Generate a small wire-raster thumbnail when saving a DWG and embed it via
acadrust's preview API, so OCS drawings show a thumbnail in file browsers
and other CAD applications. Read the embedded preview back cheaply (file
header + preview bytes only, no full parse) to show a thumbnail per file
in the Start page's Recent Documents panel.
- io/thumbnail.rs: CPU rasterizer (current-layout wires -> BMP DIB) plus
a preview-only reader/decoder (BMP/PNG -> iced handle) for the Start
page.
- Embedded on save via stamp_thumbnail on both save paths.
- recent_thumbs cache filled on config load / recents change (never from
a view); a thumbnail is drawn beside each recent file.
Requires acadrust at 3111694 (preview read/write), already pinned in
Cargo.lock.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
App preferences were spread across six flat plain-text files (settings.txt,
recent.txt, recent_limit.txt, statusbar.txt, ribbon.txt, plot.txt), each with a
bespoke line parser and no grouping. Replace them with a single grouped JSON,
serialized via serde (enabling the derive feature; serde_json was already a
dependency).
- New app/config.rs: AppConfig { settings, recent, statusbar, ribbon, plot } →
<config>/settings.json (pretty JSON), load()/save().
- Make UserSettings, StatusBarConfig/StatusPill, CollapseMode and
PlotDialogState serde-derived; #[serde(skip)] marks the plot dialog's runtime
fields so only print preferences persist. Their bespoke .txt load/save is
removed.
- App gains current_config/apply_config/save_config: one AppConfig::load at
startup distributes into live state; every settings-change site
(persist_settings_if_changed, recent add/remove/limit, status-bar pill
toggle, ribbon density, plot commit) routes through save_config, which diffs
against the last write to avoid thrashing.
- Clean start: the old flat files are ignored (no migration). ocad.pgp stays a
separate hand-editable file.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Ortho and the running object-snap set are stored in the drawing header
($ORTHOMODE / $OSMODE) since they were bound to the file, so persisting them
app-globally in settings.txt too was redundant. Remove the ortho, osnap and
snap_modes keys (and the now-dead modes_from / snap_id / snap_from_id helpers)
from UserSettings, and stop reading/writing them in apply_settings /
current_settings.
No boot behavior change: Snapper::new already defaults to the same running-snap
set (Endpoint, Midpoint, Center, Node, Quadrant, Intersection, Nearest) with
the master off, and Ortho defaults to false — exactly what settings.txt used to
seed. Old settings.txt files keep working; the stale keys are simply ignored.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Coords pill always showed live absolute X,Y,Z, ignoring the drawing's
$COORDS (coords_mode) sysvar. Drive the readout from it:
- 0 static — the last picked point; the readout freezes between picks.
- 1 live — continuous absolute X,Y,Z (previous behavior, default).
- 2 polar — distance<angle relative to the last point while a command is
prompting for a point; absolute otherwise.
The cursor and last point are reported in the active UCS, matching the rest of
the readout. Clicking the pill cycles the mode 0→1→2→0 (CycleCoordsMode), marks
the tab dirty and echoes it; SETVAR COORDS still works. $COORDS round-trips per
drawing via acadrust's coords_mode.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Ortho and the running object-snap set were app-global (settings.txt only) and
Isolate/Hide was a session-only view state, so none survived save/reopen and
none were per-drawing. Bind all three to the file like AutoCAD:
- Ortho -> header.ortho_mode ($ORTHOMODE); running OSNAP <-> header
.object_snap_mode ($OSMODE bitmask) via a new SnapType<->bit map in settings
(osmode_from_snaps / snaps_from_osmode, round-trip tested). The header is the
per-drawing store, live state mirrors the active drawing: adopt header->live
on open and tab-switch, stamp live->header on save and when leaving a tab, a
fresh drawing inherits the current values, and SETVAR ORTHOMODE/OSMODE now
also update the live state. settings.txt stays as the boot/new-drawing
default; the per-file header overrides it on open.
- Isolate/Hide now set each entity's persisted invisible flag (DXF code 60,
which acadrust round-trips in DXF and DWG) in addition to the session set;
End Isolation clears it. The set is reseeded from invisible entities on load
and after undo/redo, the commands are undoable and mark the tab dirty. The
renderer already skipped invisible entities, so no render change was needed.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
When the viewport got too narrow the top-left render-mode bar and the
top-right ViewCube overlapped. Hide them adaptively, measuring the render
bar's real width rather than guessing:
- Wrap the render bar in DensitySwap, which measures its natural width every
frame and swaps it for an empty spacer once it no longer fits the tile. Add
report_width0 so it publishes that measured width to render_bar_w.
