Route every text-bearing entity to an in-place editor instead of the
command line: a plain text box for single-line text (Text, attributes,
dimension override, tolerance) and the rich MText editor for MText /
MultiLeader. A Leader resolves to the entity it annotates.
- TEXT places a plain text box at the click; double-click edits in place.
- DDEDIT and double-click on any text entity open the matching editor.
- MLEADER places the leader then opens the MText editor on its content.
- LEADER follows the classic flow: points, Enter, then a linked empty
MText annotation opens in the editor; the leader's annotation_handle
links the pair so they edit/erase as a unit.
Adds shared field read/write helpers and a begin_text_edit router, plus
CommitAndEditText / CommitManyAndEditText results that commit an entity
and open its editor (commit_entity now returns the new handle).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Type directly into the rendered MText preview: click to position the
caret, insert/delete, Enter for a new line, Space for a literal space,
and arrow keys to move. The caret blinks when idle.
Keep the trailing empty paragraph in the editor so the caret appears on a
fresh line immediately after Enter, before any typing. parse_mtext_paragraphs
split into a _ex variant; layout_mtext skips the blank-edge trim when
emitting glyph boxes.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
MTextType/MTextBackspace/MTextDelete were never emitted — preview typing,
backspace and delete route through the existing CommandAppendChar /
CommandBackspace / DeleteSelected handlers, which call the methods directly.
Removes the dead variants and their arms (fixes a never-constructed warning).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The rendered MText preview is now an editable surface: it shows a text caret,
click to position it between glyphs, and type/Backspace/Delete/Enter to edit.
Left/Right arrows move the caret; drag-selection + toolbar formatting still
work and typing replaces a selection.
Keystrokes are routed by mapping visible-character offsets to byte spans in
the value (raw newlines count as paragraph breaks, matching the layout). While
the preview is open the command line releases its on_input so typed glyphs
reach the preview instead, and the caret starts at the end of the text so
typing works without a click first.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The rendered MText preview is now interactive: drag across glyphs to select
a character range and apply toolbar formatting (bold, italic, underline,
overline, strike, case, alignment) to exactly those characters.
The text layout gains an opt-in pass that emits one world-space box per
visible character carrying its reading-order index; the editor maps those
boxes into the preview frame, hit-tests pointer drags against them, and
highlights the selection. Formatting splices the matching inline codes into
the raw value at the selected byte range (mapped via a code-aware visible-
character scanner). With no preview selection the Edit-box path is unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The editor opens in preview by default and switches body views with a
segmented Edit | Preview control placed between the toolbar and the body
(active tab highlighted). All toolbar properties feed the rendered preview.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
MTEXT (and double-clicking an MText) now opens an in-place editor anchored
at the insertion point instead of typing a single line on the command line.
The editor has a two-row formatting toolbar: text style / font / height,
bold, italic, underline, overline, strike, upper/lowercase and a colour
dropdown on top; oblique angle, width factor, character spacing, paragraph
alignment, justification, line spacing and OK/Cancel below. Character
toggles wrap the selection in DXF inline codes; global fields apply as
leading runs or entity properties.
Editing is shown in the editor's own area, not on the drawing: a Code/Preview
toggle switches between the raw text input and a rendered preview canvas that
draws the tessellated glyph strokes at real size, scrolling when the text
outgrows the view. The MText box keeps a fixed width so text wraps to the
next line instead of stretching into one line.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- Added SVG icons for text formatting options (bold, italic, underline, overline, strike, uppercase, lowercase).
- Introduced a new `MTextEditorState` struct to manage the state of the MText editor.
- Implemented functionality to open the MText editor from the command line and edit existing MText entities.
- Added message handling for various MText editor actions (formatting, height, style, font, justification, alignment, line spacing).
- Created a dedicated preview area for MText rendering within the editor.
- Updated the command structure to support opening the MText editor and handling text input.
- Refactored existing MText command logic to integrate with the new editor.
