CypherNaugh_0x
9c09e82cff
sketch.dimension reports measured on the solved sketch: it reported the value the geometry had before the new dimension was solved, so dimensioning a 99.84 mm trough line to 100 answered measured: 99.84 and looked like the dimension had not taken. The command now measures the new dimension again once the sketch is solved (driven dimensions too), through a new solvecraft_sketch::measure_dimension that shares the solver's own measuring. Tests: lengths, a driven distance and a diameter report their solved values
2026-10-11 00:01:19 +02:00
CypherNaugh_0x
81be4e74b8
browser.visibility hides and shows sketches, bodies, construction geometry and origin items (items: ids or names, or a whole folder; visible: bool), so agents can hide helper sketches over MCP. What is hidden moved from the egui UI state into the engine session (view state: not saved, not an undo step); the desktop eye toggles and menus use it, headless renders and fit leave hidden items out, and document.inspect, sketch.inspect and ui.inspect report visibility. ui.set still accepts hiddenBodies, hiddenOrigin, hiddenSketches and shownSketches. Tests: helper sketches hide and show in the engine (hostile input changes nothing) and through MCP only
2026-10-10 14:33:56 -04:00
CypherNaugh_0x
0321778d38
Perspective views no longer show hidden edges through solids: lines, decals and ghosts were pulled toward the eye by a fixed step in depth, and perspective depth is not linear in distance (near plane at about 0.1 % of the distance), so at the model that step spanned tens of millimetres and hole bottoms, the far side of bores and the back edges showed through the part (and through section caps). In perspective the point now moves toward the eye by a fraction of its distance (about 0.2 mm at 140 mm, like the orthographic step); orthographic is unchanged. Not covered by an automated test (no GPU in the test suite); checked in the app with before/after screenshots
2026-10-10 13:51:00 -04:00
CypherNaugh_0x
b5fd55cce6
Section Analysis cut faces hide the inside of the body: the cap was drawn on the far walls' back faces at their own depth, so every edge between the cut and the far wall (hole and boss edges, corner seams) showed through it like a pane of glass. While a section is shown the solids mark in the stencil where the cap is the visible surface, then draw the cap again there at the depth where the view ray meets the section plane (orthographic and perspective), so holes stay open and the inside is hidden. The native app asks for an 8-bit stencil; without one (eframe's web painter has none) the cap draws as before. Not covered by an automated test (no GPU in the test suite); checked in the app with before/after screenshots
2026-10-10 13:51:00 -04:00
CypherNaugh_0x
aa268f0f0e
Faster tests: hostile_params_never_panic shares its commands across threads (154 s to 20 s), the design-file fuzz test tries its seeded cases on all cores (21 s to 7.5 s), the kernel's tangent-primitive boolean test runs its three seeds at once, and the headless scenario harness skips the software viewport render it threw away every frame (scenarios 63 s to 26 s). kill_mid_save waits for the saver to reach a varying round instead of sleeping a fixed time, so it holds on a busy machine
2026-10-10 13:24:08 -04:00
CypherNaugh_0x
4a41de72ec
Autosave ids are unique within the process: an app restarted in the same second (the scenario harness crashes and restarts in one process) took the id {seconds}-{pid} of the crashed app, locked its entry again and so offered nothing to recover. The id now carries a per-process sequence number. Test: a restart in the same second still offers the crashed app's work
2026-10-10 13:24:08 -04:00
bherbruck and Claude Opus 5.5
524ef6b8c2
The up axis preference (Preferences > Design, ui.prefs up_axis) turns the view: the camera, home view, ground grid and orbit follow it, at startup too
...
Fixes #3
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 17:13:07 +00:00
bherbruck and Claude Opus 5.5
74f70614cc
Section Analysis: cut faces in their body's colour (tinted toward the cap colour) and hatched; snapshots show the section too (the cut part removed, hatched cut faces)
...
Fixes #51
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 17:05:23 +00:00
bherbruck and Claude Opus 5.5
c90070c497
Agent cursor speed: a slider from 1× to 5× with Instant at the far right. Instant no longer breaks: the command runs at once (as with the cursor off) and the pointer jumps to where it acted, with a click ripple. ui.agent_cursor speed takes 1–5 or "instant"; saved "slow" and "normal" read as 1×. Scenario covers 1×, 3× and Instant against the cursor-off result
...
