POINTCLOUDATTACH opens the Attach Point Cloud dialog after the file is
chosen; its Attach button lives in the Attach Underlay list instead of a
separate Insert panel. A selected cloud brings the crop tools to the
right-edge toolbar. POINTCLOUDSTYLIZE sets the stylization with the
reference's prompts, the External References palette lists point clouds
(unload, reload, detach, path), and definitions keep the header extents.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- V8 models are placed relative to their global origin (model header).
- A V8 model's extent is the union of its elements' stored ranges; a V7
model's text box is one text height tall.
- Files without a colour table use the standard DGN default table; colour
255 is read from the table's background entry.
- Colours from a file's colour table follow the background: near-white
colours swap with it, and over non-black backgrounds some shades drop a
step.
- DGN contrast pulls towards a pivot taken from the model's own colours,
after the fade, which is blended into the background first.
- Shared cells are read through their full 3D placement, so tilted
instances and 3D definitions are drawn in plan.
- Deleted V8 elements are skipped; lines along the model's extent stay in
the raster.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Insert > Reference: the PDF Attach button becomes an Attach Underlay menu
(PDF / DWF / DGN); its face runs the last one chosen.
- DWFATTACH, DGNATTACH and ATTACH on a .dwf/.dwfx/.dgn open the Attach
dialog for that kind: sheets or models with thumbnails (one chosen),
placement, path type, file details with the sheet / model size, and for
DGN the conversion units (sub units offer 1 / sub units per master as the
scale).
- DGN V8 true colours come from the ExtendedColors record packed in the
non-model attributes stream; the colour word's high part numbers them.
- A DGN model's extent includes each text's box (its length along the
baseline and 1.5 x its height), as the reference sizes a model.
- DWFx text uses the family named in its embedded (deobfuscated) font.
- DWF contrast pivots at 0.73 once colours are turned over for a dark
background.
- Hairline strokes are drawn solid one pixel wide, and underlay rasters are
made at or below their size on screen so those lines stay unbroken.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- PDFOSNAP, DWFOSNAP and DGNOSNAP are separate; UOSNAP sets them all and
reads 2 while they differ. Enable Snap switches the selected kind's.
- DWFCLIP / DGNCLIP clip their own kind with the kind's prompts and message;
CLIP routes DWF and DGN underlays there; Enter at a corner asks again.
- The right-edge underlay tools show for DWF and DGN too (import is PDF
only).
- Underlay layers: DGN levels (V8 level table, "Default" listed as "0"; V7
used levels named from the level name table), hidden through the layer
override data with the DGN placeholder string first; a plotted DWF has
none.
- V8 colour read from its colour word (by level, index, or a true colour
drawn as its nearest index); 3D V8 elements drawn in plan (lines, line
strings, ellipses and arcs by their orientation, text); a model's extent
includes its text.
- DWF 6 TrueType text (font, height, rotation from the font opcode) and DWFx
glyph runs are drawn; the default W2D colour map is the measured one.
- Contrast pulls lightness towards a per-kind pivot as measured (PDF 0.5,
DWF 0.243, DGN 0.65).
- Zoom extents includes raster images and underlays whose frames are hidden.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DWFATTACH / -DWFATTACH and DGNATTACH / -DGNATTACH attach a DWF / DWFx sheet
or a DGN (V7 or V8) model with the reference's prompts; ATTACH routes the
file types to them. The sheet or model is read into vector paths, drawn as a
transparent underlay raster (contrast, fade, monochrome and background
adjustment apply) and offers its geometry to object snaps. Definitions are
kept in ACAD_DWFDEFINITIONS / ACAD_DGNDEFINITIONS, the External References
palette lists and reloads them, and image textures get line-keeping mip
levels so thin underlay lines stay visible when zoomed out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review of #1489: the chips and the chosen page tiles drew a check mark and
the import preview's previous / next buttons single guillemets as text.