- Compute viewcube_visible from that measured width: the cube shows only while
bar_w + gap + cube region fits. This one flag drives the ViewCube nav/UCS
widgets, the hover hit-test, and — threaded through build_viewports /
build_viewport_for_pane / viewport_data_for — the GPU cube itself, which
previously ignored the pane flag (show_viewcube was inst.active only), so
the cube stayed while its surrounding widgets vanished.
Result: the ViewCube gives way first, then the render bar once it too has no
room — no overlap, sized to the bar's real width (which varies with the
render-mode label, split buttons and tile count).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
STRETCH picks its crossing window as two corner points. After the first
corner set last_point, Ortho/Polar constrained the opposite corner to an axis
through it, collapsing the window to a line and making selection impossible.
Add CadCommand::window_corner_pick(); STRETCH returns true for its two window
steps, and the viewport skips the ortho/polar (and OTRACK) lock for that point
in both the preview and commit paths — the corners are now free.
Also render the window like a normal box selection instead of a bare green
outline: add SelectionState::preview_box (a hit-test-free marquee), draw it
with the shared draw_marquee helper (green crossing fill + stroke), and drive
it from the command's new window_first_corner(). Cleared on command end.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
COPYCLIP/CUTCLIP used the mean of each entity's bounding-box centre as the
paste anchor. Standard clipboard behaviour puts the lower-left corner of the
box enclosing all copied items under the cursor. Union each entity's bbox min
corner instead, and rename clipboard_centroid -> clipboard_base (COPYBASE also
stores a picked point there, so "centroid" was inaccurate).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Command previews (MOVE, COPY, ROTATE, SCALE, STRETCH, MIRROR, ARRAY,
PASTE, INSERT) build ghost WireModels via WireModel::translated/rotated/
scaled/stretched/mirrored, but those helpers moved only `points`, never
`text_verts`, and the ghosts' glyphs were never uploaded — so text
vanished (or froze at its source) during the preview, same root cause as
the grip-drag case.
Transform text_verts alongside points in all five helpers (shared
map_text_verts, reconstructing + re-splitting the double-single world
position), and gather preview_wires' glyphs into the per-frame
preview-text buffer in the render path. This covers every command
preview automatically. The grip-drag else branch no longer sets
preview_text explicitly (the render gather handles it); the grip-slide
fast path keeps its own scene.preview_text channel (empty preview_wires,
so no double-draw).
MIRROR honours MIRRTEXT: on -> true glyph mirror via mirrored(); off ->
readable relocation via translated().
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Dragging text by a grip hid it until release. The dragged entity is
hidden from the base wire set and shown as a preview overlay, but its
SDF glyph quads (text_verts) were never uploaded for the preview, so
the text vanished mid-drag.
Add a per-frame preview_text GPU buffer (sibling to preview_wires). A
rigid whole-entity move of pure text (TEXT/MTEXT, Square insertion grip)
slides the drag-start glyphs by the drag delta instead of re-shaping the
run every move; reshape grips (MTEXT width), dimensions and wire
entities re-tessellate and feed the same buffer.
Also fold preview_text into render_signature: a pure-text slide leaves
preview_wires empty, so without it the scene-render cache froze the
dragged text at its first frame (grip moved but text stayed, then
jumped to place on release).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
on_enter/on_escape returned CmdResult::CommitEntity, which commits the
spline but keeps the command armed with its accumulated points — the
cursor stayed in spline mode and the next click began a new spline,
trapping the user in the command loop. Return CommitAndExit so Enter/Esc
finalize the spline and return to the selection state.
The in-progress preview drew only the straight control polygon. Sample
the actual degree-3 clamped B-spline (same control points + knot vector
build() commits) so the rubber-band traces the exact final curve.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The polar-tracking pill only right-click-cycled 15→30→45→90. Add an
AutoCAD-style angle picker opened from a caret on the pill: presets
90/45/30/22.5/18/15/10/5/1 plus a free-text field for any custom angle,
mirroring the existing units / scale status-bar popups. The chosen angle
persists like the other user settings.