Fixes #79
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 16:56:30 +00:00
CypherNaugh_0x
9508ee749c
Shell refuses a wall thicker than a rim instead of returning a corrupt body: the topology-preserving face offset now checks every planar face's moved loops, and a loop that turns inside out or two loops that cross (a rim or ledge narrower than the move, e.g. a bowl opening sliding past the slab's outer edge) is an error naming the spot. Before, the self-crossing cavity went into the boolean and the shelled body came back with roughly twice its volume and its centre of mass outside the body, so every later cut failed its volume check
...
The check is geometric, not a tuned threshold: on the reported basin (18 mm rim, sloped bowl wall) the rim strip reaches zero width at 15.17 mm and the shell is refused from there on. Tolerances only absorb rounding (scaled to the body size), and at most 2000 straight edges per face are compared pairwise. Arc edges and curved faces are not checked.
This is a guard, not the full fix. Building such a shell needs the offset to change topology: drop the strip that collapses and let its neighbours meet, as offset_body already does for rounds thinner than the move, extended to planar faces. That is substantially more work in the most delicate part of the kernel (rims, ledges, steps, arc-bounded strips) and is left for a separate change; until then the workaround is to model the hollow directly (an offset loft and a box cut).
2026-10-10 12:32:03 -04:00
CypherNaugh_0x
9a22d9df92
Section Analysis takes a world coordinate: inspect.section {plane, at} places the cut at that coordinate on the named plane's axis (XY: Z, XZ: Y, YZ: X), so XZ's -Y normal no longer flips the sign; the params doc gives each named plane's normal; the result reports axis and at for named planes. at with offset, or with an {origin, normal} plane, is an error
2026-10-10 12:29:46 -04:00
CypherNaugh_0x
5d5ff44db2
Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone
2026-10-10 12:08:19 -04:00
CypherNaugh_0x
49d6682fe7
Rectangles name their sides and corners: sketch.rectangle.two_point and .center return sides {bottom, right, top, left} (line ids) and corners {bottom_left, bottom_right, top_right, top_left} (point ids), so they can be dimensioned without a sketch.inspect round trip
2026-10-10 11:14:03 -04:00
David Gray and Claude Opus 5.5
d57e90a32a
View cube labels are printed on their faces: each face's name is laid out flat and mapped through the cube's projection, so it turns and foreshortens with the face and fades out as the face turns edge-on (instead of floating upright at the face's centre and vanishing past 70 degrees). TOP and BOTTOM read upright in the plan views clicking them turns to. Tests: every label reads upright in its own view and stays within its face from every direction
...
Co-Authored-By: Claude Opus 5.5 <[email protected]
2026-10-10 11:01:31 -04:00
David Gray and Claude Opus 5.5
03790f5509
View cube, move triad plane squares and the Offset Plane preview no longer flash lines while orbiting: faces turned nearly edge-on are drawn with projected_polygon (an unfeathered fill, outlined edge by edge) instead of egui's convex_polygon, whose miter joins shot spikes hundreds of pixels long at the slivers' sharp ends. Tests check everything drawn stays within each shape from 4050 view directions
...
Co-Authored-By: Claude Opus 5.5 <[email protected]
2026-10-10 20:28:08 +11:00
bherbruck and Claude Opus 5.5
be095132b9
Re-land of the shell branches on the renamed ids ( #6 ): the occurrence Move window goes through frame.rs like every window
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 07:19:58 +00:00
bherbruck and Claude Opus 5.5
8b60d77dad
Scenario s40 (toolbar customisation survives a restart) runs now
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 07:19:58 +00:00
bherbruck and Claude Opus 5.5
5f45f0789f
Status bar: commands by their labels ("Fillet done", "Shell: offset must be …") instead of internal ids
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 07:19:58 +00:00
bherbruck and Claude Opus 5.5
4812ec6c0b
Toolbar customisation: a command's menu (right-click a toolbar button, a panel drop-down row or an S box row) pins it to the toolbar, removes it or pins it to the S box's favourites; drag buttons to reorder within and between panels (drop line); Reset Toolbar; per workspace and tab, kept with the preferences, exported and imported with the keyboard shortcuts. Workspace switcher spans the toolbar's height and opens the workspace menu (Design; the others coming later)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 07:19:58 +00:00
bherbruck and Claude Opus 5.5
b5e74030c0
Occurrence Move/Copy uses the shared move triad (arrows, plane squares, rings, ball; snapped): distances and X/Y/Z angles, turning about the occurrence's starting origin, pending until Capture Position
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 07:19:58 +00:00
bherbruck and Claude Opus 5.5
9d3cbb4acc
Browser fold arrows: each row is one widget with a stable id, and where the click lands decides what it does (fold arrow with padding, eye, radio, or the row), so an arrow click toggles without also selecting or picking the row or starting a drag; Collapse/Expand tips; ui.at {browser|chevron} and ui.browser for automation; scenario browser_chevrons clicks every folder's arrow (document settings, named views, origin, groups, sketches, construction, canvases, components, bodies, the design) and checks the children; the inch-width units test runs now that params reads unit-less lengths in design units
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 07:19:58 +00:00
bherbruck and Claude Opus 5.5
fd4d38d31e
Test (ignored until params reads unit-less length parameters in design units): a bare inch width stays 50.8 mm when the design goes metric
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 07:19:58 +00:00
bherbruck and Claude Opus 5.5
535bd5dfff
Section Analysis visuals: the cut faces are hatched at 45 degrees in the cap colour, and each body's outline along the cut is drawn
...
