Every docked panel now shows its title bar flush along the top, like the
Properties panel: dock::frame takes the title bar separately and pads
only the content below it.
A floating panel drops its horizontal title bar for a vertical one on
the side facing the nearer workspace edge. Close and the auto-hide pin
sit at the top; the panel's icon sits at the bottom with the title
reading upward above it. The free part of the bar drags the panel. With
auto-hide on, a floating panel shrinks to its title bar until hovered.
Panel views take a dock::Chrome (auto-collapse plus floating) in place
of the bare auto-collapse flag, so the shared title bar knows when to
step aside.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Panels can now float over the workspace, share a docked slot as tabs,
and split an edge at heights the user picks.
- Dropping a panel away from the edges floats it at the pointer. Floating
panels move by their title bar, resize from a corner grip, and come to
the front when clicked.
- Dropping in the top or bottom quarter of a docked slot docks the panel
above or below it, as before. Dropping in the middle adds the panel as
a tab of that slot. Pressing a tab shows that panel; dragging a tab
pulls the panel out again.
- While dragging, a blue ghost previews the result: the new slot, the
slot with its future tab row, or the floating window.
- A splitter between stacked slots sets their heights; double-click it
to make the slots equal again. Heights persist.
- A press only becomes a drag after 5 px of movement, so clicking a title
bar or tab never moves the panel.
The persisted layout now stores each edge as tab groups with a height
weight, plus a list of floating panels. Configs with the old
bare-panel-id stacks still load as single-panel slots.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
grips lists the selection's grips; grip_drag moves one to a world point
through the viewport's own grip gesture with snaps, ortho and polar off;
click presses the left button where a world point shows, optionally with
Ctrl and/or Shift held.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The no-selection panel showed only the AC code. It now reads e.g.
"AC1032 (2018+)", from the version the file was opened as.
Discussion #1442
Co-Authored-By: Claude Opus 5.5 <[email protected]>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DsSetHandle for the first arrowhead also overwrote the second, destroying split-arrowhead configurations. The second write was a drive-by from overhaul 25515fa3; the Dimsah toggle has its own null-guarded init. Test: dimblk1_pick_leaves_dimblk2_alone pins per-end independence (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
It stamps sheet set data, which the web build does not have; the wasm
check failed once #1627 split it out of prepare_native_save.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sweep history records in the reference layout.
Pins resolved to upstream: codec bff95f5 (#93, #94, #95, #96, #97 and
review fixes), kernel 6146d31 (#75 and review fixes), graph 9635ba7.
- UPDATEFIELD stays the command main already had (Select objects, undo,
locale strings); it now takes the PR's reach — a block reference's
attributes and block definition, a table's cell texts — and reports
the fields that really changed. The PR's second implementation and its
duplicate registration are gone.
- FIELDEVAL's range error goes through the locale catalog.
- Field boxes: no slicing inside a character, one layout per multi-line
attribute, and TEXT boxes scale about the annotative reference point
like the glyphs do. Comment and indentation put back where they belong.
- bump_text_hosts classifies every host in one pass over the drawing
instead of scanning all layouts and blocks per host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A point or pick step commits on the press, so the cursor drifting before
the button comes up no longer moves it. Selection steps and drag-fence
picks still wait for the release.
The press runs the existing release path once; the command path clears
left_down, so the real release that follows does nothing. This replaces
the PR's moved click block and press_consumed_point flag, which could
stay set when the release landed outside the viewport and swallow the
next release, and which broke TRIM's press-and-drag fence.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A blank script line outside a command repeats the last command through
dispatch_command, as the command line's empty Enter does.