Factor the shared chrome into one `split_pill(main, caret_msg, active,
open)` helper (+ `pill_text_color`) so the OSNAP and POLAR pills stop
hand-rolling the same outer border, background, caret and sizing — each
pill now only supplies its own main region. The caret is sized and
aligned to sit inside the single pill border on both.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Continue option committed a single tangent-continuing arc and left
the command. Now each picked end point commits its arc and re-anchors at
that arc's free end, so the user keeps drawing tangent-continuing arcs
until ending the run with Enter/Esc. A degenerate (collinear) pick stays
active instead of cancelling.
Because arcs now commit via CmdResult::CommitEntity (repeating) rather
than CommitAndExit, advance the ARC_CONT continuation anchor in the
CommitEntity arm too — guarded to line/arc so non-continuable repeats
(point/ray/spline) leave it untouched. This also lets a LINE run feed a
following ARC Continue.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
TEXTFILL 1 (default) fills TrueType text; TEXTFILL 0 draws it hollow
(outline only). Settable directly or via SETVAR, 0/1 or ON/OFF. SHX/LFF
stroke fonts are unaffected.
Reuses the existing stroke-SDF path: bake_glyph treats a TTF glyph as a
stroke (outline) field instead of a signed fill field when TEXTFILL is
off. Toggling resets the glyph atlas and re-tessellates text so quads
pick up the re-baked tiles. Persisted in user settings.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Run EXTRIM, pick a cutting boundary (line/arc/circle/ellipse/spline/
polyline), then click a side: every object crossing the boundary is
trimmed on that side and objects wholly on it are erased. Side is decided
by a parity crossing count (a segment to the pick point crossing the
boundary an even number of times is on the pick side), reusing the trim
intersection machinery; line boundaries extend to infinity. Line/arc/
circle are trimmed exactly; polyline/ellipse/spline via dense sampling.
Live preview while choosing the side: boundary in yellow, surviving parts
in blue, the removed parts in red.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Space now acts like Enter in the command line so commands advance
token-by-token (CAD convention). The whole value is handed to the submit
path, which tokenises multi-token lines, so a pasted or API-fed
`LINE 0,0 10,10` runs each space as a step separator instead of stopping
at the first token. A leading `>` switches to literal-space mode (for a
text string, a path, etc.) and is stripped on submit. All command-line
entry is shown uppercase.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Run QUICKPRINT (or QP), select objects, then Enter: the selection's
bounding box becomes the plot window and a PDF is written next to the
drawing (<name>_<timestamp>.pdf) using the active page setup, with no
dialog. Model space.
Implemented as a selection-gathering CadCommand (src/modules/view/
quick_print.rs) returning CmdResult::QuickPrint(handles); the host
(on_quick_print_handles) unions the picked entities' AABBs, sets the
plot window, and reuses the tested clipped window-export path.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Restructure the plot dialog into a style-manager-style master/detail: a
left list of page setups plus a right settings editor. The list shows
<none> (defaults + PDF) and <previous> (the settings the dialog opened
with), then the drawing's layouts (*Model*, *Layout1*, …) and its
standalone named page setups.
- Named page setups live in the ACAD_PLOTSETTINGS dictionary
(src/scene/page_setup.rs: names/get/save/delete/rename, creating the
dictionary if absent); DWG round-trip verified.
- Toolbar New / Copy / Delete | Set current / Preview / Print. Selecting
a row loads it into the editor; Set current writes to the active
layout. Copy duplicates a layout or a setup into a new named setup;
Delete/Rename apply only to named setups.
- Scene::plot_settings_for(name) generalizes effective_plot_settings so
any layout's settings can be loaded; on open the settings are
snapshotted for <previous>.
- Default selection: model space → <none>; a layout → its own setup.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the old Page Setup panel with a single OCS-styled plot/print
dialog (dropdowns for printer, paper, orientation, rotation, plot area,
scale, quality, shaded plot; checkboxes for plot options). PLOT / PRINT
/ PAGESETUP all open it.
- Printer output via lp: -d printer, -n copies, -o ColorModel=Gray,
print-quality, Resolution; Windows printto verb; list_printers via
lpstat. Preview opens a temp PDF in the OS viewer (never a save
dialog). PDF export reuses the tested pipeline.
- Window pick returns to the new dialog (was the old Page Setup) and the
clipped window plot drives PDF / printer / preview.
