the sheet still unfolds and
folds back with it. A hole that would run into a bend, or cross a panel at an
angle, is still refused. The flat pattern lists the bores.

The action matrix worker takes ACTION_MATRIX_ONLY (just these actions) and
ACTION_MATRIX_UNFOLD (unfold and refold every sheet after each action) for
rechecking one group by hand.

Co-authored-by: Claude Opus 5.5 <[email protected]>

2026-10-14 02:31:19 -04:00

browser.rs

Renaming a body rewrites only the references to it (#875 )

2026-10-13 18:47:10 -04:00

clipboard.rs

Feature history on the left side, with contiguous folders (#449 )

2026-10-13 13:01:31 -04:00

component_clone_assembly_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

component_clone_assembly.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

component_clone_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

component_clone.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

component_link.rs

feat: insert another design as a linked component (#596 )

2026-10-13 06:40:58 -04:00

component_properties_tests.rs

Unstitch and Reverse Normal (#856 )

2026-10-13 16:45:31 -04:00

component_properties.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

component_transfer_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

component_transfer.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

component.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

config_certificate_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

config_style_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

config.rs

feat: user-defined physical materials stored in the design (#532 ) (#606 )

2026-10-13 04:47:23 -04:00

construct.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

contact_sweep_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

contact_sweep.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

delete.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

diagnostics.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

edit_tests.rs

Feature history on the left side, with contiguous folders (#449 )

2026-10-13 13:01:31 -04:00

edit.rs

Feature history on the left side, with contiguous folders (#449 )

2026-10-13 13:01:31 -04:00

face_tests.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625 )

2026-10-13 05:26:29 -04:00

face.rs

fix(engine): pick the face of a named body where bodies meet flush (face_body) (#710 )

2026-10-13 10:51:57 -04:00

features_more_tests.rs

Cut an extrude's profiles that stand apart in one boolean (#848 )

2026-10-13 18:29:49 -04:00

features_more.rs

fix: a size worked out from a bare diameter keeps its unit when the design's units change (#716 ) (#779 )

2026-10-13 12:35:25 -04:00

features.rs

Holes on round faces from the app, and Flip for holes at sketch points (#980 )

2026-10-14 02:10:09 -04:00

file_thumbnail.rs

Add bounded portable Home thumbnails to design files (#518 )

2026-10-13 05:20:47 -04:00

file.rs

Preferences › Sketch: auto-projection holds across designs (#680 ) (#959 )

2026-10-13 23:49:51 -04:00

inspect.rs

Open large designs faster: meshes, face names and Measure on all cores (#916 )

2026-10-13 19:49:04 -04:00

joints_tests.rs

fix: inspect.interference prunes by bounding-box sweep instead of refusing more than 200 bodies (#536 )

2026-10-13 02:29:45 -04:00

joints.rs

fix: inspect.interference prunes by bounding-box sweep instead of refusing more than 200 bodies (#536 )

2026-10-13 02:29:45 -04:00

kernel_heal_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

lineage_face_tests.rs

Sheet metal rims and holes, plastic features, lofts, raised pieces and merged walls take face attachments (#677 )

2026-10-13 09:13:09 -04:00

materials.rs

feat: user-defined physical materials stored in the design (#532 ) (#606 )

2026-10-13 04:47:23 -04:00

measure_sel.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

mesh.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

mod.rs

Surface toolset: icons and planned commands (#808 )

2026-10-13 14:28:38 -04:00

motion_tests.rs

fix: confine MCP agents' files to allowed folders; recovery discard deletes only recovery entries (#205 ) (#578 )

2026-10-13 18:24:08 -04:00

motion.rs

fix: confine MCP agents' files to allowed folders; recovery discard deletes only recovery entries (#205 ) (#578 )

2026-10-13 18:24:08 -04:00

move_in_sketch_tests.rs

Make SolveApp::start honour a command's enabled flag, and disable solid.move inside a sketch (#740 )

2026-10-13 11:43:45 -04:00

occurrence_tests.rs

feat: insert another design as a linked component (#596 )

2026-10-13 06:40:58 -04:00

offset_edit_guard_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

offset_identity_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

offset_plane_face_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

offset_topology_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

parameters_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

parameters.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

parts.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

patterns_tests.rs

test: measure a scaling pair again when the load of other test binaries spikes (#649 )

2026-10-13 09:38:28 -04:00

plastic.rs

Lip: run along the rim's opening, not the foot of a boss standing on the face (#933 )

2026-10-13 20:26:24 -04:00

render.rs

Render: add backend capability discovery and strict request resolution (#650 )

2026-10-13 10:17:41 -04:00

revolve_convention_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

section.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sheet_convert_tests.rs

Convert to Sheet Metal keeps a plate's round holes round (#977 )

2026-10-14 01:47:40 -04:00

sheet_tests.rs

Sheet metal: a hole drilled into a rim is a bore its panel keeps (#560 ) (#955 )