Single-click picking cleared the selection first (exclusive), so clicking a
second object dropped the first (issue #47). Plain clicks now add to the
selection and Shift+click removes the picked entity; empty-space click and
Esc still clear. Shift state is tracked from keyboard ModifiersChanged
events since mouse click messages carry no modifiers.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DRAWORDER now affects rendering immediately (bump geometry epoch so the
sort cache rebuilds) and front/back anchor to the block's full effective
sort range instead of only existing table entries, so bring-to-front
actually lands on top. The render fallback sorts table-absent entities by
their own handle.
Draw order now applies across entity types, not just within a type. A
per-entity draw-order rank (SortEntitiesTable override or own handle,
ranked per block) is encoded as a small signed clip-z bias in the wire,
hatch, image, and 3DFACE pipelines. The shared LessEqual depth buffer then
orders fills, lines, rasters and 2D solids against each other regardless of
pass order — without touching model coordinates. 3D meshes keep real
geometric depth; wipeouts stay always-on-top.
Adds a Draw Order submenu to the viewport context menu (Bring to Front,
Send to Back, Bring Above/Send Under Object). The above/under items run an
interactive reference-object pick, then reorder the captured selection.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Cross-platform prerequisite for OS-level file associations: the boot
task now consumes `std::env::args_os().nth(1)` as a path and dispatches
`Message::OpenRecent` for it. Flag-style args (starting with `-`) are
ignored, and `OpenRecent` already does the file-existence check, so a
bogus path lands as a clean command-line error instead of a panic.
Linux: the AppImage's desktop entry adds `image/vnd.dwg` alongside the
existing `image/vnd.dxf` MIME type and grows a `%f` placeholder in
`Exec=` so the launcher forwards the picked file path. Once the
AppImage is integrated with the system (xdg-mime / AppImageLauncher),
double-clicking a .dwg / .dxf opens it in Open CAD Studio.
Windows: new `packaging/windows/main.wxs` defines an MSI installer —
per-machine install to `Program Files\Open CAD Studio`, Start Menu
shortcut, `MajorUpgrade` so newer MSIs replace older ones, and a
single ProgID `OpenCADStudio.Drawing` that owns both `.dwg` and
`.dxf` and launches the exe with the file as `argv[1]`. The icon is
pulled from the SVG logo, converted to multi-resolution ICO at build
time with the runner's pre-installed ImageMagick. CI now also runs
`candle` / `light` (WiX Toolset 3, pre-installed on `windows-latest`)
and uploads both the bare `.exe` (portable) and `.msi` (installer)
to the release.
macOS Info.plist already declares the DWG / DXF UTIs; combined with
the argv-handling change above, double-clicking a drawing in Finder
will open it in Open CAD Studio without further packaging changes.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Quick Select used to filter only on Object Type and Layer. The classic
QSELECT model — pick a type, pick one of its properties, compare with a
typed value via a logical operator — is much more general: a Line entity
can now be filtered on Start X, Length, Angle, Delta Y, …, and any
entity on the common Layer / Color / Linetype / Lineweight.
Panel layout: Object type → Property → Operator → Value → Append. The
Property dropdown is type-aware: it always lists the four common
properties; picking a specific Object type appends that type's
`geometry_properties` rows, sampled from the first entity of that type
in the active layout (so `Start X`, `Radius`, `Pattern Angle`, … only
appear when their entity type is selected). Changing the Object type
drops the Property when the new type no longer offers it.
Operators: `= Equals`, `!= Not equal`, `> Greater than`, `< Less than`,
`* Any value`. Eq/Neq do case-insensitive string compare against the
canonical property string (so "ByLayer" matches "bylayer"); Gt/Lt parse
both sides as `f64` and reject anything non-numeric; Any skips the
value test entirely. The Value text field is disabled when no Property
is picked or the operator is Any. Append behaves the same as before.
The new value reader is hand-rolled for the four common properties
(layer name, color formatted as `ByLayer`/`ByBlock`/`<aci>`/`r,g,b`,
linetype name, lineweight formatted as `0.30mm`) and falls back through
`geometry_properties()` for type-specific fields — extracting the
property's value out of the `PropValue` variant so EditText / Choice /
ColorChoice all canonicalise the same way the panel will display them.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Two ways to extend the current selection by entity type + layer:
* `Select Similar` (right-click → Select Similar, or `SELECTSIMILAR` /
`SELSIM`): for every (type, layer) pair in the current selection, add
every entity in the active layout that matches the pair. The seed
selection stays selected; matches already selected are not
double-counted.