The web build's bundled font has no check-mark glyph, so it showed as an
empty box; UI icons are SVG. The ticks use the CHECK icon in the chip's or
tile's accent colour and the page buttons the shared arrow icons.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Attach PDF Underlay, Underlay Layers, PDF Import Settings and Import PDF
are laid out with rounded cards and accent titles, segmented controls for
path type, import layers and rotation, toggle chips for the on-screen
choices and import options, a page preview with previous/next for Import
PDF, always-visible file details, and a footer with help on the left and
the named action (Attach, Apply, Save, Import) on the right.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The node library leaves the overlay and becomes a dock panel (PanelId::
NodeGraph), docked on the right the first time the graph opens and movable
like any other panel; closing it closes the graph. It follows the block
palette's layout: title bar, then a search box with New / Open / Save
beside it, then the categories, of which only Objects starts open. Entries
are clicked (placed at the canvas top-left) or dragged onto the canvas.
The title bar (title, auto-collapse pin, close, drag to re-dock), the
toolbar icon button and the panel frame were copied across Properties,
Block Palette, External References and Browser; they are now
dock::title_bar, dock::tool_button and dock::frame, used by all of them.
Block Palette's two tool buttons gain tooltips, and External References'
Auto / Close tooltips are now translated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Pin cadcodec upstream at d290dbe (the merged underlay change) and
cadkernel at 4134ae3, which follows it; drop the fork patch, move the
plugin-API and web-worker crates and the Python plugin lock to the same
codec so one copy is built.
- "Import as block" with raster images left IMAGE entities without an
image definition: block definition now creates it like add_entity does,
through one shared helper.
- The three preview outlines (attach frame, clip boundary, import area)
stay f64 instead of casting world points to f32.
- Page size / total / PDF scale entries use the catalog's positional
placeholder; the bare {name} form failed to format in 20 locales.
- The Underlay Layers bulb is the SVG layer icon, not a text glyph.
- PDF dialogs use the shared dialog buttons and radios.
- Options opened from a PDF dialog clears its saved state on return.
- Paper-space underlay background reuses the model block handle already
resolved; dead `let _ = i` lines and a misplaced doc comment removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Localize block description placeholder via BlockDefinitionState field
- Add lookup mappings to locale_catalog for block definition dialog,
validation messages, on-screen prompts, and insertion units
- Add Fluent strings for all 41 keys across all 21 supported locales
Attach External Reference dialog after XATTACH / ATTACH; ATTACH routes
drawings, PDFs and images; placement prompts and messages follow the
reference (presets, Corner/XYZ, nonzero check, existing definition reuse,
missing file, self-reference); name keeps the file's case; overlay and
path type at attach; one undo step for definition and INSERT; -XREF option
prompt and `?` table; XREF opens the palette; ER alias; xref Properties
rows; dependent symbols flagged and remapped and resolved content left out
of the saved file; dialog_ok automation action; localized labels.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The bundled `opencad.python` plugin drives OCS through plugin API v7: all
43 canvas entity kinds, the drawing tables, and OCS's own commands run
step by step. RustPython stays in the plugin process — the plugin crate is
outside the workspace with its own lock file, so the application's own
dependencies are unchanged.
Reconciled with the plugin command work that landed as #1425, which the
branch was written before:
- Both added `impl Drop for PluginProcessInteractiveAdapter`, which git
merges silently into two impls that do not compile. One body now
cancels the command and then drops it from the runner, in that order: a
plugin waiting on a step has to be released before the runner forgets
the command.
- `execute_command` (#1425) and `run_command` (#1423) are both routes from
a script to the command line, and only the second was guarded. The
SCRIPTCOMMANDS switch and the denylist are shared now, so neither route
is the unguarded one.
- `run_command` dispatched with plugin dispatch still enabled, so a script
naming a plugin command re-entered the plugin that was blocked waiting
for it. It sets the suppression flag for the length of the dispatch, as
`execute_command` does.
The denylist read the command as typed, while the dispatcher resolves
aliases: a user-defined `Q` for `QUIT` (ALIASEDIT writes those) walked
past it. It resolves the alias first.