- Remember the user's print preferences across sessions in
config/plot.txt (printer, copies, quality, output options, area,
scale); drawing-specific fields (offset/center/rotation) seed from the
layout. Default plot area Window, scale Fit.
- Delete src/ui/window/page_setup.rs and its ModalKind / Message /
buffer state; fold on_page_setup_commit into apply_plot_page_settings.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Snap and hover hit-testing scanned the whole model wire set every cursor move; a heavily block-instanced drawing explodes to millions of wires, so this stalled for over a second per move. Add a cached spatial grid (wire_grid) keyed on the geometry epoch and query only the cursor neighbourhood via Scene::hit_test_wires_near. Gate the O(in-range segments squared) intersection passes on the in-range POINT count, not the wire count — a handful of curved wires, each hundreds of tessellated points, blew the quadratic up while the wire count looked modest. Give zero-size entities away from the origin (POINTs) a real cullable AABB, and fall back to a block sub-wire's own world points when its entity bounding box is degenerate.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Gradient Type (One/Two color), Color 1 and Color 2 editable via a generic field-keyed colour picker path. Background colour editable and stored as HATCHBACKGROUNDCOLOR extended data (group 1071 true colour), rendered in OCS as a solid backdrop drawn behind the pattern. Hide Origin X/Y for gradients (pattern-only concept) and drop the redundant gradient rows from the pattern branch.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Arc ribbon default + icon + dropdown order set to 3-Point. New ARC_CONT: tangent-continuing arc from the last line/arc endpoint, pick end only; Ctrl flips direction. Exit anchor recorded on commit (disambiguated by last pick) so chaining continues from the correct end.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
COPYCLIP/CUTCLIP computed the clipboard anchor by tessellating every
selected entity and averaging all wire vertices — O(total geometry),
~250 ms when copying a whole drawing. The anchor only fixes which point
of the selection sits under the cursor at paste, so the mean of each
entity's bounding-box centre is an equally valid, far cheaper origin.
Rebuilding the Properties panel aggregated shared/varying values across
the whole selection: O(n) per property row, plus an O(n^2) group filter
(group.handles.contains is a linear scan per selected entity). Selecting
or pasting tens of thousands of objects stalled the rebuild for seconds.
Above a cap, show a lightweight '<n> objects selected' panel instead of
the per-entity aggregation; bulk layer/colour/lineweight edits still go
through the ribbon.
The Current Vertex row is now a ◀ / ▶ stepper (new PropValue::Stepper)
showing "i / N". Stepping it moves the panel's focus through the
polyline's vertices — Vertex X/Y and the per-vertex start/end widths show
and edit the focused vertex instead of always the first — and the focused
vertex's grip is drawn hot (filled) in the drawing so it's visible while
navigating. Focus wraps around and resets to the first vertex when the
selection changes. Adds Area and Length to the LwPolyline Geometry group
(Polyline2D already had them). Applies to LwPolyline and Polyline2D.
The focused vertex is threaded to the per-entity property builder/editor
through a dispatch thread-local (like the curve-tolerance override), so
the PropertyEditable trait signatures are unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Copying and pasting a whole drawing froze the app. Three synchronous,
main-thread hot spots scaled with the full document rather than the
selection:
- Copy centroid did a linear document scan per selected handle
(wire_models_for / mirror_preview_parts), making copy O(H*N). Use the
document's O(1) handle index instead.
- The paste ghost translated every point of every clipboard wire on each
mouse move — O(points) per frame, which stalls placement of a huge
selection. Above a point budget, rubber-band a single bounding-box
outline instead (O(1) per frame).
- finalize_paste re-tessellated every solid in the document on each
paste. add_entity already tessellates pasted solids, so switch to the
incremental populate_missing_meshes_from_document.
OCS renders a dimension live from its definition points but exports a
baked *D block that other applications draw. An in-place edit (DIMTEDIT,
text override, DIMSPACE, any ReplaceEntity/ReplaceMany edit) changed the
dimension while leaving the old block, so the export kept the pre-edit
graphics — BricsCAD/ODA showed the stale dimension while OCS showed the
edit.