2026-10-14 02:31:19 -04:00

sheet.rs

Sheet metal: a hole drilled into a rim is a bore its panel keeps (#560 ) (#955 )

2026-10-14 02:31:19 -04:00

sketch_3d_frame_tests.rs

fix: a projected edge stays the edge that was picked when its body changes (#730 )

2026-10-13 12:06:13 -04:00

sketch_3d.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_axis_ref_tests.rs

Sketch: accept redundant but consistent constraints (#687 ) (#699 )

2026-10-13 10:12:55 -04:00

sketch_canvas.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_constraints_tests.rs

Sketch: accept redundant but consistent constraints (#687 ) (#699 )

2026-10-13 10:12:55 -04:00

sketch_constraints.rs

Guide sketch patterns with live previews and editable offsets (#966 )

2026-10-14 01:58:01 -04:00

sketch_corner_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_create.rs

Sketch text: bold and italic, text along a curve, alignment and spacing (#852 )

2026-10-13 19:27:35 -04:00

sketch_dimensioned_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_dimensioned.rs

Rounded Rectangle sketch tool (#891 ) (#948 )

2026-10-13 23:52:10 -04:00

sketch_drag_live_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_drag.rs

Let the conic tool take a typed Rho, and preview the curve it is about to draw (#736 )

2026-10-13 11:47:28 -04:00

sketch_face_tests.rs

Sketch on every side wall of one sketch extruded up and down (#957 )

2026-10-14 01:00:04 -04:00

sketch_face.rs

Sketch on every side wall of one sketch extruded up and down (#957 )

2026-10-14 01:00:04 -04:00

sketch_freeform.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_fuzz_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_ids_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_import.rs

Sketch text: bold and italic, text along a curve, alignment and spacing (#852 )

2026-10-13 19:27:35 -04:00

sketch_inspect.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_model_plane_tests.rs

fix: sketches on planes built from the model can project, intersect, include and hold text (#459 )

2026-10-12 21:27:28 -04:00

sketch_modify_tests.rs

Guide sketch patterns with live previews and editable offsets (#966 )

2026-10-14 01:58:01 -04:00

sketch_modify.rs

Guide sketch patterns with live previews and editable offsets (#966 )

2026-10-14 01:58:01 -04:00

sketch_perf_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_project_edge_tests.rs

fix: a projected edge stays the edge that was picked when its body changes (#730 )

2026-10-13 12:06:13 -04:00

sketch_project_side_tests.rs

fix: a dimension from linked geometry keeps its side when the source moves past it (#614 )

2026-10-13 05:15:15 -04:00

sketch_project_tests.rs

Preferences › Sketch: auto-projection holds across designs (#680 ) (#959 )

2026-10-13 23:49:51 -04:00

sketch_project.rs

fix: a projected edge stays the edge that was picked when its body changes (#730 )

2026-10-13 12:06:13 -04:00

sketch_rect_tests.rs

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

sketch_redundant_tests.rs

Sketch: accept redundant but consistent constraints (#687 ) (#699 )

2026-10-13 10:12:55 -04:00

sketch_robust_tests.rs

Sketch Trim/Extend/Offset robustness: Extend reaches splines, ellipses and conics (their polyline, then pinned on the curve); Offset refuses a distance its shape can't take (a straight piece overrun by its neighbours) instead of drawing a turned-inside-out copy; adversarial tests for trims (chords, tangent touches, lone lines, collinear overlaps, splines, ellipses, hostile points), extends and offsets (rectangles in and out, slots, splines, a spike, hostile distances), each leaving the sketch sound

2026-10-10 00:14:00 +00:00

sketch_rounded_rect_tests.rs

Rounded Rectangle sketch tool (#891 ) (#948 )

2026-10-13 23:52:10 -04:00

sketch_support.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389 )

2026-10-12 17:17:01 -04:00

sketch_text_move_tests.rs

Sketch text: bold and italic, text along a curve, alignment and spacing (#852 )

2026-10-13 19:27:35 -04:00

sketch_ux_tests.rs

Construction Geometries, a Sketch Palette row that hides construction geometry (#804 )

2026-10-13 15:15:13 -04:00

sketch.rs

Guide sketch patterns with live previews and editable offsets (#966 )

2026-10-14 01:58:01 -04:00

solid_move_copy_tests.rs

Give solid.move the copy half of its Move/Copy label (#498 )

2026-10-13 01:54:01 -04:00

stacked_face_tests.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625 )

2026-10-13 05:26:29 -04:00

surface_analysis.rs

Surface toolset: icons and planned commands (#808 )

2026-10-13 14:28:38 -04:00

surface.rs

Offset Surface: faces copied out at a distance, exact or fitted (#758 ) (#872 )

2026-10-13 22:34:16 -04:00

urdf_tests.rs

URDF export for robot simulators (#719 ) (#942 )

2026-10-13 21:52:30 -04:00

view_navigation.rs

feat(ui): offer a cube navigator alongside signed axes (#664 )

2026-10-13 09:28:52 -04:00