Also: the active-command comparison ran on every message, a mouse move
included, allocating two strings for names that are already `&'static
str`; SCRIPTCOMMANDS' own messages go through the translation macros; and
`docs/.DS_Store` (now ignored) and an unrelated RTF note about constraint
commands are out of the tree.
Co-Authored-By: Claude Opus 5 <[email protected]>
Implement the complete Block Definition dialog window launched via BLOCK
and BMAKE commands, featuring standard CAD layout, workflows, and entity
creation pipelines.
- Dialog UI & Layout:
- 2-column compact CAD grid with synchronized vertical heights (580 × 390px).
- Editable combobox with existing block names, invalid character validation,
and inline redefinition badge.
- Multi-line text editor widget for block descriptions (replacing single-line input).
- Quick Select (QSELECT) button integration restoring dialog state upon completion.
- Confirmation guard when attempting to redefine an existing block definition.
- Centered radio buttons, clean coordinate inputs, and accessible keyboard shortcuts.
- Base Point & On-Screen Workflow:
- BlockOnScreenCommand strictly enforces prompt sequencing: Base point is
prompted before object selection.
- Dynamically recalculates world_to_block and block_to_world affine transforms
when base point is specified on-screen, preventing stale (0,0,0) normalization.
- Supports Retain, Convert to block (INSERT placement), and Delete modes.
- Explode Enforcement:
- Guarded EXPLODE command to prevent decomposing blocks flagged as non-explodable.
- Dynamic Themed Icons:
- Added pick_point.svg, select_objects.svg, quick_select.svg, and warning_triangle.svg.
- Routed all icons through the semantic theming engine so line work (#B4B6B9)
and accents (#6DB7ED) adapt automatically to the active theme.
- Tests:
- Added unit tests for retain/convert/delete modes, redefinition, explodable flag,
on-screen base point transform recalculation, and command sequencing.
Point & line and 2Lines take a text baseline or an ellipse axis as the
line; a zero value folds the points onto the first one; 2Lines turns the
second line about its start. The Properties Constraint section edits
Constraint Form (Dynamic on the *ADSK_CONSTRAINTS layer, Annotational on
the current layer), Reference (driven constraint in parentheses whose
parameter follows the measurement) and Description (stored with the
parameter and the native variable). Dynamic dimensions keep a 12 px text
and 8 px arrows at any zoom, drop trailing zeros and show formulas as
`fx: len=d1*2`; the hidden constraints layer stays out of the layer lists.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Tables copied from other applications into the plot styles folder were
listed but refused on selection, showing as "missing" with the reason
lost on a console: the loader failed hard on a checksum or a text length
that did not add up and on any non-UTF-8 byte — and those files carry
their descriptions in Windows-1252.
- decompress_ctb reads the file as it is: a checksum or length mismatch is
reported and read past (a genuinely cut-off file is still an error), a
zlib stream with a bad trailer is retried as raw deflate, and text that
is not UTF-8 is read as Windows-1252 (pens and colours are numbers and
unaffected; other code pages only show wrong characters in descriptions).
- PlotStyleTable carries load_warnings; every load site reports them on the
command line, so a table that needed tolerance says so.
- load_named explains itself: a .stb name says named tables are not
supported yet, a .ctb missing from the folder says which folder to copy
it into (instead of "Unknown built-in plot style").
- The Plot dialog shows the reason under the Table row (style_error) —
from a selection, from a page setup that names a table, and from the
Load… picker, whose error used to be swallowed.
- A table picked with Load… from outside the plot styles folder is copied
into it (unless a file of that name is already there), so it is listed
from then on and page setups naming it resolve after a restart.
Tests: flipped checksum, text length off by one, a short payload field,
Windows-1252 descriptions, a truncated stream, .stb and missing names.
Co-Authored-By: Claude Opus 5 <[email protected]>
Delete the byte-identical 0.68 muted_style copies across 13 window modules and import crate::ui::style::common::muted_style instead. print_all keeps its local name via muted_style as muted so call sites are untouched. Divergent alphas (0.60/0.62/0.65/0.72) and missing_fonts weak.text left alone to avoid visual changes. Net: +13 / -78, no visual change. Verified: cargo check --all-targets clean, cargo test --lib ui::style (3 passed).