Add explode::invalidate_dim_block, which drops a dimension's baked *D
block (record + owned sub-entities, so no orphan blocks accumulate) and
clears block_name; bake_dimension_blocks then rebuilds a fresh block on
the next save. Call it from the in-place edit paths. The transform path
(MOVE/COPY/PASTE) keeps its own block in sync and is left untouched, so
dimensions loaded from other applications and not edited are preserved.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Add a MANUAL_SUPPORTERS list in patreon.rs for donations that arrive
outside Patreon; both the native and web boot paths merge it with the
fetched patrons and sort the combined list by amount (highest first,
then alphabetically). This also sorts the web supporters list, which
previously arrived unordered, and keeps hand-maintained supporters
visible when the Patreon fetch returns nothing (offline / no token).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Commands now expose their step options as clickable buttons rendered
inline beside the command-line prompt, so options need not be typed.
Adds a CmdOption/options() API to CadCommand: each command returns the
options for its current step; the command line renders them as
uppercase buttons and a click feeds the keyword to the command exactly
as if typed (an empty keyword submits like Enter).
Construction commands become "central" — CIRCLE offers [3P/2P/TTR/TTT/
DIAMETER], ELLIPSE [ARC/AXIS], ARC [SCE/SCA/SEA/SER/CSA/3P], RECTANGLE
[ROTATION/CENTER], POLYGON [CIRCUMSCRIBED/EDGE] — each keyword hands off
to the existing dedicated variant command via CmdResult::Dispatch,
instead of the variants only being reachable as isolated commands.
Migrates the existing bracketed-option prompts (PLINE, PEDIT, SPLINE,
SCALE, FILLET, CHAMFER, HATCH, GRADIENT, SOLID, POINT, RAY, XLINE, TRIM,
EXTEND) to the same button API and strips the option text from the
prompt strings, keeping value/coordinate hints. PEDIT's Width option
now enters a value sub-step so the button acts on click.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
External contribution by sLuCHa. A dimension draws from its baked *D block
(baked in absolute WCS); the in-drawing COPY re-points block_name to a
transformed copy (#161) but clipboard PASTE did not, so a pasted dimension
rendered at the source location (same drawing) or was missing (cross drawing).
Copy now snapshots each copied dimension's *D block into the clipboard
(dim_blocks); paste builds a fresh copy transformed by the paste offset and
re-points block_name — same- and cross-drawing alike, no orphan blocks.
Refactors out shared define_transformed_block / snapshot_block helpers
(behaviour-preserving).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Render the MTEXT background (never drawn before — the flags were only shown
read-only in the panel) and make it editable.
- Text arm emits an opaque fill_tris rect behind the glyphs: flag 0x01 uses
the entity background colour, 0x02 uses the canvas colour (a wipeout-style
mask). Box = glyph bounds padded by (background_scale - 1) × text height.
- Text frame (flag 0x10) draws a closed rectangle in the text colour around
the same box.
- Threaded `bg_color` into `tessellate()` (+ all callers and the
MultiLeaderTess trait) so the mask can use the drawing-window colour.
- Properties: "Background mask" is a Off / Fill / Mask dropdown, "Background
color" is its own colour picker (independent of the entity colour — new
PropBgColor* messages; picking a colour switches to Fill mode), and "Text
frame" is a checkbox toggle. Edits re-tessellate so the change shows live.
Renders via the face3d fill path, so the fill shows with FILLMODE on (same as
MLEADER background fill); the frame is a stroke and always shows.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Copy-paste (CTRL+C / CTRL+V) dropped dimensions. A dimension draws from
its baked *D block, whose geometry is in absolute WCS coordinates, and
the clipboard paste path added the dimension entity but never gave it its
own transformed block — unlike the in-drawing COPY, which does (#161). So
the pasted dimension kept pointing at the source block and rendered at
the original location instead of the paste point (same drawing), or had
no block at all (cross-drawing).
Capture each copied dimension's *D block into the clipboard, and on paste
build a fresh transformed copy of it and re-point the dimension's
block_name — for same- and cross-drawing pastes alike. Factored the
block-building out of clone_transformed_block into a shared
define_transformed_block, and the block snapshotting out of
capture_blocks into snapshot_block.
Remove the forces_endpoint_snap mechanism merged in #293:
CadCommand::forces_endpoint_snap, Snapper::snap_forced_corners /
forced_corner_modes, the PlotWindowCommand override, the on_tick +
click-commit wiring, and the associated tests. PLOTWINDOW now uses the
normal snapper like every other command.
