- PDFIMPORTIMAGEPATH names the image extraction folder: relative to the
PDF's folder (default "PDF Images"), absolute as given, "." for none.
- Every import of the session gets the next prefix (PDF_, PDF2_, PDF3_ ...),
also when the same file is imported again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Unlayered raster images go with the PDF layer drawn last before them.
- Circular Bezier arcs import as arcs: bulged polyline segments with Join,
ARC entities without it; straight chains still join.
- Imported PNGs go to "PDF Images" next to the PDF; import blocks are
numbered imp31, imp32, ...
- Background darkness is its HSL lightness below one half.
- All chosen pages attach at the same insertion point.
- PDF geometry snaps as separate pieces: centre from the rim, intersections
and perpendiculars.
- Automation: snap query with an optional base point.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The command driver was split into command_driver/ upstream; the PDF
underlay and XCLIP additions to the old file move with it: their
CmdResult arms into the router (mod.rs) and the block-reference
selection filter with its clip lookup into utilities.rs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Publishes app-free domain logic for shared use: match_special_props and PolylineMatchStyle move to entities::match_props; xdict trio usable headlessly; new match_layer, copy_to_clipboard, paste_entities and match_properties kernels over CadDocument. Handlers stay thin shells keeping undo, dirty flags, selection and command-line echo.
Adds cross-document copy, paste and property-match tests plus a headless proof driving copy, paste and match with no app instance.
- `XREF <args>` runs whole: probing the bare verb first now opens the
External References palette, which refreshed every entry and toggled
the palette before `XREF Reload A` / `XREF ?` ran.
- Update the two tests that encoded the old behaviour: `-XREF ?` prints
the reference table, and attaching a missing file is rejected.
- Drop the duplicate "Specify On-screen" catalog entry that shadowed the
translated common key, with its unused ftl keys.
- Move `remove_pipe_symbols`' doc comment back above its function.
- Note in `document_for_save` that resolved xref content stays out.
- Gate the desktop-only preview cap and tab index for wasm.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The reference follows the cursor while its insertion point, scale or
rotation is asked (preview-only PScale/PX/PY/PZ/PRotate included); a
relative path chosen before the drawing had a file becomes relative on the
first save, and relative paths start from "./" at or below the drawing's
folder; -XREF name options report "No matching xref names found.".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Attach External Reference dialog after XATTACH / ATTACH; ATTACH routes
drawings, PDFs and images; placement prompts and messages follow the
reference (presets, Corner/XYZ, nonzero check, existing definition reuse,
missing file, self-reference); name keeps the file's case; overlay and
path type at attach; one undo step for definition and INSERT; -XREF option
prompt and `?` table; XREF opens the palette; ER alias; xref Properties
rows; dependent symbols flagged and remapped and resolved content left out
of the saved file; dialog_ok automation action; localized labels.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The 2Lines placement (#1459) wrote the second line's new ends back with
`set_resolved_point`, which was not the inverse of the `resolve_point` it
paired with. `resolve_point` reads polyline vertices in WCS through the
polyline's OCS; the writer put that world point straight into the OCS
vertex, so a mirrored polyline (normal -Z, common in real drawings) had
its vertex flipped, and the closing segment's end marker — which names
vertex 0 on a closed polyline — found no vertex and the placement was
silently dropped. The writer now converts back into the OCS, keeps the
polyline's own elevation, and wraps the closing marker the same way.
The same arm pushed `test_pline_line_then_arc` past the default test
thread's stack: its locals, a cloned entity among them, sat in the frame
of the command-result dispatcher, which is on the stack of every click.
The placement is built out of line and handed over boxed.
Merging #1447 had left nothing setting DIMCONSTRAINT's default to
Diameter; the Dispatch arm #1461 turned into a match now covers it with
Radius and Convert. DCCONVERT's result lines go through the translation
macros.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The command deleted the dimension and left a literal constraint behind. The
reference keeps the dimension, drives it with a new parameter and gathers
only associative dimensions, saying how many objects it dropped.