Part of #51 (per-body cap colours and the cut in snapshots to follow)
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 07:11:40 +00:00
bherbruck and Claude Opus 5.5
794a394b28
Scenario acceptance_lip_on_rounded_rim enabled: the Lip on the enclosure's rounded rim works since #29 's fix
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 07:03:21 +00:00
bherbruck and Claude Opus 5.5
9dd901649c
View cube with Y up ( #3 ): the cube is drawn and clicked in the camera's up-axis frame, so TOP is the world's up; TOP and BOTTOM turn to the standard plan views (yaw 0). Scenario view_cube_y_up; the camera check can test the world direction the camera looks from
...
Refs #15 , #3
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 06:55:10 +00:00
bherbruck and Claude Opus 5.5
d1cdc4d061
Silhouette edges on curved surfaces: drawn in the surface shader where it turns away from the eye (about 1.5 px, only on the visible surface, so nothing shows through thin walls), in the viewport and live previews; snapshots draw them too. The back-face outline pass is gone
...
Fixes #48
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 06:45:19 +00:00
bherbruck and Claude Opus 5.5
62746045af
Fillet dialog: middle radii for variable fillets (add, remove, position and radius) and the Smooth toggle
...
Variable type shows a Mid Radius row per point (position along the edge from the start end, 0.01 to 0.99, and a radius expression, with a remove button), an Add Mid Radius button and, with points present, Smooth. They go to solid.fillet as mid and smooth and come back on Edit Feature. Test: the round trip and removing every point.
Refs #9
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 06:15:30 +00:00
bherbruck and Claude Opus 5.5
be18bd6573
Variable-radius fillets through middle points: radii at positions along the edge, straight or smooth between
...
kernel::fillet_variable_points(body, edge, start, [(position, radius)...], smooth): the radius law is a B-spline of the edge parameter (straight pieces, or C1 cubic pieces with Catmull-Rom slopes), and since every section's arc is affine in its radius the blend is exactly a rational B-spline (degree 2 across, the law's degree along) with B-spline contact curves on the faces. The largest radius along the edge decides whether the blend fits. Fillet type variable takes mid: [[position, radius expr], ...] and smooth; middle radii are parameters of the feature (Mid radius) and follow user parameters. Tests: straight pieces against (1 - pi/4) L (a^2 + ab + b^2) / 3 per piece, smooth against the integrated law, either end as start, refusals; engine test with a parameter-driven middle radius.
Refs #9
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 06:06:33 +00:00
bherbruck and Claude Opus 5.5
a7fe0429f0
IGES reader checked against Fusion's IGES exports: 75 of 76 reference parts read back exactly; cone tips read whole
...
`cargo xtask step-corpus --iges` (and `solvecraft-cli step-corpus --iges`) opens every oracle part.igs as File → Open does and compares body count, volume, area and face count with Fusion's measurements, writing docs/iges-import.md. The run found faces closing at an apex (a drill point's cone, a sphere's pole: the seam runs out to the apex and straight back) kept whole and meshed wrongly; they are now split along the iso-line opposite the seam like bands are (18-hole-features and 40-box-sphere-torus pass). The one failure left, 50-sweep-tight-bend, is written by Fusion as five loose, partly degenerate surfaces that Fusion cannot read back as a solid either; documented in the report. Test: a drilled blind hole round-trips through IGES.
Fixes #14
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 05:56:53 +00:00
bherbruck and Claude Opus 5.5
72bc6fb010
A pattern or mirror of a suppressed feature has nothing to copy: its copies go with it and the pattern warns (the acceptance enclosure loses all four standoffs when Standoff is suppressed); scenario acceptance_pattern_of_suppressed_feature enabled
...
