A coincident face is pushed apart only when the space it moves through holds nothing that changes the result; otherwise the boolean falls through to the exact strategies.
Co-authored-by: NOWN-DEV <[email protected]>
The partial-contact imprint (#704, #751) split every face in the contact plane against every tool face, one call per face, and measured all the tool's cylinders for each pair: the sensor enclosure's Case shell went from 6.6 s to 76 s and timed out in the CI matrix. Only faces near the contact are split now, each surface once, in one call: 7.0 s.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Loading a design (from a worker's start or restart to its first output) gets 300 s; each action keeps 90 s. oracle/41-tube-radial-holes (about 23 s here) timed out loading on a loaded CI runner, and reloads after a hung action were charged to the next action.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
sketch.pattern.rectangular gets a tool window with both quantities and spacings and an optional direction, instead of a click flow with a fixed count.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17.
Refs #757
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Per-face target side lengths, the caller's facet angle, refined grid lines, and fixes for underflowing coordinates and straight edges ending exactly on their vertex. Nothing drawn changes yet.
Refs #303
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A mesh over the conversion budget is refused with its triangle (or vertex) count, the limit, and that only constant-section parts convert.
Refs #346
Co-Authored-By: Claude Opus 5.5 <[email protected]>
STL (binary and ASCII) now welds each body's export mesh with the same tolerance as 3MF, so filleted and drilled bodies are closed. The weld grid's neighbour lookup no longer overflows for bodies far from the origin.
Fixes#784
Follow-up to #718: a face place snaps only to sketch points that are shown, and the face under the cursor is looked up once per pick.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Adds oracle case 81 (a box edge rounded at a clamped cubic B-spline radius) with analytic expected values, and passes spline fillets through recipes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Icons for the surface toolset, and its planned commands registered and disabled with the issue that tracks each one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sketch Move gets a toolbar placement in Sketch > Modify and a Move/Copy tool window with X and Y distances, an angle, an optional centre point and a Create Copy flag, replacing the context-menu route that ran the command with no parameters.
A command dialog opened while sketching no longer hides the Sketch Palette: the dialog docks at the left of the viewport and the palette keeps the right. A view too narrow for both keeps the dialog alone.
Right-clicking a curve or point of a sketch that isn't being edited now opens that sketch's own menu, with Edit Sketch, instead of the body menu. Solid geometry in the selection keeps the body menu.
Sketch Mirror now opens a tool window with Entities and Mirror line inputs, so both picks stay visible and editable until OK, replacing the old click-then-right-click flow.
Completes the Japanese catalog (all commands, panels, dialogs and preferences) and routes the remaining hard-coded UI labels through the translation lookup. English stays the default.
The feature history can sit in a panel on the left, with folders that hold one unbroken run of features, drag and drop as one undo step, and a resizable divider. Timeline folders save under format 17.
26 baseline actions that fail on main: 17 are the retry guard's refusals of geometry that used to delete a body or fill past an edge (#644), 9 vary between runs (#707). Load timeouts left as they were.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A blend no longer re-rolls an edge it already refused unless a later blend came near it, so long curved chains stop paying for the same refusal over and over.
truck's face and edge IDs are their addresses, so walking maps keyed by them followed heap layout, and the ribbed lid's side-wall hole passed or failed by chance. The planar boolean's rebuild and glue now take truck's connected components in the shell's order, and the planar boolean's own maps are ordered. Healing's union-find keeps the lesser root and takes a run's ends in order of use. The face classification after an intersection orders each component's faces by the shell first. The lid now builds the same body on every run, with a test that builds it six times in one process. Its 0.5 mm side-wall holes, and one sensor enclosure hole of the same kind, now fail every time and are marked failing in the baseline.
Fixes#707.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A sketch's link to a projected edge now keeps the edge's persistent name and finds it by that name when the body changes, instead of taking whichever edge ends up nearest its point.
The Sketch Palette's line types are three drawn icons (solid, one gap, gap with a dot) instead of text glyphs, and the construction orange is now chosen by the caller (`fixed_accent` on the toolbar) rather than hardcoded in the icons.
Sketch Scale now opens a tool window with the entities, an optional base point and a typed factor, instead of running the command with no parameters and raising an engine error.
Adds `fit: taper` to Fillet: where a constant radius doesn't fit along a straight edge, it follows the room there as a smooth spline, down to zero where a face closes to a point. Taper to Fit is in the Fillet dialog, and the feature's warning says how far it tapered.
Outside a sketch, a sketch tool's shortcut opens Create Sketch on the selected plane or planar face (or asks for one), then starts that tool in the new sketch.
`SolveApp::start` now honours a command's enabled flag, so shortcuts, the command palette and the control channel can't start a disabled command, and Move is disabled while a sketch is open.
The MCP server instructions now point to `body_topology` for finding edge points (there is no `list_edges` tool), with a test that every tool the instructions name exists.
Robustness seed 16 failed in most runs: the imprint split a block's side along both halves of a cylinder's round side, and the second split re-traced the first circle, sometimes leaving a sliver the glue could not match. The imprint now splits along each surface once (10/10 runs pass, 3/12 before).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Adds a Feature Options section to the Sketch Palette with the running tool's modes as icon buttons, so you can switch between e.g. circle or rectangle variants mid-tool.
A cut or an intersection between prisms (a plate and the tools through it) is now decided in 2D before either operand is meshed. A body's size and volume are measured once, a placement reads its orientation from its matrix, the evaluation cache is bounded to 64 MiB, and STEP import copies fewer shells. Hole plates evaluate 20-30% faster with less memory, and models are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Convert to Sheet Metal now takes a solid or a shelled body by its bend edges (`bends`): the faces reached from the fixed face across those edges become the sheet, keeping the part's envelope, with the flat pattern by the rule's K-factor and radius. Other edges between sheet faces are cut open. The result works with edge flanges, cuts, Unfold/Refold, the flat pattern and DXF. A conversion without `bends` is the plate conversion as before. The optional `bends` field is noted under format 17. Fixes#647.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Extrude and Revolve from a body face take `face_body` to say whose face is meant where faces of several bodies meet flush at the picked point. Without it, an ambiguous pick now names the bodies that meet there instead of saying there is no face. Fixes#703.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The mouse wheel over a dialog's list, a drop-down or a menu that hangs over the model now scrolls only that list; the view zooms only when the pointer is really over the model. Fixes#678.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Box, Cylinder, Sphere, Torus and Coil dialogs now start their sizes in the design's units with the unit written out ("20 mm", "20 in"), like the other dialogs. OK makes the same sizes as before. Fixes#630.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A Single hole picked on or near a sketch point that lies on the face (a circle's centre) now goes to that point, as a Multiple pick does. Picks away from sketch points, or near one that isn't on the face under the cursor, stay where they were clicked. Fixes#657.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Dragging a text outline now moves the whole editable text, and Move/Copy shifts or rotates it as one piece (a copy stays independently editable). Content, font, height and outline identities are kept; a drag is one undo step and Esc restores the start.
With nothing selected, Extrude and Revolve no longer pre-pick the last sketch's profile when a feature already builds from it, so OK no longer cuts into a part nobody picked. Fixes#684.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
NOWN-DEV