WBLOCK, SAVEALL, and web ARCHIVE now serialize through the Web Worker
like SAVE/AUTOSAVE: prepare on the main thread, writer pass on the
worker, inline fallback on any worker failure. SAVEALL clears each
tab's dirty flag under the same unchanged-tab race guard the single
save uses; ARCHIVE assembles the ZIP in the completion handler so the
transmittal matches the snapshot taken at command time.
The review of the previous fix commit found the collision refusal
still REPLACED the registry bytes — the exact silent retargeting it
was meant to prevent. The refusal now keeps the old registration, the
extraction settings picker reports refused picks in the wizard's error
slot (previously silent, and the stale collision flag could surface as
a wrong-file warning on an unrelated browse), and the xref registry's
same-name ambiguity is documented as a browser fundamental (native
distinguishes by folder): newest registration wins consistently for
resolution, ARCHIVE, and XRELOAD — matching what the drawing displays.
Also: the Quit pending-close survives a successful web tab-save
(continue the quit instead of dropping it), the last ZIP64 sentinel
(central size) is rejected like the other four, and the new behaviors
gained regression tests (collision keeps old bytes, registry eviction,
including the deadlock fix for the guard-scoping that test exposed).
(cherry picked from commit b635d56c)
Ported onto main (#1717 review): ARCHIVE and SAVEALL serialize
document_for_save() like a single web Save; the ZIP is built with the
zip crate; WBLOCK keeps its native background-task title.
Full verification of the XREF/data/ARCHIVE/worker wave (three
reviewers, one forensic) found no blockers and no crossfire damage;
five majors and several minors are fixed here.
- ARCHIVE now packages XREFs: the bytes registry added by the same
commit is consulted (the in-code 'no xref store exists' comment was
false within the commit), and the drawing is packaged only after
the full save preparation — without it kernel solids shipped
without their ACIS data.
- PendingClose stores the stable tab id instead of a vector index:
the web save now completes asynchronously, and closing a lower tab
during the serialization window shifted indices — closing the WRONG
tab, or panicking on a stale one. All producers and consumers
resolve the id at use.
- The xref bytes registry is capped (6 entries, oldest evicted): every
open, drop, and pick registered full drawing bytes with no bound —
an OOM waiting to happen. Reopened recents register too, so any
entry path can serve as another drawing's xref.
- A re-picked data-link source with the same name but different bytes
no longer silently replaces the first (the browser hands back bare
names, so two same-named files collided and every reference read
the newer pick): the pick is refused and the user is told why.
- The unresolved-xref warning lists file names (what to drop on the
page), not internal block names; the ZIP writer refused the ZIP64
sentinel values (0xFFFF counts, 0xFFFFFFFF sizes/offsets) instead
of emitting archives that send strict readers hunting for a ZIP64
EOCD that is absent; docs note the worker-side saves.
Known follow-ups documented, not fixed here: the serde-skipped
ExtendedEntity/CadDocument raw bytes still drop on worker crossings
(needs codec accessors — upstream), and WBLOCK/SAVEALL/ARCHIVE
still serialize inline (the worker route is a small follow-up).
(cherry picked from commit 6f429f24)
Ported onto main (#1717 review): main already keys PendingClose by tab
id, so those hunks stay as on main; the ZIP64 guard is moot with the zip
crate; the unresolved-xref names split on both path separators, since
Path does not split Windows paths in the browser build.
The last four big web-vs-desktop gaps.
XREFs: XATTACH reads the picked drawing's bytes and registers them
name-keyed (the image/PDF-underlay pattern), pre-parses on the web
worker, and the commit merge produces the same xref block flow as
native. Opened drawings resolve xrefs from the registry (trailing-name
match) before cache build; unresolved references produce ONE warning
listing the names and the fix — drop the referenced files on the page
(drops and picker opens now register their bytes) and reopen or
XRELOAD. XRELOAD works off the registry on unsaved drawings too.
Data Link & Extraction: spreadsheet links read picked xlsx/csv bytes
(calamine from slices / CSV from string) through a session registry,
so preview, refresh, and table-insert work on web; extraction takes
external drawings via a multi-file picker parsed on the worker, and
outputs CSV/TXT/.dxex via download_bytes. The disabled 'Add folder'
button explains why.
ARCHIVE/ETRANSMIT: assembles the drawing plus registered images, PDF
underlays, and session plot tables into a ZIP delivered as
{stem}_transmit.zip; skipped dependencies are reported by name.
Save/autosave off the UI thread: the parse worker gains a serialize
action (protocol v5) — the document is prepared once on the main
thread (clone, styles, dimension bake), then the DWG/DXF writer pass,
the dominant cost, runs on the worker; any worker failure falls back
to inline serialization with the identical shared implementation.