Fixes #42
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 05:27:01 +00:00
bherbruck and Claude Opus 5.5
d1428ef27c
UI tests clear the frame's texture changes: no "Dropped TexturesDelta" panic in debug builds
...
drive_value_takes_the_keyboard and boundary_fill_finds_the_cells_and_fills_the_ticked_ones dropped egui's output with texture deltas still pending (epaint's debug check); they clear them as the scenario harness does. All ui-egui tests pass in a debug build.
Fixes #60
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 05:17:12 +00:00
bherbruck and Claude Opus 5.5
7318b98b8d
Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,)
...
Pages: General (theme Dark/Light/System, UI scale, units of new designs, autosave, display
precision, the agent cursor), Navigation (Fusion, SolidWorks, Inventor, Alias and Tinkercad
mouse presets, reverse zoom, zoom to the cursor, orbit centre, view-change animation on/off and
speed), Keyboard Shortcuts (the old Shortcuts window as a page: search, rebind, conflicts),
Design (default modelling orientation Y up / Z up for #3 , and the offer to stand up a Y-up STEP
or IGES file: a quarter turn about X as one undoable Move), Graphics, Sketch, Selection.
Changes apply at once; Cancel or Esc puts back what was there when the dialog opened, Apply
keeps them, OK closes, Restore Defaults resets the page. The theme, ground shadow and agent
cursor settings are now kept between runs. File and Help › Keyboard Shortcuts open the page;
the unused docked Preferences dialog is gone. Control: ui.prefs {open, button, stand_up, …}.
Scenario s45_preferences; tests for Cancel/Apply/defaults and standing a Y-up file up.
Fixes #36
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 05:09:03 +00:00
bherbruck and Claude Opus 5.5
132acc9863
Perpendicular Plane (construct.plane.perpendicular {plane, line}): the plane through a straight edge, sketch line or axis, square to a plane or planar face; a line square to the plane is refused (no single answer)
...
Fixes #20
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 05:00:55 +00:00
bherbruck and Claude Opus 5.5
0e2d8efd5c
See-through bodies and faces are drawn back to front: the glass triangles are re-sorted along the view direction when the view turns (more than about 2 degrees), so overlapping glass blends in order. Large triangles that cut through each other can still show a seam (sorted by centre)
...
Fixes #49
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 04:11:10 +00:00
bherbruck and Claude Opus 5.5
a5729f1f97
Constraint glyphs: one per constrained entity, beside it, readable
...
Fixes #43
- Two-entity constraints (parallel, tangent, equal, ...) get a glyph on each entity.
- Glyphs sit beside their entity (offset along its screen normal), step along it when crowded,
with a faint leader when pushed away; 15 px boxes with the toolbar's constraint icons
(H/V stay letters), coloured from the theme's glyph tokens in both themes.
- Hovering a glyph lights both of its glyphs and its curves/points and names the constraint.
- Removes the old duplicate glyph drawer in viewport.rs (it drew a second, green set).
- Scenario expect key `glyphs` ({constraint id: count}, none overlapping) and the scenario
constraint_glyphs_both_entities.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 03:27:42 +00:00
bherbruck
721c8b96a4
Merge pull request #55 from bherbruck/ci/agent-managed-releases
...
Use agent-managed draft releases from the release branch
2026-10-09 21:17:14 -04:00
bherbruck and Claude Opus 5.5
1e5356e056
Selected and hovered edges, and a selected face's outline, show dimmed where the model hides them
...
Fixes #50
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:51:37 +00:00
bherbruck
88b4c5b883
fix: preserve behavior under new Clippy lints
...
Keep the fixed ray direction explicit and simplify a single-element loop.
2026-10-09 20:18:05 -04:00
bherbruck and Claude Opus 5.5
a3a1d15d02
Test: Project and Include from other bodies (an edge, a face's loop, a silhouette, a 3D circle) follow a parameter edit of that body and are reported lost, not failed, when it is deleted
...
Part of #47 (components' occurrences wait for the frames fix, 62d22e2)
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:14:00 +00:00
bherbruck and Claude Opus 5.5
61f86d073d
Sketch Fillet: several corners at once (points: one radius dimension, the other arcs equal to it); a radius too large for a line corner is a clear error naming the length it needs, and nothing changes; tests for a constrained rectangle's corners (areas exact), line-arc and arc-arc corners, too-large fillets and chamfers, chamfer areas
...
