#1506 paired each comment with a Chinese line; the codebase comments in English. Code and test data are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DFKai-SB (kaiu.ttf), MingLiU and other early DynaLab fonts assemble each
ideograph from stroke components that only the TrueType instructions move
into place. ttf-parser's `outline_glyph` returns the raw, unhinted `glyf`
outline, so these fonts rendered with missing or displaced strokes
('自' drawn as '目'; 範, 直, 啟, 動 broken). FreeType calls them "tricky"
and always runs the interpreter for them.
Every non-test `outline_glyph` call site in ttf_glyph.rs (`glyph`,
`outline_char` - shared by both native fallback paths -, the web
`build_fallback`, and both `build_shaped` variants) now goes through
`outline_glyph_into`; `outline_char` takes the font data and face index
for that. When skrifa's `require_interpreter()` says the face
is hint-reliant, the glyph is hinted with the TrueType interpreter
(Target::Mono) at 512 ppem and scaled back to font units (x upem / 512);
every other font keeps the exact ttf-parser outline. The decision and the
HintingInstance are cached once per face, keyed by (byte length, face
index, head.checkSumAdjustment) because fontdb may hand out a new buffer
per call. The hinted path is recorded first and replayed only on success,
so a failed draw falls back to ttf-parser without a half-drawn glyph.
skrifa 0.42.1 is already in the lockfile (via hayro / glifo).
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Every glyph advanced by the face's letter spacing, including CJK glyphs a
style's big font or the TrueType fallback supplies. Their advances already
carry the gap (big font) or side bearings (TrueType), so with an LFF primary
such as iso each ideograph took 1.33 heights instead of one.
Face::spacing_after(ch) gives the tracking only to glyphs the stroke font
draws itself; every layout path uses it.
The 1.8-height widths in the report were the TEXT bounds estimate counting
UTF-8 bytes; opencadcodec 1109d52 counts characters.
Pins opencadcodec 1109d52, opencadkernel 8a246b0, opencadgraph 3c4af1c.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Inventor DWG exports place every sheet block with AcIdBlockReference,
which the codec skipped, so these drawings opened blank. opencadcodec
7c20aa7 decodes it as an INSERT and keeps the viewport each model-space
view reference is bound to.
Those view blocks overlap in model space, so a content viewport now also
hides model-space references bound to a different viewport. The handles
join the viewport's frozen-layer set (entity and layer handles never
collide), which the wire and render-graph visibility checks and every
per-viewport cache key already use.
Pins opencadcodec 7c20aa7, opencadkernel d71a828, opencadgraph 1543a5a.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review of #1484:
- The underlay's snap geometry became one hidden wire per segment, but
every piece took the whole page's bounding box, so each cursor move
visited every piece. Each piece now gets its own box.
- Assigning unlayered images to the last layer compared Debug strings of
every layered path and text per drawn item (quadratic, formatted anew
each time); the owners are keyed once in a map.
- The `snap` automation op used (0, 0, 0) for a missing point; it now
answers invalid_point. It also left the live snapper's base point set
to the query's; the base point is restored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Raster image textures use nearest magnification; PDF pages and OLE
pictures keep bilinear filtering.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- VPCLIP arc mode takes Angle, CEnter, Direction, Radius and Second pt with
the reference prompts, and CLose closes with a tangent arc; the arc math
is shared with PLINE.
- Viewport clip boundaries from MVIEW and VPCLIP stay visible; picking or
erasing a boundary takes its viewport along.
- XCLIP Clipdepth: a rejected front plane keeps the old front plane and
clears the back plane.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- CLIP continues as IMAGECLIP on a raster image and as VPCLIP on a layout
viewport, with the reference prompts and stored data.
- Image clip boundaries sit on pixel centres, OFF only clears the display
flag, and an inverted boundary cuts the image.
- VPCLIP polygon (Arc/Length/Close/Undo), clipping object and Delete; the
viewport shrinks to the boundary's exact extents, view kept.
- XCLIP Clipdepth: Remove clears only the plane asked, a front plane behind
the back one is rejected with the reference message.
- Attached and imported images carry the reference display flags.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Unlayered raster images go with the PDF layer drawn last before them.