Rationale: forcing Endpoint snap on regardless of the global OSNAP master
overrides an explicit user setting and is surprising — a plot window is a
coarse print region that usually wants a margin, not a corner lock, and
the forced set only caught Endpoint (not center/mid/intersection) so it
was a partial, opinionated helper. Parking it pending a design discussion
with the PR author; can be reinstated behind a clearer UX (e.g. respecting
OSNAP, or an opt-in modifier) if justified.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Three defects found reviewing the just-merged PRs:
- PLOTWINDOW forced corner snap (#293) only ran in the on_tick preview
path, so the marker highlighted an endpoint but the click committed a
plain snap — with the global OSNAP master (or Endpoint mode) off the
corner landed at the raw cursor, defeating the feature. Apply the same
snap_forced_corners branch at the click-commit recompute.
- build_dxf_pattern (#292) wrote the pattern line's LOCAL step into the
world-frame HatchPatternLine.offset. The new prebaked reader
inverse-rotates offset assuming world frame, so app-created hatches
(HATCH command) collapsed their spacing by cos(angle) — ANSI31 at 45deg
rendered 2.245 instead of 3.175 on both viewport and PDF/plot export.
Rotate the local step into world here so it round-trips and the stored
offset is format-correct for other CAD apps.
- far_from_origin_pattern_hatch_still_fills placed its offset ALONG the
45deg lines (projects to k~0), so it never exercised the span-cap fix and
passed even with the old absolute-index clamp restored. Move the offset
perpendicular to the lines so |k| >> the cap. Add
app_created_hatch_roundtrips_catalog_spacing to guard the offset-frame
fix (verified: fails at 2.245 without it, passes at 3.175 with it).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
PLOTWINDOW / PW now forces Endpoint object-snap while picking its two
corners, independent of the global OSNAP toggle, so the plot area lands
exactly on frame corners. The snapper's master toggle and configured
modes are saved and restored around the pick, so the user's OSNAP
settings are unchanged afterward.
- CadCommand::forces_endpoint_snap() opt-in (default false; PlotWindowCommand true).
- Snapper::snap_forced_corners() forces Endpoint only, then restores state.
Intersection is deliberately excluded: it is O(n^2) over the hit-test wire
set and froze the UI on large drawings when a plot window is picked
zoomed-out. Frame corners are endpoints, so Endpoint alone suffices.
- the cursor-move handler routes the plot-window pick through the forced path.
Works in model and paper space (shared pick path). Tests: opt-in flag;
forced mode set is endpoint-only; snapper state is restored after the call.
- Reword the two new explanatory comments to describe the behaviour on its
own instead of citing another product.
- window_to_sheet: drop the unused window_min parameter (the caller already
derives its coordinate offset from the returned min-corner position) and fix
the doc comment to match what the function returns.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Ribbon:
- A ▾ selector at the right of the tab row picks the tool-panel density —
Auto (size to window), Full, Compact, or Collapsed. The choice is persisted.
It hides itself when the tool row is already tight, giving the cramped tab
row its space back.
Start page:
- The Recent Documents card is restyled to match the Supporters card
(rounded corners, 20px padding, matching title + colours).
- Its scrollbar no longer sits on top of the row ✕ remove buttons (a gutter
is reserved).
- A footer control sets how many recent files to keep: [-] an editable count
[+] with the max shown. Typing applies on Enter; an over-max entry snaps to
the max. The limit is persisted and enforced on load and on every open.
- The "Support on Patreon" heart is now the SVG icon instead of a font glyph.
Config:
- Add a shared `config::config_dir()` helper; the recent-files and status-bar
stores now go through it instead of each re-deriving the path. New minus.svg
icon for the stepper.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Pick a rectangular window in model space with the existing PLOTWINDOW command (now enabled in model space, previously paper-space only) and export it to a PDF at a chosen ISO paper size (A4-A0), orientation and scale (fit or ratio). The window is a hard clip boundary. Adds paper-size presets, a window-to-sheet transform, scale + clip support in the PDF exporter, and Page Setup controls (format/orientation/pick window).
When the window is too narrow for the full properties panel it now
collapses to a slim vertical "Properties" bar (its label drawn rotated 90°
on a canvas), freeing width for the viewport. Clicking the bar expands the
panel back out alongside the bar; clicking it again re-collapses
(props_expanded state + TogglePropertiesBar). Reuses the rotated-label bar
helper originally built for the Start page.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rebuild the Start page as three parts — Recent Files (left), Welcome
(center) and Supporters (right) — that sit side by side while they fit.