The save path also clears the dirty flag only when the tab didn't
change mid-write, and the runtime-fields sidecar now carries
graphic_data, fixing a pre-existing loss of raw DWG round-trip bytes
on web-opened documents.
(cherry picked from commit 2e100634)
Ported onto main (#1717 review): the new ocs_save crate builds on the
pinned codec; the hand-written ZIP writer is replaced by the zip crate
already in the tree; ARCHIVE packs registered xref bytes too and
serializes document_for_save() like a web Save; the web save prepares
document_for_save() (prepare_document_for_save now takes the copy by
value, so no second clone); the wasm resolve_path consults the xref
registry, so every reference lookup — not just resolve — finds dropped
files; XRELOAD keeps main's undo, unload and stale-baseline handling;
native data extraction streams the source drawings one at a time.
A fresh web-vs-desktop audit found the remaining gaps; this closes the
top ten.
Raster images: IMAGE attach read the picked file via image::open on a
name-only path (dead on wasm), and raster references inside opened
drawings decoded the same way. Picked bytes are now registered in a
name-keyed store (the PDF-underlay pattern), decoding runs from memory,
and dropped .png/.jpg/.bmp/.tif files register by name so unresolved
references in opened drawings re-resolve and render (and export to PDF).
Command gaps fixed with the bytes-at-pick / download_bytes pattern:
- WBLOCK now downloads the extracted block instead of failing on fs.
- SAVEALL saves every dirty tab instead of printing a no-op message.
- SCRIPT picks and reads the .scr file through the browser picker.
- CENTERLTYPEFILE picks the .lin/.dnl file and populates from text.
- Custom .ctb tables picked on web now parse, register for the
session, appear in the plot dialog list, and apply (load_named
previously returned builtin-only on wasm).
- LAYTRANS 'Load standards file' parses the picked drawing on the
existing web worker.
- INSERT 'from file' in the block palette parses picked bytes and
feeds the shared import path.
Text fidelity: TTF-named styles rendered as thin stroke glyphs on web
because the font database was empty. Fetched Noto faces are now
registered into it with a family alias table (Arial, Times New Roman,
Cambria, ... -> Noto Sans/Serif), so those styles render filled, shape,
export to PDF as vector fills, and appear in the style picker.
ViewCube labels request semibold again on web.
docs/native-vs-web.md: the hatch and font rows were stale (both work on
web now), the GPU row claimed WebGPU is used where available (the
backend is pinned to OpenGL), and the parallelism row missed the parse
worker — all corrected.
(cherry picked from commit c643a10e)
Ported onto main (#1717 review): conflicts resolved toward main — the
font-file lookup, PDF searchable text, purge service, block palette and
plot-style copy stay as they are on main; the web pieces (font registry
and aliases, session plot styles, SCRIPT/SAVEALL/CENTERLTYPEFILE picks,
block-from-file on the web) are layered on top.
new src/scene/block_service.rs (references, delete, rename, purge candidates, name validation, one error type and message). The command-line RENAME, palette Remove, plugin API, control/MCP block_delete and PURGE all use it. Layout, xref, dynamic-block, anonymous and open-in-editor records are protected; PURGE removes an anonymous block only when nothing references it. PROTOCOL CHANGE: control/MCP block_delete refuses a referenced block unless force=true (erases referencing INSERTs in one undo step). New REST route DELETE /api/v1/blocks/{name}?force=true. MCP tool digest re-pinned. Undo labels are Delete block X, Rename block X to Y and Purge.
world = insert_point + Rot * Scale * (P - base_point). Attribute placement, EXPLODE, XCLIP storage, REFEDIT's working copy, the UCS reframe of attributes and the dynamic-block visibility grip ignored the base point and were offset by Rot*Scale*base. They now share insert_transform_with_base. Creation stores a ZERO base and redefine resets it; a no-op redefine moves nothing; the Block Definition dialog prefills the base from the definition. XCLIP filters stored by older builds keep their old displacement.
EXPORTSVG left the plot dialog's SVG device on, so a later EXPORTPDF still
offered a .svg file. The SVG save dialog and plot button texts had no
catalog entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolve conflicts from main's rustfmt pass by taking main's versions of
command.rs, style.rs, view/mod.rs, scene/mod.rs, ui/window/mod.rs and
ui/properties.rs and re-applying this branch's Graphic Attributes changes.
Add the Graphic Attributes strings to the new lo-LA catalog.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01E1QnME6WJbD5iGFae1eeCb
Resolved conflicts:
- app/update/mod.rs: keep the dock's dock_open_at_default for the XREF
manager; take main's stable xref row identity (row_index(&id)).