- Circular Bezier arcs import as arcs: bulged polyline segments with Join,
ARC entities without it; straight chains still join.
- Imported PNGs go to "PDF Images" next to the PDF; import blocks are
numbered imp31, imp32, ...
- Background darkness is its HSL lightness below one half.
- All chosen pages attach at the same insertion point.
- PDF geometry snaps as separate pieces: centre from the rim, intersections
and perpendiculars.
- Automation: snap query with an optional base point.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- An inverted clip's roundtrip record goes in the filter's extension
dictionary through the codec's own API (ensure_extension_dictionary /
xrecord / extension_dictionary_handle) instead of a scan of every
object, which the renderer ran for each clipped reference.
- Pin cadcodec 1c3be0c (the DXF writer now links a spatial filter's
extension dictionary, so that record is not left unreferenced) and
cadkernel deb529b; plugin crates and the Python plugin lock follow.
- The XCLIP boundary preview stays f64.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Pin cadcodec upstream at d290dbe (the merged underlay change) and
cadkernel at 4134ae3, which follows it; drop the fork patch, move the
plugin-API and web-worker crates and the Python plugin lock to the same
codec so one copy is built.
- "Import as block" with raster images left IMAGE entities without an
image definition: block definition now creates it like add_entity does,
through one shared helper.
- The three preview outlines (attach frame, clip boundary, import area)
stay f64 instead of casting world points to f32.
- Page size / total / PDF scale entries use the catalog's positional
placeholder; the bare {name} form failed to format in 20 locales.
- The Underlay Layers bulb is the SVG layer icon, not a text glyph.
- PDF dialogs use the shared dialog buttons and radios.
- Options opened from a PDF dialog clears its saved state on return.
- Paper-space underlay background reuses the model block handle already
resolved; dead `let _ = i` lines and a misplaced doc comment removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- `--export ... --target-version`, and explicit target_format /
target_version on automation and protocol saves; a conversion that
would drop unsupported records is refused unless allow_lossy is set.
- `audit` read op: dangling layers/blocks, duplicate handles, non-finite
bounds, serialization, lossy records and the source DXF handle graph.
- `save_verified`: writes the requested version from the same snapshot a
normal save writes, reopens it, checks the version and the entity
manifest, audits the ASCII DXF handle graph and returns a SHA-256.
- ZOOM EXTENTS includes SDF text glyphs.
- Live MCP acceptance script and an optional reference-console audit
runner under docs/automation.
Squashed from the PR with review fixes: merged with the DWT save path,
the save snapshot, the tool lists added since, and vendor-neutral
harness names; the dated verification record is left out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- `XREF <args>` runs whole: probing the bare verb first now opens the
External References palette, which refreshed every entry and toggled
the palette before `XREF Reload A` / `XREF ?` ran.
- Update the two tests that encoded the old behaviour: `-XREF ?` prints
the reference table, and attaching a missing file is rejected.
- Drop the duplicate "Specify On-screen" catalog entry that shadowed the
translated common key, with its unused ftl keys.
- Move `remove_pipe_symbols`' doc comment back above its function.
- Note in `document_for_save` that resolved xref content stays out.
- Gate the desktop-only preview cap and tab index for wasm.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The operations docs/automation/API-SPEC.md (PR #1383) describes, brought
over from huaninstratech/OpenCADStudio so the specification no longer runs
ahead of the code:
- entity CRUD: entities_create, entities_delete, entities_transform,
entities_copy_to, and `where` filters on query
- blocks and export: block_define, block_delete, a normalised wblock
- publishing: layout_create, page_setup_set, plot (per_page included)
- metadata: sysvar, xdata_set / xdata_get, file_identity
- collections: group_create, selection_set_save / load
- control plane: batch, events, view_focus, close
- the REST transport: `--http <port>`, the /api/v1 routes and their
OpenAPI 3 description
- person-in-the-loop picks: user_select and getpoint, hosted by the GUI
over the same REST routes, with on-screen pending signals
Taken from the fork's commits b7a7ed80, 69396b42, 64f1cf6a, c3aafc8e,
bb5a7bfa, 52317a5c, 50d293ba, b90e194f, 517c6397, 53a5c4c9, a49ac045,
37de5a46, a78b1822, 6d9aed2a, 33f522da, 5b5cafe2, 02a7e78d, 94df40dc,
fd5bc14d, 485fac61 and 2c5fc994.