* `Quick Select` (right-click → Quick Select…, or `QSELECT` / `QS`):
opens a centred floating panel with Object-type and Layer pick_lists
(populated only with values that actually exist in the active layout)
and an "Append to current selection" checkbox. `(Any)` in either slot
skips that filter. Apply replaces the selection (or extends it with
Append on) and reports the match count on the command line. Cancel,
Esc, and outside-click all dismiss without applying. When opened with
a selection present, the panel pre-fills both filters from the first
selected entity so QSelect doubles as an editable Select Similar.
Scoped to entities owned by the active layout's block-record so a paper
layout's QSELECT never reaches into model-space entities (and vice
versa). Entity-type names live in a single `entity_type_name` helper in
`entities::traits` to keep the UI strings and the filter keys aligned.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
The right-click context menu was being placed via window-relative
coordinates while the cursor position it anchored to was canvas-relative,
so the menu drifted away from the cursor by the size of the surrounding
ribbon / sidebar / status bar.
Move the menu inside `viewport_stack` so its anchor resolves in the same
coordinate space the cursor was captured in. Introduce
`position_canvas_overlay(anchor, panel)` — wraps `panel` in a column+row
of fixed-width spacers and `iced::widget::opaque(panel)` so events on the
menu itself don't fall through to the viewport mouse area underneath.
The multi-functional grip popup is rewritten to use the same helper.
Outside-click dismiss now mirrors the grip popup: `ViewportLeftPress`
checks `selection.context_menu.take()` at the top and returns early
when it was set, so a press that reaches the viewport mouse area
(i.e. outside the opaque panel) closes the menu without running the
rest of the left-click handler. The redundant `context_menu = None`
later in the handler and the now-unused `Message::ViewportContextMenuClose`
are removed.
Two related issues fixed in the same pass:
* The right-drag threshold for orbit was 3 px squared, small enough that
normal hand jitter between a right-button press and release was
promoting a click to a drag and suppressing the menu on release.
Bumped to 8 px squared.
* `Message::ViewportExit` was clearing `context_menu`. With the menu now
living above the viewport mouse area, the opaque panel capturing the
cursor fires the underlying area's exit handler — which closed the
menu the instant it opened. Stop clearing the menu there; outside-click
dismiss is enough.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Lengthen / Radius / Arc Length need a number after the pick. Stash
`grip_pending` on the picked action, push prompt to command line,
route next `CommandSubmit` parse into `apply_grip_menu_value`.
Escape cancels.
- `Grippable::grip_menu_value_prompt` returns label when action
wants value; `apply_grip_menu_value` runs the edit. Dispatched
via `EntityTypeOps`.
- Line: Lengthen extends either endpoint along line direction.
- Arc: Radius sets radius; Arc Length redrives end angle from
`value / radius`; Lengthen extends start / end angle the same
way.
Dwell timing only advanced when `ViewportMove` fired; a perfectly
still cursor never triggered the popup. Subscribe to animation
frames while `grip_hover` is set and dispatch `GripDwellTick` from
them so `update_grip_hover` re-checks the elapsed dwell each frame.
Subscription auto-stops as soon as the hover clears or the popup
opens.
Phase 2 of the grip overhaul: when the cursor dwells on a selected
entity's grip the overlay opens a popup menu with entity-specific
options (Stretch / Add Vertex / Remove Vertex / Convert to
Arc-Line / …). Picking an item dispatches `apply_grip_menu`; the
default `Stretch` entry is a no-op that lets the user click the
grip to start the normal drag.
- `GripMenuItem` + `GripMenuAction` (full vocabulary covering
stretch, add/remove vertex, convert to arc/line, reverse arrows,
text-position variants, hatch parameters, tangent direction).
- `Grippable` trait gains `grip_menu` + `apply_grip_menu` with
trait-default `Stretch`-only impls so every existing entity gets
the popup for free.
- `EntityTypeOps` dispatches both methods across the same entity
list as the existing grip / property machinery.
- `OpenCADStudio` carries `grip_hover` (dwell tracker) +
`grip_popup` (open menu). `update_grip_hover` runs from
`ViewportMove`: hit-tests grips, refreshes the dwell timer, and
opens the popup after 600 ms. Cursor drift past 80 px or a grip
click dismisses it.