Co-Authored-By: Claude Opus 5 <[email protected]>
The bundled `opencad.python` plugin drives OCS through plugin API v7: all
43 canvas entity kinds, the drawing tables, and OCS's own commands run
step by step. RustPython stays in the plugin process — the plugin crate is
outside the workspace with its own lock file, so the application's own
dependencies are unchanged.
Reconciled with the plugin command work that landed as #1425, which the
branch was written before:
- Both added `impl Drop for PluginProcessInteractiveAdapter`, which git
merges silently into two impls that do not compile. One body now
cancels the command and then drops it from the runner, in that order: a
plugin waiting on a step has to be released before the runner forgets
the command.
- `execute_command` (#1425) and `run_command` (#1423) are both routes from
a script to the command line, and only the second was guarded. The
SCRIPTCOMMANDS switch and the denylist are shared now, so neither route
is the unguarded one.
- `run_command` dispatched with plugin dispatch still enabled, so a script
naming a plugin command re-entered the plugin that was blocked waiting
for it. It sets the suppression flag for the length of the dispatch, as
`execute_command` does.
The denylist read the command as typed, while the dispatcher resolves
aliases: a user-defined `Q` for `QUIT` (ALIASEDIT writes those) walked
past it. It resolves the alias first.
Also: the active-command comparison ran on every message, a mouse move
included, allocating two strings for names that are already `&'static
str`; SCRIPTCOMMANDS' own messages go through the translation macros; and
`docs/.DS_Store` (now ignored) and an unrelated RTF note about constraint
commands are out of the tree.
Co-Authored-By: Claude Opus 5 <[email protected]>
Implement the complete Block Definition dialog window launched via BLOCK
and BMAKE commands, featuring standard CAD layout, workflows, and entity
creation pipelines.
- Dialog UI & Layout:
- 2-column compact CAD grid with synchronized vertical heights (580 × 390px).
- Editable combobox with existing block names, invalid character validation,
and inline redefinition badge.
- Multi-line text editor widget for block descriptions (replacing single-line input).
- Quick Select (QSELECT) button integration restoring dialog state upon completion.
- Confirmation guard when attempting to redefine an existing block definition.
- Centered radio buttons, clean coordinate inputs, and accessible keyboard shortcuts.
- Base Point & On-Screen Workflow:
- BlockOnScreenCommand strictly enforces prompt sequencing: Base point is
prompted before object selection.
- Dynamically recalculates world_to_block and block_to_world affine transforms
when base point is specified on-screen, preventing stale (0,0,0) normalization.
- Supports Retain, Convert to block (INSERT placement), and Delete modes.
- Explode Enforcement:
- Guarded EXPLODE command to prevent decomposing blocks flagged as non-explodable.
- Dynamic Themed Icons:
- Added pick_point.svg, select_objects.svg, quick_select.svg, and warning_triangle.svg.
- Routed all icons through the semantic theming engine so line work (#B4B6B9)
and accents (#6DB7ED) adapt automatically to the active theme.
- Tests:
- Added unit tests for retain/convert/delete modes, redefinition, explodable flag,
on-screen base point transform recalculation, and command sequencing.
#1447 branched from the same commit as #1443 and rewrote the radial
dimensional constraint a second time, so the two designs had to be
reconciled rather than stacked. #1447's is the one kept: it covers
DCRADIUS and DCDIAMETER through one command, places the dimension by the
direction the location was picked in rather than storing a text point,
and names the parameters `radN` / `diaN`. #1443's radial command result,
its entity builder call and its follow-up code are gone; its own
independent work stays — the ribbon's small-button grid and tool
descriptions, the magnitude reading of a negative radius, and the centre
anchor a parameter edit resizes a circle about.