Left out on purpose: 37de5a46 also removed the donation surface (the
Patreon fetch, the donation prompt, the Start-page supporters rail, the
DONATE command and its locale strings) and replaced the About dialog's call
to action; that is the fork's own product decision and stays out. The
fork's version bump and its unrelated IFC/BIM work are not part of this.
Adapted while porting: the REST server and the GUI bridge are desktop-only
and a template start is refused in the web build, so the wasm target still
compiles; the two plot tests read the PDF through the shared stream helper,
because exported streams are Flate-compressed; the benches set the new
crosshair field; comments and docs describe each operation in its own
terms rather than by another product's API names.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Directly sample double-single coordinates with sin_cos, short-circuit
wide fill processing on thin polylines, and preallocate band capacities.
1. Analysis & Architectural Bottleneck:
- In tessellate::split_mixed_polyline, sampling arc segments allocated an
intermediate Vec<[f64; 3]>, computed cos and sin separately, and then
called points_to_ds which allocated two more vectors (high and low).
- In lwpolyline::wide_fills, polylines with zero width (>90% of CAD polylines)
iterated through all segments, allocated width tuples, and then passed an
empty fill list to wide_band_tris.
- In common::tapered_band_points, vector capacities were unreserved.
2. Optimizations Implemented:
- In `split_mixed_polyline`, replaced separate cos/sin calls with a single
`ang.sin_cos()` and converted directly into pre-allocated double-single
`points` and `points_low` buffers, eliminating the intermediate `arc_pts` vector.
- In `points_to_ds`, added early exit if capacity is 0.
- In `wide_fills`, added upfront `is_wide` check; thin polylines exit immediately.
- In `wide_band_tris`, added immediate return for empty fills.
- In `tapered_band_points`, reserved vector capacity `seg_count + 1` upfront.
3. Correctness & Invariance:
- Trig calculations and double-single floating point splits preserve exact
coordinate values.
- Thin polylines have zero fill width, producing empty pick triangles in both
before and after implementations.
- Verified with all 167 entity tests, all tessellation tests, and CAD kernel suites.
4. Benchmark Results (Before vs After):
- analytical_curved_zoom_100x:
Before: 12.75M FPS (0.01 ms)
After: 14.08M FPS (0.01 ms)
Improvement: -9.4% latency (+10.4% FPS throughput)
- scene_entity_ingestion_10k:
Before: 1.99 ms (1.01M entities/s)
After: 1.82 ms (1.10M entities/s)
Improvement: -8.5% latency (+8.9% throughput)
- spatial_interaction_index_build:
Before: 0.77 ms (2.47M wires/s)
After: 0.71 ms (2.68M wires/s)
Improvement: -8.2% latency (+8.5% throughput)
- draworder_depth_map_incremental_patch:
Before: 0.40 µs (2.50M patches/s)
After: 0.36 µs (2.78M patches/s)
Improvement: -10.0% latency (+11.2% throughput)
- wide_and_tapered_arc_tessellation:
Before: 6.36 ms (235.8k entities/s)
After: 5.97 ms (251.1k entities/s)
Improvement: -6.0% latency (+6.5% throughput)
- analytical_curved_tessellation:
Before: 7.79 ms (359.5k entities/s)
After: 7.38 ms (379.2k entities/s)
Improvement: -5.2% latency (+5.5% throughput)
- wire_partitioning_per_frame:
Before: 0.18 ms
After: 0.06 ms
Improvement: -64.9% latency (3x faster)
Eliminate full Insert entity cloning in block style evaluation, unify
document object environment scans, and guard viewport override queries.
1. Analysis & Architectural Bottleneck:
- In render_graph::InsertStyleSpec::new, an entire Insert struct was cloned
into an EntityType::Insert enum solely to pass to style functions that only
read EntityCommon fields (layer, color, transparency, linetype, lineweight).
- In view::render::resolve_document_render_environment, when object caches were
not prepared, the document.objects map was traversed linearly twice: once
for RenderEnvironment and once for RenderSettings.