- app/view/mod.rs: keep the edge layout from app::dock; drop main's copy
of the old edge-stack code (main only reformatted it there).
- ui/window/layers.rs: keep main's new visible_indices next to the
branch's view_panel.
Files the branch only reformatted take main's version. Adds the Lao
(lo-LA) translations for the new dock texts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A focused text field reports Status::Captured, so the key dispatch
dropped SPACE and a CUI rebind of SPACE to FINALIZE never ran while the
command line held focus (#1710). Dispatch a captured SPACE as a shortcut
only when SPACE is bound to something other than COMMANDSPACE, so the
default binding still types a space. The closure stays a plain fn, so a
static flag mirrors the binding and is refreshed wherever the bindings
change.
Allow users to temporarily override object snaps during active point prompts by typing at least the first 3 letters of any snap mode (e.g. MID, END, CEN, PER, NON). The override activates for the next point pick only and automatically restores running snaps once consumed or cancelled.
- LAYERS ribbon button runs a command that opens the Layer Manager pallet;
the ribbon no longer keeps it highlighted.
- Layer Manager: search box stays right-aligned, the column header fills
the row, no stray contour lines when the pallet is taller than its rows.
- Auto-hidden edges don't show the shown-group accent bar.
- Auto-hide reveal and hide wait 150 ms of rest, so passing over the
strip doesn't flash groups open.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Fixes:
- Hover state no longer drops when the pointer moves up from one strip
icon, group grip or title bar to the one above: iced handles the
element above first, so the old element's "left" (None) cleared the
hover just set. Leave messages now carry the element and only clear
their own hover.
- The drop preview used the pallets' own widths; it now uses the
group's width, matching where the pallet lands.
- Group indexes from messages (group grab, splitter) are looked up
safely, so a message from before a layout change no longer panics.
- Floating placements read from the config are healed (finite, positive,
at least the minimum size), like the group weights already were.
- The shown group's edge bar is centred in its row: a stack takes its
height from its first layer, and the icon column was shorter than the
row. The "Drag to move group" tooltip is removed.
Simplifications (no behaviour change):
- dock_open_at_default / dock_unpeek replace seven copies of "dock on
the right if unplaced, then reveal" and four of "stop peeking".
- The drop target takes the grab offset as a parameter, so a drag
update stores its state once.
- dock_set_open, ensure_settings, the shown-index bookkeeping after a
group is removed and the on-screen width clamp each lose duplication.
- VBarLabel drops options its single caller never varied.
- The drop preview's landing computation is one helper.
Naming and consistency: pallet names in the + menu, the drag ghost and
the floating title bar go through t!(); StripHit::Tab becomes
StripHit::Join; stale comments updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
No intended behaviour change except the fixes noted below.
- One drag state: a single `DockDrag` (move pallet / group, width,
splitter, floating size, Layer Manager column) replaces nine fields
(dragging, dragging group, resizing, split, float resizing, origin,
target, grab offset, layer column flag) that had to be kept in sync.
- `dock_expanded` becomes `dock_peek` with one meaning: a pallet revealed
although it auto-hides. `dock_reveal(id)` shows a pallet's group and
peeks it; commands that open a pallet now use it, so opening a pallet
also switches its edge to that pallet's group.
- Each group stores its own width (falling back to its widest pallet's
width until first sized), instead of every pallet's width being kept in
sync. Pallet widths now only size floating pallets and new groups.
- One `dock_set_open(id, open)` holds every pallet's open and close path.
- Leftovers removed: the tab-group config format that never reached main,
the multi-tab drag ghost header, the separate icon-hover message.
Fixes:
- Hovering a strip icon reveals an auto-hiding edge again (the icons had
lost the hover message in the option B strip). Covered by a test that
moves the pointer over the icon in the real view.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
rename_style_storage and rename_symbol rewrote entities and table rows but left dimtxsty stale, so the next Apply resolved a NULL handle. The follow now lives in both shared functions; the plugin workaround is removed as redundant. Tests: text_rename_follows_dimtxsty drives the manager path (RED first); pre-existing plugin rename test stays green via the shared path. Full suite: 2015 passed / 0 failed / 25 ignored.
A new drawing carries the visual styles the reference's new drawing has
in its visual style dictionary. -VIEW sEttings Visual style offers them
(2dWireframe as "2D Wireframe") and a saved view starts with the 2D
Wireframe style.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
An orthographic preset sets its orthographic UCS while UCSORTHO is on
(*FRONT*, *RIGHT*, …; TOP returns to the world UCS); presets no longer
flip to the opposite view when repeated. -VIEW runs as its own command:
Window asks for the name and corners, sEttings loops over Background,
Categorize, Layer snapshot, live Section, Ucs and Visual style with the
reference prompts and messages, Save keeps the UCS with the view while
UCSVIEW is on and Restore brings it back. UCSORTHO and UCSVIEW are
profile variables.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Pins: codec 8189f83, kernel a82f17d, graph d3558bb (all manifests and
the python plugin lock).