On Windows a plot with no printer chosen went to the PDF application's
bare "print" verb — whatever that application considered its default —
and a viewer without a "printto" verb (Edge, store readers) silently
dropped the printer the dialog had chosen. The dialog also never named the
system default, and a failed printer enumeration left only "Default" and
"PDF" with the reason written to a console nobody sees.
- The default printer is looked up by name (GetDefaultPrinterW) both for
the dialog's "System default printer (…)" entry and before every job.
- A pure route decision (plan_print_route) resolves "Default" to that
name and uses the PDF application only when it registered a "printto"
verb for .pdf (AssocQueryStringW); otherwise the job goes straight to
the spooler through the existing GDI path. The report says which:
"Sent to printer: NAME (direct print | via the PDF application)".
- list_printers reports the system's own error; the plot dialog shows it
under the printer row and the command line warns once. A desktop without
CUPS is an empty list, not an error.
- PRINTERS command: default printer, listed printers (or the error) and,
on Windows, the print route — a report to paste into an issue.
- Properties… on the Default entry opens that printer's preferences sheet.
- GDI path: the driver's dmSize is kept (its private data lives behind
it), the print raster is no longer memoised for the session, and a
spooled temporary PDF is removed.
Tests: route planning (named / blank / no default / printto or not), the
PRINTERS command; the two Windows-only GDI tests pass the resolved name.
Co-Authored-By: Claude Opus 5 <[email protected]>
Deduplicate the byte-identical 1px divider helpers previously copy-pasted across 6 modules. form::{hdivider, vseparator} is now canonical, with a form::vsep alias for legacy call sites. style_manager re-exports both so scale_manager and anno_object_scale imports keep working unchanged. Delete locals in style_manager, plotstyle, dimstyle, layout_manager, attribute_editor. Replace thin wrappers in window/plot with direct imports. no visual change.
The Options window used to commit every control the moment it was
touched, with no way back but re-editing. It now works like the Drafting
Settings window: changes still show at once (a theme, a cursor size or a
language is seen immediately), but nothing is committed until Apply or OK.
Close — and the window's × or Esc — puts everything back the way it was
when the window opened or Apply was last pressed, asking first when there
is something to lose.
The commit point is a snapshot of the persisted configuration plus the
drawing variables the 3D Modeling page edits (with the drawing's modified
flag), so every control the window has or gains is covered without being
registered; reverting re-applies the snapshot the way start-up does and
re-bakes text or regenerates solids when those settings moved.
The "unsaved changes" guard is now a shared modal helper used by both
windows.
Co-Authored-By: Claude Opus 5 <[email protected]>
- PSETUPIN / -PSETUPIN: with no arguments a file picker offers the chosen
drawing's named page setups in the Plot dialog; `PSETUPIN <file>` opens
the same chooser on that file; `PSETUPIN <file> *` or
`PSETUPIN <file> name,name` import straight away. Same-named setups are
replaced, the import is one undo step, and the report counts both.
- The Plot dialog's page-setup list gains "Import…": the chooser shows the
source drawing's setups with a tick each, All, Import and Cancel, and
selects the first imported setup afterwards. The source is read off the
UI thread with the same reader the editor uses for its own setups
(`scene::document_page_setups`), and handles that only meant something
in the source drawing (plot view, visual style) are dropped on import.
- Options → General → Plotting: "Show the page setup for new layouts"
opens the Plot / Page Setup dialog whenever a layout is created
(persisted with the plot preferences).