When the page is too narrow for all three it falls back to a tab bar
(Recent Files / Welcome / Supporters) showing one section at a time, with
Welcome open by default (new StartSection state + StartSectionSelect).
The Recent Documents list moves off the left properties slot and into the
page itself. The Welcome column's button rows now flex-wrap, and the two
intro-video cards sit side by side, wrap to a stacked column when the
width gets tight, then shrink to fit the remaining height so they never
spill over the status bar. Trimmed the headline to just "Open CAD Studio"
(dropped "Welcome to" + the subtitle) and the "Release Notes" button, and
tightened the page's side padding.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
All ribbon dropdowns (tool dropdowns, undo/redo history, and the layer /
colour / linetype / lineweight / style combos) and all status-bar popups
(scale, units, OSNAP, isolate, filter, customization menu, layout list)
now open directly at their widget instead of at a layout-estimated
position, and flip to the other side when the panel would cross a window
edge.
Each dropdown/pill widget is wrapped in a transparent PosReport that
records its screen bounds into a thread-local map on draw. The overlays
read those bounds:
- Ribbon: Ribbon::dd_anchor(id, panel_w, win_w) returns
(align_right, h_pad, top); position_ribbon_dropdown places the panel
below the widget, flipping right-aligned near the right edge.
- Status bar: popup builders take (pill_bounds, win_size) and call
popup::position_statusbar_popup / popup_anchor, opening just above the
pill and flipping left/right at the window edge.
The window size is now tracked (win_size, set on WindowResized). The old
layout estimators compute_dropdown_left / compute_layer_combo_left /
compute_prop_combo_left / compute_history_dropdown_left and
osnap_popup_right_offset are deleted.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Third stage of the adaptive tool area (shrink -> compact -> collapse).
When even the compact panels don't fit, DensitySwap picks a new
CollapsePanels widget that keeps a left prefix of panels inline and
collapses the rest to buttons; clicking a button opens the full panel as
an overlay flyout anchored below it (closes on outside press, mirroring
color_select's Floating).
A collapsed panel's button shows a live representative tool — the panel's
last-used tool (tracked per panel in Ribbon::note_panel_tool on every
tool click), defaulting to its first — rendered as a large icon. To
support this, render_small now also renders Large* items small and
render_large now renders plain Tool/Dropdown items large. Large dropdowns
render as icon + label + a bottom arrow strip via a shared
render_large_dropdown helper, used in both the full ribbon and collapsed
panels.
Ribbon dropdowns (tool dropdowns + undo/redo history) now anchor their
overlay directly below their widget at any size: a transparent PosReport
wrapper records each dropdown button's screen bounds into a thread-local
map on draw, and the overlays read it via Ribbon::dd_anchor instead of the
layout-estimating compute_*_left helpers.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Start tab, drawing tabs and the "+" button now live in a single
WrapFlow instead of a fixed-height Row, so they spill onto lower rows
when there are more tabs than the width can hold. Drops the fixed 30px
height and the trailing Fill spacer.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The snap popup used a hardcoded 4 px right offset, pinning it to the
window's right edge — but the Osnap button sits well to the left, with up
to ten pills after it (Space, Scale, Units, Transparency, Isolate, …).
Anchor it by the summed width of the pills that follow Osnap, honouring
the user's per-pill visibility. iced gives the view no real layout
metrics, so the pill widths are estimated (icon pills fixed, labelled
pills approximate); the popup now opens by the button instead of the
corner.
Closes#248
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two refinements to Parallel snap. The acquired reference now keeps a
point on the line and draws a ∥ marker there, so the user sees which line
the parallel is measured from. And dwelling on that same reference line
again removes it (toggle), matching how OTRACK tracking points clear;
dwelling on a different line switches the reference. Same-line detection
uses parallel direction plus perpendicular screen distance, so it holds
across zoom.
Refs #277
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Parallel snap did nothing — the type was in the osnap set, priority and
marker, but there was no logic behind it. Implement it: hovering a line
(or polyline segment) for a short dwell acquires its direction as a
reference; then while drawing from the last point, when the cursor runs
parallel to that reference the point locks onto the line through the last
point parallel to it, showing the ∥ marker and the alignment guide.
Curves (circle/arc/ellipse) are ignored — parallel to a curve is
undefined. Works with only the Parallel object snap on, independent of
OTRACK; the reference clears with the command's tracking state.
Closes#277
Co-Authored-By: Claude Opus 4.8 <[email protected]>