Fixes #46
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:14:00 +00:00
bherbruck and Claude Opus 5.5
307ef11c0a
Sketch Trim/Extend/Offset robustness: Extend reaches splines, ellipses and conics (their polyline, then pinned on the curve); Offset refuses a distance its shape can't take (a straight piece overrun by its neighbours) instead of drawing a turned-inside-out copy; adversarial tests for trims (chords, tangent touches, lone lines, collinear overlaps, splines, ellipses, hostile points), extends and offsets (rectangles in and out, slots, splines, a spike, hostile distances), each leaving the sketch sound
...
Fixes #45
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:14:00 +00:00
bherbruck and Claude Opus 5.5
ab574952b1
Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane
...
Fixes #31
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:14:00 +00:00
bherbruck and Claude Opus 5.5
67c79ec91c
Lips on rounded, shelled rims: the band along the rim's edge is raised from the body's own faces (kernel::raise_band: the rim face split along the band's exact offset edge, the band's walls swept up from the walls below, a top), since a join can't merge walls that continue each other; grooves cut with a band reaching into the free side so no wall coincides; tests against the band's area times its height
...
Fixes #29
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:04:37 +00:00
bherbruck and Claude Opus 5.5
80f5a58806
Re-land the robustness batch on main ( #6 ): fillets running into an earlier round go to blend_corner (any radius) instead of the same-radius undo; the lip and drilled-hole regression tests move into tests/robustness.rs with the new command ids; measuring 5000 faces is checked for its counts, its time in an ignored perf test run alone
...
Part of #6
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:04:37 +00:00
bherbruck and Claude Opus 5.5
f967b8d3ff
Measuring bodies of thousands of faces: 13 s to 0.8 s for 5000 faces (the body's size was recomputed for every face); merged topology counts right on finely faceted bodies (vertices welded only when they coincide, planes merged only when parallel within 1e-9), with a test
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruck and Claude Opus 5.5
6ab39679e7
Rounding an edge that runs into an earlier round of the same radius (a box's edges filleted one at a time, the first tutorial): the earlier round is undone (its faces deleted and healed) and both edges rounded together, the same body as picking both at once; another radius says what to do instead of 'the faces at the edge ends must be planar'
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruck and Claude Opus 5.5
d7f9f0a516
Shell of rounded parts (the first tutorial): a round thinner than the shell collapses to a sharp inner edge (as in Fusion) instead of failing; when an open face's tangent round can't follow it out, every face moves in and the opening is the open face's copy swept out through the body; spindle tori (a bottom round running round a rounded corner) are taken by the offset; shells after a drilled hole; engine tests against the analytic volumes (box with rounded vertical edges and bottom loop, the tutorial plate at 2 mm and 1.5 mm)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruck and Claude Opus 5.5
1bf377c14b
No panics in the boolean's final assembly (the web build aborts on any panic: the Plastic Enclosure sample panicked 8 times and crashed the browser's start page); face pushes check their result and fall back to the general offset (a boss standing on a plate joins again with off-axis cylinder seams); offset errors name the face they can't move; docs/robustness.md with the before and after rates; caught panics counted per design in the robustness runs
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruck and Claude Opus 5.5
ccde7a4837
Robustness runs and the kernel fixes they found
...
- solvecraft-cli fuzz / fuzz-one: seeded random modelling sessions (boxes, extruded profiles with arcs, revolves; joins and cuts of boxes, cylinders and spheres, fillets, chamfers, shells, holes, patterns) on a grid that makes coincident faces and tangencies common, every step checked (command ok, every body a sound solid via the new Body::validity, volume moving the right way), plus the boolean volume identity on random primitives; one process per seed with a time limit; failures minimised to scripts
- shell/offset: corners where a curved face meets another at an angle are refined onto the moved surfaces (Newton); edges that are neither lines nor arcs are rebuilt through their moved points; one shell per piece; faces that would cross say so (not supported yet) instead of leaving a cavity inside out; flat revolved faces count as planes; the unhealed body is tried when the healed one fails
- cylinders start their seams at an odd angle (grid-aligned seams broke booleans along them)
- partial revolves of profiles touching the axis build no zero-area face on the axis
- booleans on bodies in several pieces retry a piece at a time
- regression tests for each, and a fixed set of seeds in cargo test
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruck and Claude Opus 5.5
5d69452db3
View cube: the axis triad is drawn behind the cube, so only its parts outside the cube show
...
Refs #15
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-09 23:56:55 +00:00
CypherNaugh_0x