- MASSPROP reports volume, centroid, inertia, products, radii of
gyration and principal moments of 3D solids and bodies from their
B-rep (exact where analytic, else from a fine mesh).
- OFFSET of ellipses and splines through the kernel's curve offset.
- FILLET between circles, ellipses and splines through the kernel's
curve-curve fillet, trimming arcs and open splines to the tangents.
The kernel bump brings the DWG ACIS audit fixes: slices, booleans and
press/pull on cones, slanted cylinder sections, survey coordinates,
spline walls and touching parts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Panels can now float over the workspace, share a docked slot as tabs,
and split an edge at heights the user picks.
- Dropping a panel away from the edges floats it at the pointer. Floating
panels move by their title bar, resize from a corner grip, and come to
the front when clicked.
- Dropping in the top or bottom quarter of a docked slot docks the panel
above or below it, as before. Dropping in the middle adds the panel as
a tab of that slot. Pressing a tab shows that panel; dragging a tab
pulls the panel out again.
- While dragging, a blue ghost previews the result: the new slot, the
slot with its future tab row, or the floating window.
- A splitter between stacked slots sets their heights; double-click it
to make the slots equal again. Heights persist.
- A press only becomes a drag after 5 px of movement, so clicking a title
bar or tab never moves the panel.
The persisted layout now stores each edge as tab groups with a height
weight, plus a list of floating panels. Configs with the old
bare-panel-id stacks still load as single-panel slots.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
-VIEW asks "Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/
Window]:" and takes the orthographic and isometric presets (TOP, BOTTOM,
FRONT, BACK, LEFT, RIGHT, SWISO, SEISO, NEISO, NWISO, also with a leading
underscore) directly, Orthographic asking for the face with <Top> as the
default. Keyword prompts accept a leading underscore on their keywords.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- refresh_associative_sweeps runs on every edit and scanned the xdata of
every entity; it now returns at once when no associative swept surface
exists (its application is not registered) and looks at surfaces only.
- An arc's end angle was raised by TAU in a loop, which never ends on a
huge angle from a damaged file; the sweep is taken with rem_euclid.
- The sweep DELOBJ test expected surface sweeps to delete their sources,
which #1663 changed on purpose: an associative surface keeps them.
- codec c9ffcac (opencadcodec #103) adds an explicit viewport-off bit: the
viewport on state is read with is_on() and set with turn_on()/turn_off()
everywhere, so a viewport the file marks off shows off and can be turned
back on from Properties.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PURGE repeats until a pass removes nothing. A drawing whose complex
linetypes use shape files carries unnamed STYLE records for them; the
table holds those under keys the empty name does not reach, so every pass
listed them again and removed nothing, and the loop never ended.
- Unnamed and shape-file styles, and styles a complex linetype reaches by
handle, are never listed for purging.
- In-use checks compare names case-insensitively, as the tables do, so a
layer, style or linetype referenced as WALL is not purged as Wall.
- Counts are what the tables actually removed, and a pass that removes
nothing ends the loop.
Fixes#1662
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Swept surfaces made with SURFACEASSOCIATIVITY on keep their profile and
path and are written as a swept-surface action of the drawing's
associative network, reading the profile and path and their scale and
twist expressions. They follow edits of their sources.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Conflicts were additions on both sides, kept together: the Count palette
and Sheet Set toggles next to the Graphic Attributes toggle in the ribbon,
main's new locale groups and catalog entries next to graphic-attributes,
and module declarations. The palette code follows main's crate renames
(acadrust -> codec, cadkernel -> kernel).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <[email protected]>
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
- UPDATEFIELD stays the command main already had (Select objects, undo,
locale strings); it now takes the PR's reach — a block reference's
attributes and block definition, a table's cell texts — and reports
the fields that really changed. The PR's second implementation and its
duplicate registration are gone.
- FIELDEVAL's range error goes through the locale catalog.
- Field boxes: no slicing inside a character, one layout per multi-line
attribute, and TEXT boxes scale about the annotative reference point
like the glyphs do. Comment and indentation put back where they belong.
- bump_text_hosts classifies every host in one pass over the drawing
instead of scanning all layouts and blocks per host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A blank script line outside a command repeats the last command through
dispatch_command, as the command line's empty Enter does.
- ZOOMFACTOR bound docs describe the SETVAR range the PR widened, and the
test keeps checking the value the Options field reaches.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Afonsop