- `view.rs` paints the popup as an absolute-positioned column of
buttons at the grip's screen anchor; each button publishes
`Message::GripMenuPick(idx)`.
- `LwPolyline` overrides `Grippable` manually (skips the standard
macro) so its vertex grip exposes Add/Remove Vertex and its
segment-midpoint grip exposes Add Vertex + Convert to Arc/Line.
`apply_grip_menu` performs the edits: vertex insertion at the
chord midpoint inheriting the previous bulge, vertex removal,
and bulge toggle for the arc/line conversion.
`sync_dyn_fields` only ran during `ViewportMove`, so a typed-coord
or click-driven point commit left the previous iteration's field
shape in place until the user nudged the mouse. After the first
LINE click that meant the stale `[X, Y]` (built when there was no
base) kept serving the next point's input as cartesian even though
the command-default for a "Point with base" is now polar
`[Distance, Angle]`. The original #35 fix preserved a
`,`-reshaped cartesian set on purpose, but the same machinery now
also held onto a never-explicitly-chosen `[X, Y]` carried over from
"no base" → "has base".
Track that intent explicitly with `dyn_user_reshaped` (set in
`dyn_comma_advance`, cleared on point commit and command start)
and only treat a non-matching shape as acceptable while that flag
is on. Re-run `sync_dyn_fields` from every point-commit path
(command-line typed coord, mouse click, dynamic-input locked
commit) so the freshly updated `has_base` state immediately picks
the right default and the user sees polar fields without having
to move the mouse first.
Tiled Model layouts now show the inner edges between panes as 2-px
dividers that act as resize grips: cursor on a divider → resize cue,
press + drag moves the edge (with every tile sharing that edge
updating together), release runs a collapse pass that absorbs any
tile that fell below the viewcube-comfort minimum into the neighbour
with the longest shared contact edge — drag a divider all the way
across to remove a pane.
- Scene grows `model_tile_edges`, `hit_model_tile_edge`,
`move_model_tile_edge`, `collapse_small_model_tiles`. Edges are
derived from the existing `model_tiles` rects (no extra storage).
- App carries a `tile_drag` Option; `ViewportLeftPress` starts it
ahead of tile activation / picking, `ViewportMove` drives the
edge, `ViewportLeftRelease` collapses + clears.
- `SelectionCanvas` draws the dividers and switches the cursor to
`Resizing{Horizontally, Vertically}` over them.
Model space'de VPORTS artık iki aşamalı: bare VPORTS bir yapılandırma
istiyor (SIngle/2H/2V/4), sonraki komut-satırı girdisi düzeni kuruyor
(boş giriş = SINGLE). set_model_tile_layout normalized rect listesiyle
tiled düzeni değiştiriyor:
- SINGLE: tek tam-ekran
- 2H: üst/alt
- 2V: sol/sağ
- 4: 2x2
awaiting_vports app flag'i prompt sonrası girdiyi yakalıyor. Paper-space
VPORTS davranışı değişmedi.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Model layout artık tiled viewport destekliyor. Scene.model_tiles
normalized ekran rect'i + kamera tutan tile listesi; active_viewports
model layout'ta her tile için bir ViewportInstance üretiyor (aktif tile
canlı scene.camera'yı, inaktif tile'lar saklı snapshot'ı kullanıyor).
Render-mode picker'ın yanına iki buton eklendi: ▤ aktif tile'ı yatay
(üst/alt), ▥ dikey (sol/sağ) ikiye böler. split_active_model_tile
bölmeyi yapıyor; her iki yarı aktif kameranın kopyasını alıyor.
set_active_model_tile_at (cursor → aktif tile, kamera swap) ve
reset_model_tiles eklendi ama henüz bağlanmadı — aktif tile cursor
seçimi + pick yönlendirme sonraki adımda.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Sağ kenardaki dikey orbit/pan/zoom/zoom-extents araç çubuğu tümüyle
kaldırıldı: viewport render'ı, overlay::nav_toolbar fonksiyonu,
show_navbar state + ToggleNavbar mesajı/handler'ı, NAVBAR komutu, View
şeridindeki "Navigation Bar" aracı ve navbar modülü/ikonu. Aynı
gezinme işlemleri komutlar (3DORBIT, PAN, ZOOM*) ve ViewCube üzerinden
erişilebilir durumda.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Dinamik giriş artık cursor yanında düzenlenebilir kutular gösteriyor.