Tests: the document reader, the command (all / named / unknown / missing
file / undo) against a drawing saved by the app, the chooser flow, and the
new-layout option. Nine new strings in all 21 locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
Plot dialog:
- "Units" (millimetres / inches) is the page setup's own unit: the offsets
and the custom scale are shown in it, the stored ratio converts with it
so the plotted result and the paper space's unit stay the same
- "Custom: [paper] mm = [drawing] units" spells the picked scale in that
unit and accepts a typed ratio, which selects the list's name for it or
becomes a ratio entry of its own
- "Hide paperspace objects" is the page setup's plot-hidden flag; it is no
longer derived from the "Hidden Line" shade mode
- "Save changes to layout" (paper layouts, on by default) writes the dialog
into the layout when a plot is sent; previews never touch it
- offsets are labelled in the page-setup unit and kept in millimetres in
the file
System variables (typeable, through SETVAR, listed by SETVAR ?):
- PLOTOFFSET, PAPERUPDATE, PLOTROTMODE, PLOTTRANSPARENCYOVERRIDE and
BACKGROUNDPLOT live with the persisted plot preferences: the plot origin
counts from the printable corner unless PLOTOFFSET says the paper edge;
a printer that does not list the sheet either warns or switches to its
default sheet; transparency can be forced on or off; BACKGROUNDPLOT bit 1
is the dialog's background switch and bit 2 drives batch plots
- CTAB and TILEMODE read and switch the current layout
Tests cover every new control and variable; six new strings in all 21
locales; the Plot dialog grows to 940×690 for the two extra rows.
Co-Authored-By: Claude Opus 5 <[email protected]>
The Display page could only take a typed #RRGGBB, which is precise but
no way to choose a colour by eye. The swatches are now buttons that
open a wheel.
The wheel does not replace the hex field, it sits beside it: typing an
exact value stays the quickest way to reproduce a known colour. On
submit it hands a hex string to the existing ModelSpaceBgChanged and
friends rather than writing the config itself, so the two routes
cannot drift apart on validation, persistence, or the MatchTheme
fallback an empty field triggers.
Also stops the Browser shipping in the default dock layout. It was
added to the right edge, which shifted the block palette to index 1
and broke four dock tests that encode the existing arrangement. Those
tests were right and the change was wrong: the earlier commit claimed
to leave the layout alone. BROWSER now docks the panel on first use,
so nobody's edges rearrange on upgrade for a panel they never asked
for.
A docked outline of the drawing: the three origin planes, the open
sketch, and every solid labelled with the operation that made it,
recovered through primitive_property_operation. Rows run ordinary
commands, so clicking a plane starts a sketch on it and clicking a
body selects it.
It is a table of contents, not a feature tree. The DWG history records
how each solid was built but nothing re-runs it, so an earlier feature
cannot be edited to rebuild the ones after it. Presenting the list as
editable history would promise exactly that, so the panel states what
it is instead.
Off by default and opened with BROWSER, leaving the existing dock
layout alone for anyone who does not want it.
Fusion Black pairs near-black chrome with a paper-white canvas, so the
drawing is the only bright thing on screen. That breaks the assumption
in theme_canvas_background that the canvas follows the chrome, hence
the explicit lookup: falling through to the palette would paint model
space black and undo the point of the theme.
Both keep a blue accent rather than going fully greyscale. Selection
highlight defaults to the theme primary, and a white primary would be
invisible against a white canvas.
These are Theme::Custom values and so are absent from iced's
Theme::ALL. all_themes() is the list to enumerate from now; the picker
in the options dialog uses it, and parse_theme_name resolves both by
name.
The toolbar Help button was a disabled tip that could never be clicked. It now opens a modal window explaining the manager on the web build: read-only reference list, disabled Attach/Refresh/Change Path (no filesystem access or native file pickers, so no add/reload/repath and no previews), nested read-only rows, and saved-drawing requirement for relative paths.
Includes a Report-an-issue button opening the GitHub issues page and a Close button; wired as ModalKind::XrefHelp through the shared modal frame so dismissal works on native and web.
The Snap and Grid tab showed static grid values with dead checkboxes, and every grid line stroked identically.
Grid X/Y spacing and Major-line-every are now editable inputs (validated 2-100 for majors, dirty-tracked, applied with an error message on bad input); Adaptive-grid and Display-beyond-Limits checkboxes are wired to live state. Every Nth line partitions into major_segments and strokes subtly brighter (1.5x alpha, 0.75px) for the reference hierarchy. GRIDMAJOR state persists to UserSettings. Covers partition, invalidation, and parse tests.