The DIMCONSTRAINT default follows #1443: running DCRADIUS or DCDIAMETER
directly leaves it alone, and the Dispatch arm sets it when DIMCONSTRAINT
is what asked for the command.
The second commit's radial drawing — the dimension line broken around the
text, the elbowed leader, the centre-mark and arrowhead rules — applied to
every radius and diameter dimension, not just a constraint's, and three
layout-parity tests said the old layout was the measured one. It is now
scoped to a dimensional constraint's own dimension, as #1443 scoped its
version, and ordinary radial dimensions draw as they did.
Co-Authored-By: Claude Opus 5 <[email protected]>
The commands ask for the circle or arc themselves, report the measured
size, take a dimension line location and then the value or name and
value, creating a radius or diameter dimension as the constraint's
dynamic dimension with a radN/diaN parameter, refusing a second radial
constraint on the same object and any non-positive value.
Co-Authored-By: Claude Opus 5 <[email protected]>
`bool::then_some` evaluates its argument eagerly, so starting SHELL or
SOLIDEDIT with nothing selected indexed an empty vector and aborted the
application. The single-solid target now comes from a slice match.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Direct distance entry (#1429) turned every bare number at a point prompt
into a distance, so ROTATE's angle and the values automation types were
read as coordinates. The step reads the token first now — `feed_command`
reports whether it claimed it — and only an unclaimed one becomes a
distance. That also puts the token back on the unified step driver, which
owns the P / L selection keywords and the dimension-snap bookkeeping, and
stops `on_text_input` running twice for the same token. A tracking ray
carries its own base, so it no longer demands an anchor that the first
point of a command does not have yet.
Plugin command execution (#1425) re-implemented the command line inside
the plugin host: it dispatched families directly, skipping the teardown
that starts a command (grip edits, selection gestures, `last_point`, the
accepted snaps), and made every `CmdResult::Dispatch` in the application
skip plugin dispatch to avoid its own re-entrancy. A scripted line now
runs through `run_command_line`, with the trailing Enter left off while
the plugin streams the command, and the re-entrancy is handled by a flag
set for the length of the plugin's call. A pause parks the line's Enter
with the rest of its tokens instead of dropping it.
A font reference (#1432) tried the family lookup before the face-file
index, and that lookup ends in a prefix match a longer file name loses to
(`ISOCPEUI.TTF` would take `ISOCP`). The exact file answers first.
Co-Authored-By: Claude Opus 5 <[email protected]>
Select arc or circle / Dimension text / dimension line location / value or
name prompts with a radN parameter, invalid-selection, miss, duplicate and
invalid-expression messages, negative values as magnitudes, a dynamic radial
dimension on the constraints layer drawn as the reference does (mid-radius
text on the center-to-rim line, no hook, no center mark, one text grip), the
stored text position following the radius, center-anchored resizing, the
Properties title and Constraint section, DIMCONSTRAINT's Radius default,
the small-button Dimensional ribbon grid and tooltip descriptions.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Reads and sets the form new dimensional constraints take (0 dynamic,
1 annotational), the same state DCFORM sets.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
DCANGULAR picks two lines, an arc or three points, takes the dimension
line location to choose the sector and the value or name, and creates the
dynamic two-line or three-point angular dimension driven by an angN
parameter. Reference messages for invalid, repeated and parallel sides,
existing names and invalid names; angle values display within one turn at
the angular precision; the first side (or vertex and first point) stays
when the value changes; the ribbon Dimensional panel follows the reference
order.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Placements (entity lookups, intersections, String labels, projections)
recomputed per view() and per mouse-move hit-test, with overlay re-clones
and 2-3x offset recomputes. New constraints_epoch bumped on every set
mutation/visibility/undo/DWG-load (plus new set_constraint_enabled API);
single-slot Arc<[GlyphEntry]> memo on an 11-field key (hover/selection
excluded); overlay de-cloned/de-duped to the single geometry source;
hit paths reuse the cache.