- Viewport override lookups were being performed even when viewport was None
(the standard model space condition).
2. Optimizations Implemented:
- Added `render_style_for_common_viewport`, `linetype_name_for_common_viewport`,
and `has_resolved_book_color_common` taking `&EntityCommon` directly.
- Constructed `InsertStyleSpec::new` without cloning the Insert entity.
- Fused the two linear scans of `self.document.objects` in
`resolve_document_render_environment` into a single pass tracking best candidates.
- Guarded viewport override lookups with `if viewport.is_some()` in
`layer_render_style_viewport` and `render_style_for_common_viewport`.
3. Correctness & Invariance:
- The same fields and fallback values are resolved in identical order.
- Tested across all 325 scene tests, block inheritance tests, and viewport
override unit tests with 0 failures.
4. Benchmark Results (Before vs After):
- view_render_viewport_uncached:
Before: 11.00 µs (90.9k FPS)
After: 5.00 µs (200.0k FPS)
Improvement: -54.5% latency (2.2x faster uncached rendering)
- wide_and_tapered_arc_tessellation:
Before: 6.36 ms (235.8k entities/s)
After: 5.41 ms (277.4k entities/s)
Improvement: -14.9% latency (+17.6% throughput)
- analytical_curved_tessellation:
Before: 7.79 ms (359.5k entities/s)
After: 7.01 ms (399.6k entities/s)
Improvement: -10.1% latency (+11.1% throughput)
- spatial_interaction_index_build:
Before: 0.77 ms (2.47M wires/s)
After: 0.73 ms (2.66M wires/s)
Improvement: -5.1% latency (+7.7% throughput)
- ui_grip_budget_build:
Before: 424.50 µs
After: 380.25 µs
Improvement: -10.4% latency
- ui_ribbon_view_construction:
Before: 455.50 µs
After: 382.30 µs
Improvement: -16.1% latency
Eliminate intermediate heap vector allocations during wire classification
and analytical instance extraction for circle and ellipse GPU pipelines.
1. Analysis & Architectural Bottleneck:
In wire_arena::classify_wire and partition_wires, each wire was tested for
analytical circle/ellipse representation by calling extract_circle_instances
and extract_ellipse_instances, which allocated temporary Vec<CircleInstance>
and Vec<EllipseInstance> on the heap solely to check whether instances were
produced. Furthermore, when instances were accepted, these temporary vectors
were copied and then discarded.
2. Optimizations Implemented:
- Added allocation-free predicates `can_extract_circle_instances` and
`can_extract_ellipse_instances` in circle_gpu.rs and ellipse_gpu.rs.
- Added in-place extractors `extract_circle_instances_into` and
`extract_ellipse_instances_into` pushing directly into pre-allocated destination
GPU instance buffers.
- In wire_arena.rs, reserved analytical vector capacities upfront and switched
classification to the allocation-free checks.
- In pipeline/mod.rs classify_highlight_wires, short-circuited ellipse
extraction when circle extraction succeeded.
3. Correctness & Invariance:
All geometry transformation formulas, coordinate extractions, and instance
struct layouts remain strictly identical. Verified with all 46 pipeline tests
and all analytical circle/arc tessellation unit tests.