TAB ile kutular arası geçilir, bir kutuya yazınca o kutu kilitlenir
(değer sabitlenir), diğerleri cursor'ı takip etmeye devam eder, Enter
ile çözülen nokta komuta point-pick olarak iletilir.
- DocumentTab.dyn_fields / dyn_active state; DynComponent + DynFieldEntry
- sync_dyn_fields komutun dyn_field() + base noktasına göre kutu kümesini
türetir: nokta+base → [d, açı], nokta+base yok → [X, Y], radius → [d],
açı → [açı]
- klavye yönlendirme: rakam/./-/+ aktif kutuya, TAB sonraki kutuya,
Enter try_dyn_commit, Backspace kilidi açar
- dyn_capturing iken command-line text alanı on_input'suz bırakılıyor
ki focus'u ve tuşları çalmasın; girişler global key aboneliğinden
geliyor (numpad dahil text alanı üzerinden yakalanıyor)
- çoklu-kutu overlay render: aktif kutu vurgulu, kilitli kutu farklı
kenar rengi
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Replaces the binary Wireframe/Solid toggle with a 7-mode dropdown
that maps onto acadrust's `ViewportRenderMode` enum: Wireframe 2D /
Wireframe 3D / Hidden Line / Flat Shaded / Gouraud Shaded / Flat
Shaded + Edges / Gouraud Shaded + Edges. Per-tab state lives on
`DocumentTab::render_mode`; the old `SetWireframe` message forwards
to `SetRenderMode` so the ribbon + WIREFRAME / SOLID command line
keep working.
`scene::render::render_mode_flags()` translates the mode into three
pipeline-facing booleans (`face3d_fill`, `mesh_fill`,
`show_3d_edges`); `mesh_fill` / `show_3d_edges` are stubs that the
upcoming phases will consume. `Primitive` carries the derived
`view_wireframe` plus the two new fields through to `prepare()`.
`Pipeline::upload_face3d` takes a `wireframe_only` flag that drops
3DFACE quad fills (built from `key_vertices`) while keeping the
`all_wires.fill_tris` channel — that channel carries text-LOD greek
rectangles and PolyfaceMesh face triangles which must stay visible
in wireframe mode. 3DFACE edges stay on regardless of mode.
Solid3D mesh wireframe rendering, Hidden Line z-prepass, and Flat /
Gouraud shader uniforms come in phases 1–4.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Type-as-you-go suggestion popup above the input that filters known
command names by substring (so `LEADER` surfaces both LEADER and
MLEADER). Up / Down navigates the list, Enter dispatches the
highlighted entry, clicking a row dispatches directly. Esc on a
non-empty input clears the buffer instead of escalating to
command-cancel.
The name corpus comes from `inventory::submit!` blocks placed next
to each `CadCommand` impl rather than a hand-maintained static list.
Adding a new interactive command means dropping one `inventory::submit!`
line in its own module file — the autocomplete picks it up at the
next compile. 98 submissions seeded across 60 module files;
`command::all_registered_command_names()` flattens them at runtime.
One-shot dispatch arms in `app/commands.rs` (NEW, OPEN, SAVE, UNDO,
…) don't have a `CadCommand` impl and are therefore absent from
autocomplete by design.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Add a ▸/▾ toggle button on the right edge of the input row. Tapping
it pops up the full backlog of everything the command line has pushed
since startup — useful once the on-overlay rows have faded out.
The dropdown is a fixed-height scrollable panel rendered above the
input pill. `anchor_bottom` keeps the newest entry in view on open
and `opaque` blocks wheel events from bubbling through to the
viewport shader behind it (without it, scrolling the history zoomed
the drawing). Submitting a command closes the dropdown so the new
prompt is immediately visible.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Two behaviour changes that bring the command line in line with
established CAD workflow:
1. **Always-on keyboard capture.** The input was blurred whenever no
command was running, so typed letters went nowhere until the user
clicked into the field. Replace the blur with a re-focus on every
command lifecycle transition (cmd_result.rs) and on viewport / tab
/ ribbon clicks (update.rs), focus the input at startup, and add
a global key subscription that catches any unhandled character key
or backspace and routes it into the buffer via two new messages
(CommandAppendChar / CommandBackspace) — so the command line keeps
accumulating keystrokes even if focus parks somewhere not
focusable. Removes the unused blur_cmd_input helper.
2. **Space submits.** Typing a space at the end of the input now
submits the buffer the same way Enter does. Only exception: an
active command that's currently collecting free-form prose
(TEXT / MTEXT / DDEDIT body, ATTDEF prompt / default value,
INSERT attribute value, ATTEDIT cell). Those advertise the new
`CadCommand::wants_text_with_spaces()` flag so the Space character
reaches the buffer as a literal.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Joining the OpenAEC Foundation (open-aec.com). Crate/struct become
OpenCADStudio, user-facing strings use the spaced "Open CAD Studio"
form, repo URLs point to HakanSeven12/open-cad-studio. Logo (window
icon + assets/logo.svg) redrawn with OCS initials. Drop examples/
binaries — unused.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Wide LWPolyline/Polyline2D fill bands now sit on the centerline:
- polyline_segment_fill arc center matched explode.rs / acadrust convention
(signed d_perp = r·(1-b²)/(1+b²), handles major arcs correctly)
- per-vertex hw0/hw1 taper applied along arc; tess density 24/circle
- synced_hatch_models subtracts hatch_offset from band boundary so it lives
in the same offset-rel space as the wire tessellation
LWDISPLAY:
- new command `LWDISPLAY [ON|OFF]` toggles header.lineweight_display
- LWT status-bar pill (between ORTHO and POLAR) drives the same flag
- bump_geometry() on change so the viewport re-tess immediately
Co-Authored-By: Claude Opus 4.7 <[email protected]>
The update notice dialog now mirrors what GitHub publishes: side-by-side
Installed → Latest version cards (the new one accent-tinted to draw the
eye) and a scrollable release-notes panel under them. Light markdown
rendering covers `##` headings, bullet lists, and inline bold/code
markers — enough for the GitHub release body format we ship.
- update_check::check_for_update() returns UpdateInfo { version, body };
body is parsed from the releases API JSON with a tiny custom
string-field extractor (\n / \" / \u handling) so we keep the
serde_json-free dependency footprint.
- Window grows from 480x240 to 560x460 and becomes resizable to make
room for the notes scroller.
- Layout tightens: header bottom padding drops 14 → 6, notes heading
10, and the notes block is wrapped in a Fill-height container so it
claims every leftover pixel — no more dead space between heading and
footer.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
A pinned "Start" tab now lives at index 0. It cannot be closed, opens
on launch, and replaces the model-space viewport with a welcome page —
similar to Thunderbird's first-run screen.
- Boot opens with only the Start tab; Drawing1 is no longer auto-spawned.
- The Properties left panel becomes a Recent Documents rail on the
Start tab. Recents persist to disk
(%APPDATA%/H7CAD/recent.txt on Windows, $XDG_CONFIG_HOME/H7CAD/recent.txt
on Linux, ~/Library/Application Support/H7CAD/recent.txt on macOS), up
to 20 entries, saved on every open and rehydrated at boot.
Each row opens or removes the file in place.
- The Support ribbon group (Donate / Report / About / Changelog) is
retired; the same actions surface on the welcome page instead. The
Donate button is the primary call-to-action — solid #B03020 brand
fill with a soft brand-tinted ambient glow halo behind the action row
(Thunderbird-style coloured glow against the neutral page).
- Drawing-only overlays (mouse-area, viewcube, navbar, dynamic input,
selection markers) are suppressed on the Start tab so its clicks
don't trigger CAD commands. OpenFile's "current_is_empty" check
refuses to replace the Start tab, and TabClose ignores requests on
it.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Adds a one-shot update check that runs on app boot and pops up a small
"Update Available" window when the GitHub releases API reports a newer
tag than this build's `CARGO_PKG_VERSION`.
- `src/update_check.rs` — async wrapper around a blocking `ureq` GET to
`api.github.com/repos/HakanSeven12/H7CAD/releases/latest`, returns
`Some(version)` when a newer release exists, `None` otherwise (silent
on network / parse failure so a missing connection never blocks
launch).
- `H7CAD::boot` chains a `Task::perform` next to the main-window open
so the check runs in parallel with first-paint.
- New window plumbed like the other floating panels (page setup, about,
etc.): `update_notice_window`/`update_notice_version` state, title
entry, `OsWindowClosed` cleanup, and a `ui::update_notice::view_window`
modal that shows installed vs. latest version plus "Later" /
"Open Release Page" buttons. Open routes through `open::that` to the
releases URL and dismisses the modal.
Dependency: adds `ureq = { version = "2", default-features = false,
features = ["tls"] }` — the smallest blocking HTTP client + TLS combo
that doesn't drag in an async runtime.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Tessellates each block_record once into local-coord LocalWires; Insert
references transform-copy + ByBlock-resolve the cache rather than
explode+re-tessellate per reference. Same-style wires inside one Insert
are NaN-batched into a single WireModel to keep wgpu buffer counts
sane — large blocks that previously bailed to a marker now render in
a handful of buffers each.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Big DWG/DXF files block the UI for seconds during parse + cache build,
leaving the user wondering whether the app froze. Split the file-open
flow into pick → load and show a modal overlay during the load: file
name, size, phase label (Reading / Parsing / Building caches /
Finalizing), animated indeterminate bar, and Cancel button.
Phase is tracked via a shared AtomicU8 written by the loader thread
and read by the overlay each frame. Cancel hides the overlay and
discards the result; the parser thread runs to completion in the
background since acadrust has no interrupt hook.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Parsing + DerivedCaches construction now runs entirely in a dedicated
OS thread inside open_path(). FileOpened handler only assigns the
pre-built caches, keeping the UI thread free during file load.
- Add build_derived_caches(): parallel hatch + mesh tessellation via rayon
- Extend Message::FileOpened / open_path return type with DerivedCaches
- Drop populate_*_from_document() calls from FileOpened handler
- Scale popup dropdown replaces cycle behavior; paper-space viewport scale
editable when a viewport is active/selected
- CANNOSCALE persisted via DXF $USERR1 (read on open, write on save)
- PSLTSCALE: linetype dash lengths scaled by viewport anno_scale so dashes
appear uniform physical size in paper space
- MultiLeader: arrow size, dogleg length, and text height scale with
anno_scale; leader line paths (world coords) stay fixed
- Leader: arrow size and hookline length scale with anno_scale; also
corrects world_offset subtraction that was previously deferred to the
TruckObject::Lines path
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Implements a full in-app file browser window for Save As, replacing the
rfd dialog that could not expose the selected filter index on Linux.
The new chooser includes directory navigation, a scrollable file list,
filename input, and a format drop-down (DWG/DXF × 2018/2013/2010/2007/2004/2000/R14).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
rfd does not expose the selected filter index, so the old DWG/DXF version
filters had no effect — every file was always saved as AC1032 (R2018).
Replace with a single custom iced Save As window that shows:
- File name text input
- Save-in folder input + Browse button (rfd folder picker)
- Format dropdown: DWG/DXF × 2018/2013/2010/2007/2004/2000/R14
- Save / Cancel buttons
The selected format is passed to save_as_version() which temporarily sets
doc.version before writing, so DwgWriter/DxfWriter emit the correct file
format. Also works in the unsaved-changes Save flow.