Tests:
- cached_glyph_placements_hit_returns_same_arc: same-key Arc identity
- cached_glyph_placements_invalidated_by_metadata_edit: edit + selection change yield new Arc
- glyph_hit_test_entries_matches_precomputed_boxes: shared hit-test helper
Bench (cargo bench glyph, 60 constraints): 8.18us -> 0.05-0.15us (~55x).
A/B reference deleted.
A saved user preference (on by default) toggled by the SCRIPTCOMMANDS command
gates HostApi::run_command; Cancel stays allowed so a waiting command is never
stranded. The runner refuses the SCRIPTCOMMANDS command itself, so a script
cannot change it. Documents why no helper-thread or stack-growing dependency was
added: native builds link with at least 8 MiB, the nesting depth is fixed, and the
deepest step found needs 2 to 4 MiB in a debug build.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
DCFORM sets the annotational or dynamic form and continues into the
DIMCONSTRAINT option prompt, whose wording and last-used default match the
reference. -PARAMETERS manages parameters from the command line; a
double-clicked constraint dimension opens its value prompt. Dynamic
dimensions rescale on every camera change and their display overrides stay
out of the saved file. A driving dimension between an entity's own ends no
longer has its length retained, so a new value moves the second point along
the dimension axis; parameter edits hold the first constraint point.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
The dynamic dimension of a dimensional constraint is now linked in the
drawing file (AcDbAssocDependency + AcDbAssocDimDependencyBody on the
constraint node), reread on load, hidden by DCHIDE/DYNCONSTRAINTDISPLAY
and never plotted; it carries a lock mark before its text. New
CONSTRAINTNAMEFORMAT and DYNCONSTRAINTDISPLAY variables and the
DIMCONSTRAINT option front end. A transformed entity whose own end points
a driving dimension measures keeps only the first constraint point, so a
scaled line returns to its dimension value.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
DCLINEAR, DCHORIZONTAL, DCVERTICAL and DCALIGNED follow the reference flow:
`Specify first constraint point or [Object] <Object>:`, `Specify second
constraint point:`, `Specify dimension line location:`, then `Dimension
text = …` and `Enter value or name and value <d1=100>:`. Linear reads
horizontal or vertical from the dimension line location the way a linear
dimension does; Object takes a line's, an arc's or a polyline segment's
ends. A miss reports `No valid constraint point found.` / `No object
found.` and asks again; another object type reports `Invalid selection for
Linear. Select a line, polyline segment or arc.`.
Each constraint creates a drawing parameter (`d1`, `d2`, …, or the typed
`name=expression`), drives the constraint through it, and draws a dynamic
dimension in constraint gray whose text follows CONSTRAINTNAMEFORMAT
(`d1=100.0000`); the dimension is associated with the constrained objects
and its text is refreshed after every solve. A typed value other than the
measured one moves the second point while the first stays, and so does a
later parameter edit. Deleting the constraint removes its dimension and,
when nothing else reads it, its parameter.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Equal was applied through a generic gather-then-apply flow and, with the
default size-retaining solve mode, never changed anything: the solver
held both sizes and the relation could not be met. Now:
- GCEQUAL joins ECONSTRAINT and GEOMCONSTRAINT Equal; both objects are
picked inside the command (`Select first object or [Multiple]:`,
`Select second object:`; Multiple gathers `Select objects to make equal
to the first:`), a selection made beforehand is not used, a miss says
`No object found.` and re-asks, an unsupported object or the same object
twice is reported and re-asked, a repeat is refused.
- The follower is resized in place before the relation is added: a line or
straight polyline segment keeps its start and direction and its end
moves to the first object's length; a circle or arc keeps its center and
takes the radius.
- During edits the side that is not being edited follows the same rule:
its size is not retained, its start (or center) and other vertices are
held and its direction kept, so only its length or radius changes; a
chain of Equal relations follows along.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