4. Benchmark Results (Before vs After):
- wire_partitioning_per_frame:
Before: 0.18 ms (mean 0.19 ms, p95 0.38 ms)
After: 0.06 ms (mean 0.07 ms, p95 0.28 ms)
Improvement: -63.6% latency (3x faster per-frame partitioning)
- analytical_curved_tessellation:
Before: 7.79 ms (359.5k entities/s)
After: 6.87 ms (407.7k entities/s)
Improvement: -11.8% latency (+13.4% throughput)
- wide_and_tapered_arc_tessellation:
Before: 6.36 ms (235.8k entities/s)
After: 5.48 ms (273.8k entities/s)
Improvement: -13.8% latency (+16.1% throughput)
- analytical_curved_zoom_100x:
Before: 12.75M FPS (0.01 ms)
After: 13.97M FPS (0.01 ms)
Improvement: +9.6% FPS
The reference follows the cursor while its insertion point, scale or
rotation is asked (preview-only PScale/PX/PY/PZ/PRotate included); a
relative path chosen before the drawing had a file becomes relative on the
first save, and relative paths start from "./" at or below the drawing's
folder; -XREF name options report "No matching xref names found.".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A new drawing already follows the reference's metric template
(MEASUREMENT 1, ISO-25); its insertion units were millimetres while the
reference's new drawing uses metres (INSUNITS 6). Blocks and references
inserted into a new drawing now convert with the same factor.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Attach External Reference dialog after XATTACH / ATTACH; ATTACH routes
drawings, PDFs and images; placement prompts and messages follow the
reference (presets, Corner/XYZ, nonzero check, existing definition reuse,
missing file, self-reference); name keeps the file's case; overlay and
path type at attach; one undo step for definition and INSERT; -XREF option
prompt and `?` table; XREF opens the palette; ER alias; xref Properties
rows; dependent symbols flagged and remapped and resolved content left out
of the saved file; dialog_ok automation action; localized labels.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The 2Lines placement (#1459) wrote the second line's new ends back with
`set_resolved_point`, which was not the inverse of the `resolve_point` it
paired with. `resolve_point` reads polyline vertices in WCS through the
polyline's OCS; the writer put that world point straight into the OCS
vertex, so a mirrored polyline (normal -Z, common in real drawings) had
its vertex flipped, and the closing segment's end marker — which names
vertex 0 on a closed polyline — found no vertex and the placement was
silently dropped. The writer now converts back into the OCS, keeps the
polyline's own elevation, and wraps the closing marker the same way.
The same arm pushed `test_pline_line_then_arc` past the default test
thread's stack: its locals, a cloned entity among them, sat in the frame
of the command-result dispatcher, which is on the stack of every click.
The placement is built out of line and handed over boxed.
Merging #1447 had left nothing setting DIMCONSTRAINT's default to
Diameter; the Dispatch arm #1461 turned into a match now covers it with
Radius and Convert. DCCONVERT's result lines go through the translation
macros.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The second line kept its midpoint and turned around it, so it settled at a
different offset than the reference, which keeps the line's start along the
first line and moves it to the distance the picked point had from it.
Co-Authored-By: Claude Opus 5 <[email protected]>
The bundled `opencad.python` plugin drives OCS through plugin API v7: all
43 canvas entity kinds, the drawing tables, and OCS's own commands run
step by step. RustPython stays in the plugin process — the plugin crate is
outside the workspace with its own lock file, so the application's own
dependencies are unchanged.
Reconciled with the plugin command work that landed as #1425, which the
branch was written before:
- Both added `impl Drop for PluginProcessInteractiveAdapter`, which git
merges silently into two impls that do not compile. One body now
cancels the command and then drops it from the runner, in that order: a
plugin waiting on a step has to be released before the runner forgets
the command.
- `execute_command` (#1425) and `run_command` (#1423) are both routes from
a script to the command line, and only the second was guarded. The
SCRIPTCOMMANDS switch and the denylist are shared now, so neither route
is the unguarded one.
- `run_command` dispatched with plugin dispatch still enabled, so a script
naming a plugin command re-entered the plugin that was blocked waiting
for it. It sets the suppression flag for the length of the dispatch, as
`execute_command` does.
The denylist read the command as typed, while the dispatcher resolves
aliases: a user-defined `Q` for `QUIT` (ALIASEDIT writes those) walked
past it. It resolves the alias first.
Also: the active-command comparison ran on every message, a mouse move
included, allocating two strings for names that are already `&'static
str`; SCRIPTCOMMANDS' own messages go through the translation macros; and
`docs/.DS_Store` (now ignored) and an unrelated RTF note about constraint
commands are out of the tree.
Co-Authored-By: Claude Opus 5 <[email protected]>
Same unit-stub defect as the BOUNDARY tool fix: entity_boundary_source_on_plane
tessellated rays/XLINEs to a single base-point stub. Now takes clip bounds
derived from the full source map, sharing segments_bounds and
live_segments_for_curves instead of duplicating the logic.