- ZOOMFACTOR bound docs describe the SETVAR range the PR widened, and the
test keeps checking the value the Options field reaches.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Dynamic-input fields take ' and " and read 2'9" / 3' as lengths (#937)
- STRETCH on a selection made by a crossing window stretches through that
window and goes straight to the base point (#1068)
- STRETCH's crossing-window steps show no coordinate boxes (#657)
- Collapsed ribbon panel titles wrap at words, never mid-word (#920)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
New sweep records store the source and placed profile frames, the
default mitred joint, groups 292-294 and a 3D polyline path as a wire
body, so the reference re-evaluates them. Builds against the sweep
history codec and kernel revisions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brings codec PRs #84 (cross-version visual styles, table styles,
subentity managers), #88 (viewport clipping flag, DXF boundary handle),
#89 (DXF viewport snap/twist in degrees) and #92 (field format codes,
event updates).
With #88 a viewport keeps a stored boundary whether or not clipping is
on, so a linked boundary alone no longer means "clipped": rendering,
paper picking, VPCLIP and the Clipped property check the clipping flag
too, and VPCLIP / MVIEW Object and Polygon set it. Before, OCS never set
the flag, so its clipped viewports opened rectangular elsewhere.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Table cell fields show their stored value; only formula cells evaluate
live. UPDATEFIELD on a block reference also updates the fields of its
block definition, and on a table the fields of its cells; a changed
table cell text redraws the table. The FIELDDISPLAY box is placed from
the text layout (MTEXT layout cells, TEXT / attribute pen advances) and
spans 0.345 text heights below the baseline to 1.19 above it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
MTEXT draws its stored text instead of re-evaluating fields on every
redraw. Fields update on their evaluation events as the reference does:
open (1), save (2, not autosave), plot (4) and REGEN/REGENALL (16), each
masked with the drawing's FIELDEVAL (variable dictionary, 0-31, with the
reference's prompt and message), and the new UPDATEFIELD command
(selection, attributes of selected block references, "N field(s)
found." / "N field(s) updated."). A Date field (on demand only) keeps
its value until UPDATEFIELD. The FIELDDISPLAY gray box now covers each
field's own glyphs, one box per line it spans, instead of the whole
text. Codec moved to the update_fields / field_spans revision.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A plot stamps PlotDate fields, but the redraw only dropped the host's
own tessellation: an attribute is drawn by its INSERT and a host inside
a block definition by every reference to the block, so both still
showed the old value on screen and in the plotted output. The changed
hosts now redraw through their INSERT / the block's references (block
cache refreshed), without re-tessellating anything else. The codec is
patched to the field format code fixes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- SSM* / SS* sysvar messages and the Place on Sheet prompt go through
t!/tf!, reusing the existing catalog entries where they exist; one new
key (integer range) is translated in all 21 locales.
- The SETVAR prefix is matched case-insensitively.
- The stale "SHEETSET ... not yet implemented" key is removed from the
catalog and every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Restore the web no-op of `sync_drawing_locks` and keep
`stamp_sheet_set_data` (called only by the native save) out of the web
build.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Invalid Area "Undo" reverts the step that lost the boundary (redo after
an undo, undo otherwise), checks the boundary is back and otherwise puts
the step back and continues without the area; no auto-undo loop.
- COUNTCLOSE / area replacement remove the count polyline outside the
history instead of as an undo step of their own.
- UPDATEFIELD re-evaluates the field texts of a table's *T block and
reports the number actually updated.
- Zoom to a counted object goes through the f64 handle_zoom_to_window.
- Palette: SVG icons instead of glyph text, list cache keyed by tab id,
cached result borrowed instead of cloned, "Count" as the source text.
- Command-line messages go through t!/tf! with entries in all locales.
- Cleanups: \n escapes, area comment, unused parameter, comment order.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- refresh_table_block no longer runs for every table change: only tables
whose picture reference this app dropped while editing them (and new
tables without one), never on appearance-only bumps. Moved, restyled or
freshly opened tables keep their authored *T block. TABLE edits now drop
the picture reference like the other table edit paths.
- set_count_display recolours just the handles whose count class changed
(restyle path + recolor_meshes_for_handles); only entering or leaving
count mode rebuilds the whole drawing.
- Count colouring keeps insert instancing: counted and duplicate wires get
their own instance groups instead of dropping render_instance.
- The hatch backdrop takes the count colour too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude