The guard remembered only the last announced (tab, generation), so
switching A -> B -> A announced A's load again. Each tab now carries
its own pending flag, set when a document is installed and cleared by
the boundary dispatch.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Reference-only entities (plugin API v9): a scene-scoped, in-memory
designation for plugin-owned display geometry, plus HostNotification
dispatch to native plugins so they can re-mark on DocumentOpened.
Resolves the new DeltaSnapshot site in block_editor.rs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Close the no-load-callback gap: on_notification was a dead dispatch sink —
a plugin had no way to learn that the active document changed, the selection
changed, or that a document opened, so runtime designations could not be
re-seeded after a load.
Dispatch the existing plain variants at the fingerprint-guarded boundaries
the v4 bridge already uses: DocumentChanged (the active tab's settled
geometry epoch) and SelectionChanged (the selection set) leave through
BuiltinPlugin::on_notification at the post-message boundary — after the
mutation settles and pending history scopes closed, never mid-undo or
mid-pick — and at the automation post-op boundary. Plugin-initiated writes
publish immediately after settling, like the drawing-changed event; the
boundary fingerprint guard deduplicates.
Add the additive HostNotification::DocumentOpened { tab_id } variant
(discriminant 10, the counterpart of DocumentTabClosed): fired exactly once
per whole-document install — file open, template new, system open — keyed on
a new per-tab document generation, so an edit can never repeat it and a
reload fires it once. The API version stays v9 (the bump is unreleased).
Write semantics for handlers, tested and documented: a handler may call
HostApi write methods through the same session (set_reference_only at
minimum); its write bumps the epoch, the next boundary notifies once more,
and because re-marking already-designated geometry is a documented no-op —
no epoch bump, no undo step, no publish — the loop terminates. History
(undo/redo) replay itself emits nothing; the boundary is the only channel.
No Python mapping, like the rest of this increment.
Per the upstream review of the XDATA-based storage: the host no longer writes
its own state into the saved file. The marker record under the host-owned OCS
APPID, the on-first-use APPID registration and the verbatim-EED rewrite
handling are removed; the single source of truth is a scene-scoped in-memory
set of entity handles (Scene::reference_only) that dies with the drawing tab,
so a reopened file starts undesignated and the owning plugin re-marks on the
document-opened notification.
All behaviour sites are unchanged, driven by the set: the wire stamp moves
from an XDATA read to a set lookup threaded through the tessellation
pipelines (tessellate_entity and the dimension text path take the handle set
as a plain parameter), and the pick filters, selection retains and
update/erase refusals read Scene::is_reference_only.
Undo keeps the entity-write contract: set mutations are recorded as explicit
first-touch before/after values on each history delta (the parametric-
constraints channel pattern). A designation inside a plugin push_undo scope
joins it, a scope-less change is one step of its own, an idempotent re-mark
records nothing, erasing a designated entity drops the set entry with the
entity, and undo/redo restores entity and designation together.
The round-trip test is inverted: reference_only_designation_is_not_written_
to_dwg_or_dxf now asserts the marker appears in neither format's bytes, that
no OCS APPID or marker record survives a reload, and that the designation
stays live in memory.
Open the Edit Block Definition dialog when BEDIT is invoked without an active selection, listing candidate block definitions alphabetically while filtering layout records, anonymous blocks, and external references. Allow typing a new valid block name to start an empty block editor session that only commits to the drawing block table upon explicit save.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
Lines still showing when the pointer reaches the overlay history no
longer fade under it; leaving restarts their COMMANDLINEFADETIME.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A save records the entered model viewport (or the sheet) as the layout's
last active viewport, and opening the layout enters it again with its
UCS. Picks up the codec fix that kept a last-active link from being read
as the sheet viewport (codec d57097c, kernel b40fa59, graph 2360341).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Every weight under 0.26 mm was clamped to the screen's 1 px floor before
the PDF and SVG exporters saw it, so 0.00, 0.09, 0.13 and 0.25 mm all
plotted alike. The floor now applies on the GPU only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The docked panel and Quick Properties render the same rows from one
state, so a picked colour opened both dropdowns and each swallowed the
other's click.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A ten-minute time::every on wasm piles up long setTimeouts in the shared
wasmtimer driver until it stops waking every timer, which silenced the
automation channel and drop-open about 8 s after load.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A lone Alt shows a code on every ribbon tab and quick-access button.
Typing a tab code opens the tab and shows the codes of its buttons,
dropdowns, slide-outs and collapsed panels; a button code runs it, a
dropdown or slide-out code opens it and shows its item codes, Esc goes
back one level. Codes follow the reference ribbon; buttons without a
reference counterpart get none and unnamed menu items are numbered.
Codes are drawn as accent pills over the widgets that reported their
bounds in the current frame, with a hint bar under the ribbon. While
the tips are open keys go to them only. The automation gets a keytips
action and read operation.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Synchronize the native parametric graph only when replay changes constraints or named parameters. Geometry and visibility history preserve existing imported network identities and ownership. Add a regression for a rejected block copy followed by local undo and redo.
Create a new named definition from current session edits, restore the source checkpoint, and continue editing the copy with fresh local history. Add the name dialog and Save dropdown, clone supported owned metadata onto independent handles, and refuse unsupported relationships atomically.
The right-edge toolbar of a REFEDIT session now shows the definition
being edited (REFEDITNAME) as an accent pill with the number of objects
in the working set, Add to / Remove from Working Set buttons with their
own icons (REFSET Add / Remove, straight to object selection), and
Save / Discard in a separate group below a rule.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
REFEDIT opens a dialog after the pick: the nesting chain as chips with a
preview of the chosen definition, all objects or picking them in the
drawing, attribute definitions (offered only when the definition has
them), locking objects outside the working set and unique names for an
external reference's named objects. The settings are remembered.
With unique names an xref's dependent layers, linetypes, text styles and
blocks are checked out as $N$NAME records of their own; without, under
the plain name, sharing a host record of that name. Save writes them back
under the reference's names, and the records made for the session are
removed when it closes. -REFEDIT uses the remembered settings.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
IMAGEADJUST (alias IAD) takes the selected raster images or asks
"Select image(s):", then opens a dialog with a before/after preview of
the first image and brightness, contrast and fade rows (bar plus
stepper, whole numbers 0-100). Apply writes the values to every chosen
image as one undo step; restore defaults sets 50/50/0. Adds the
image_adjust automation action and the image-adjust locale group.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
In the Block Editor, BVSTATE makes a new visibility state, makes one
current, renames or deletes one; BVHIDE and BVSHOW hide or show the
picked objects in the current state (BVSHOW shows every object of the
block while they are picked). The first use makes the block dynamic.
The states are stored as the format keeps them: a
BLOCKVISIBILITYPARAMETER in the block's ACAD_ENHANCEDBLOCK evaluation
graph with its visibility grip and the grip's two location expressions,
the round-trip purge preventer, AcDbDynamicBlockTrueName /
AcDbDynamicBlockGUID / AcDbBlockRepETag on the definition and element
tags on each of its objects. The definition shows its first state; a
reference given another state gets its own evaluated *U copy, tagged
AcDbBlockRepBTag and linked back through AcDbBlockRepresentation /
AcDbRepData, so it shows that state and the other references do not
change. Saving the block drops erased objects from the states.
Checked: a block authored this way reads back with its states and
reference link from DWG and DXF, and the ODA converter accepts the DWG.
Closes#1566
Co-Authored-By: Claude Opus 5.5 <[email protected]>
REFCLOSE Save on an xref replaced the referenced file's model space with
the working set alone. With the Nested selection method the objects that
were not checked out stay in the definition, but they were deleted from
the file on disk. Write back every object of the saved definition, and
copy the file to .bak first when ISAVEBAK is on, as a drawing save does.
Also translate the new REFEDIT prompts into the other 20 locales; the
catalog test requires every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
MATCHPROP transfers properties from a source object onto others, so the CAD
crosshair gives way to a monochrome paintbrush whose tip sits on the pick
point - the AutoCAD feel for the same command.
The glyph borrows the crosshair's own colour (including a user-customised
one) and uses a single stroke weight plus one filled wedge, so it reads as
part of the CAD cursor family rather than clip-art. It is drawn instead of
the crosshair, never on top of it, and only while the command is armed.
The web build has no font folder, so a text style whose TrueType file is
not a bundled Noto subset falls back to it. font_register takes the file
from the host page:
{"op":"font_register","file_name":"Brand-Regular.ttf","data_base64":"…"}
The faces join the font database, file_name resolves to the family of
the first face (case-insensitive, without directory, like installed
fonts), and open drawings lay their text out again (fallback glyph
cache cleared, text geometry invalidated per tab). The reply names the
family and the number of faces. Bytes without a face fail with
font_invalid. SysFonts::by_file becomes updatable for this.
Proposed in #1771.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
ARRAYEDIT picks an associative array (or takes the preselected one) and
its Source option opens the objects every item repeats in the Block
Editor; saving there updates all items at once. Counts and spacings stay
in Properties.
Refs #1109
Co-Authored-By: Claude Opus 5.5 <[email protected]>