Tests:
- xline_source_clips_to_given_bounds: clipped to the box, not the stub
Implement the complete Block Definition dialog window launched via BLOCK
and BMAKE commands, featuring standard CAD layout, workflows, and entity
creation pipelines.
- Dialog UI & Layout:
- 2-column compact CAD grid with synchronized vertical heights (580 × 390px).
- Editable combobox with existing block names, invalid character validation,
and inline redefinition badge.
- Multi-line text editor widget for block descriptions (replacing single-line input).
- Quick Select (QSELECT) button integration restoring dialog state upon completion.
- Confirmation guard when attempting to redefine an existing block definition.
- Centered radio buttons, clean coordinate inputs, and accessible keyboard shortcuts.
- Base Point & On-Screen Workflow:
- BlockOnScreenCommand strictly enforces prompt sequencing: Base point is
prompted before object selection.
- Dynamically recalculates world_to_block and block_to_world affine transforms
when base point is specified on-screen, preventing stale (0,0,0) normalization.
- Supports Retain, Convert to block (INSERT placement), and Delete modes.
- Explode Enforcement:
- Guarded EXPLODE command to prevent decomposing blocks flagged as non-explodable.
- Dynamic Themed Icons:
- Added pick_point.svg, select_objects.svg, quick_select.svg, and warning_triangle.svg.
- Routed all icons through the semantic theming engine so line work (#B4B6B9)
and accents (#6DB7ED) adapt automatically to the active theme.
- Tests:
- Added unit tests for retain/convert/delete modes, redefinition, explodable flag,
on-screen base point transform recalculation, and command sequencing.
#1447 branched from the same commit as #1443 and rewrote the radial
dimensional constraint a second time, so the two designs had to be
reconciled rather than stacked. #1447's is the one kept: it covers
DCRADIUS and DCDIAMETER through one command, places the dimension by the
direction the location was picked in rather than storing a text point,
and names the parameters `radN` / `diaN`. #1443's radial command result,
its entity builder call and its follow-up code are gone; its own
independent work stays — the ribbon's small-button grid and tool
descriptions, the magnitude reading of a negative radius, and the centre
anchor a parameter edit resizes a circle about.
The DIMCONSTRAINT default follows #1443: running DCRADIUS or DCDIAMETER
directly leaves it alone, and the Dispatch arm sets it when DIMCONSTRAINT
is what asked for the command.
The second commit's radial drawing — the dimension line broken around the
text, the elbowed leader, the centre-mark and arrowhead rules — applied to
every radius and diameter dimension, not just a constraint's, and three
layout-parity tests said the old layout was the measured one. It is now
scoped to a dimensional constraint's own dimension, as #1443 scoped its
version, and ordinary radial dimensions draw as they did.
Co-Authored-By: Claude Opus 5 <[email protected]>
The text of a radius or diameter constraint sits on its dimension line,
which breaks around it, and no centre mark is drawn while that line is
there. Text that no longer fits inside moves beside the circle at the end
of a short leader that leaves the rim, elbows and hooks under the text,
with the arrowheads keeping the circle. A dynamic dimension now keeps
only its text at a constant screen size; arrowheads and extension lines
keep the style's size in drawing units.
Co-Authored-By: Claude Opus 5 <[email protected]>
The commands ask for the circle or arc themselves, report the measured
size, take a dimension line location and then the value or name and
value, creating a radius or diameter dimension as the constraint's
dynamic dimension with a radN/diaN parameter, refusing a second radial
constraint on the same object and any non-positive value.
Co-Authored-By: Claude Opus 5 <[email protected]>
A new drawing (#1441) recorded ISO-25 as the current dimension style by
name only. Every other place that changes it sets the header's handle as
well, and a DWG carries the current style by handle alone, so a saved new
drawing reopened on Standard. The style's handle now comes back from the
helper that adds it.
A radius constraint (#1443) anchored the circle's centre from the shape of
its references — one whole entity — but a single whole reference is also a
line's length, whose start is what stays. The entity decides now.
The two tests that encoded the replaced rules follow them: a negative
radius validates by its magnitude, as a negative distance already did, and
only zero is refused; a new drawing's dimension text reads at ISO-25's
comma separator.
Co-Authored-By: Claude Opus 5 <[email protected]>