Closes#9
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Opens a floating OS window when the user tries to close a dirty tab or
quit with unsaved changes. The main window stays alive until the dialog
is resolved — Cancel aborts the close entirely. For quit with multiple
dirty tabs the dialog loops through each one individually.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Integrate NAVVCUBE, NAVBAR, PROPERTIES, FILETAB, LAYOUTTAB, TOOLPALETTES
and SHEETSET commands to toggle UI widgets at runtime. Add 15 new SVG icons
for view module tools previously using glyph fallbacks. Restyle all SVG
icons to use the established two-color scheme: #e0e0e0 for passive geometry,
#4cc9f0 for active/accent elements.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- REPORT opens GitHub new-issue page
- ABOUT opens a dialog window with version, OS and arch info + Copy Info button
- CHANGELOG opens GitHub releases page
- Fix Windows build: add windows-sys as target-specific dependency for PRINT command
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Redesign Insert ribbon tab with 6 groups matching screenshot layout:
Reference (Attach/Clip/Adjust large + Underlay Layers/Frames/Snap small),
Point Cloud (Attach), Block (Multi-View Block/Insert large + Create/Edit/Base small),
Attributes (Define/Edit large + Manage/Sync small),
Import (Import/Land XML), Content (Content Browser/Design Center)
- Remove Primitives group and dead box_prim/clear/cylinder/sphere modules
- Fix all compiler warnings with #[allow(dead_code)] on unused-but-intentional items
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
New StyleComboGroup RibbonItem renders a dropdown combobox for selecting
text style, dimension style, multileader style, or table style. Ribbon
groups in the Annotate tab now match the reference layout: each group
has a large tool on the left and a style combobox with tool rows on the
right.
Each combobox shows the active style name, opens a scrollable item list
on click, and has an optional "Manage…" row that fires the style manager
command (STYLE / DIMSTYLE / MLEADERSTYLE / TABLESTYLE).
Style state is synced from the document on every layer refresh via
sync_ribbon_styles(). RibbonStyleChanged message propagates selections
back to the acadrust document header and the active_mleader_style field.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Every dialog panel that previously rendered as an in-viewport overlay is
now opened as its own OS window, matching the behaviour of the Layer
Properties Manager:
• Page Setup (520×460, non-resizable)
• Text Style (620×460)
• Table Style (620×420)
• Multiline Style (620×420)
• Layout Manager (640×320)
• Plot Style Editor (780×540)
• Dimension Style Mgr (720×560)
• Keyboard Shortcuts (720×520)
Changes:
- mod.rs: replace *_open: bool fields with *_window: Option<window::Id>;
add window IDs to OsWindowClosed tracker; add per-window title strings.
- update.rs: Open handlers call window::open(); if already open, call
window::gain_focus() instead of reopening. Close handlers call
window::close(). OsWindowClosed clears all panel window IDs.
- view.rs: each window_id is matched at the top of view() and returns
the panel content directly. All overlay let-bindings and stack![]
references removed.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Adds STEPOUT / STPOUT / EXPORTSTEP command that exports all tessellated
Solid3D / Region / Body meshes to an ISO 10303-21 (STEP AP203) file.
Each triangle is encoded as a minimal ADVANCED_FACE with a PLANE surface
and CLOSED_SHELL topology — sufficient for import into all major CAD systems.
A file-save dialog picks the output path; the command line reports success or
errors. Requires at least one tessellated solid in the drawing.
Closes ROADMAP 14.10.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
The PRINT command renders the current layout to a temporary PDF (reusing
the existing PDF export pipeline) and dispatches it to the OS default
printer:
- Linux/macOS: `lp` (CUPS) with `lpr` as fallback.
- Windows: ShellExecute "print" verb (compiled-in, unused on Linux).
PLOT and EXPORT still open the save-file dialog as before.
Status messages are shown in the command line during the async job.
Closes ROADMAP 1.8.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Opens a reference panel listing all built-in keyboard shortcuts
(F3-F12, Ctrl+N/O/S/Z/C/X/V, etc.) and any user-defined overrides.
SHORTCUTS LIST — open the panel
SHORTCUTS SET <k> <c> — add/update a custom shortcut label
SHORTCUTS CLEAR <k> — remove a custom entry
Custom shortcuts are stored in app state (runtime only) and shown
in the panel alongside the hardcoded bindings.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Adds active_theme: Theme field to app state and wires the daemon's
.theme() callback to use it dynamically. COLORSCHEME <name> switches
among all 19 built-in iced themes (Dark, Light, Dracula, Nord, Tokyo
Night, Gruvbox, Kanagawa, Moonfly, Nightfly, etc.).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Panel overlay showing all layouts with their active status.
Supports: select, rename, new, delete, reorder (◀▶), set current.
Also adds Scene::swap_layout_order() for tab-order resequencing.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
