The guard remembered only the last announced (tab, generation), so
switching A -> B -> A announced A's load again. Each tab now carries
its own pending flag, set when a document is installed and cleared by
the boundary dispatch.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Reference-only entities (plugin API v9): a scene-scoped, in-memory
designation for plugin-owned display geometry, plus HostNotification
dispatch to native plugins so they can re-mark on DocumentOpened.
Resolves the new DeltaSnapshot site in block_editor.rs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Close the no-load-callback gap: on_notification was a dead dispatch sink —
a plugin had no way to learn that the active document changed, the selection
changed, or that a document opened, so runtime designations could not be
re-seeded after a load.
Dispatch the existing plain variants at the fingerprint-guarded boundaries
the v4 bridge already uses: DocumentChanged (the active tab's settled
geometry epoch) and SelectionChanged (the selection set) leave through
BuiltinPlugin::on_notification at the post-message boundary — after the
mutation settles and pending history scopes closed, never mid-undo or
mid-pick — and at the automation post-op boundary. Plugin-initiated writes
publish immediately after settling, like the drawing-changed event; the
boundary fingerprint guard deduplicates.
Add the additive HostNotification::DocumentOpened { tab_id } variant
(discriminant 10, the counterpart of DocumentTabClosed): fired exactly once
per whole-document install — file open, template new, system open — keyed on
a new per-tab document generation, so an edit can never repeat it and a
reload fires it once. The API version stays v9 (the bump is unreleased).
Write semantics for handlers, tested and documented: a handler may call
HostApi write methods through the same session (set_reference_only at
minimum); its write bumps the epoch, the next boundary notifies once more,
and because re-marking already-designated geometry is a documented no-op —
no epoch bump, no undo step, no publish — the loop terminates. History
(undo/redo) replay itself emits nothing; the boundary is the only channel.
No Python mapping, like the rest of this increment.
Per the upstream review of the XDATA-based storage: the host no longer writes
its own state into the saved file. The marker record under the host-owned OCS
APPID, the on-first-use APPID registration and the verbatim-EED rewrite
handling are removed; the single source of truth is a scene-scoped in-memory
set of entity handles (Scene::reference_only) that dies with the drawing tab,
so a reopened file starts undesignated and the owning plugin re-marks on the
document-opened notification.
All behaviour sites are unchanged, driven by the set: the wire stamp moves
from an XDATA read to a set lookup threaded through the tessellation
pipelines (tessellate_entity and the dimension text path take the handle set
as a plain parameter), and the pick filters, selection retains and
update/erase refusals read Scene::is_reference_only.
Undo keeps the entity-write contract: set mutations are recorded as explicit
first-touch before/after values on each history delta (the parametric-
constraints channel pattern). A designation inside a plugin push_undo scope
joins it, a scope-less change is one step of its own, an idempotent re-mark
records nothing, erasing a designated entity drops the set entry with the
entity, and undo/redo restores entity and designation together.
The round-trip test is inverted: reference_only_designation_is_not_written_
to_dwg_or_dxf now asserts the marker appears in neither format's bytes, that
no OCS APPID or marker record survives a reload, and that the designation
stays live in memory.
Open the Edit Block Definition dialog when BEDIT is invoked without an active selection, listing candidate block definitions alphabetically while filtering layout records, anonymous blocks, and external references. Allow typing a new valid block name to start an empty block editor session that only commits to the drawing block table upon explicit save.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
Viewport stacking rank kept apart from its ID in DXF; a layer's method-0
transparency reads as opaque.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The end angle subtracted a whole octant less the end offset, so the arc
in the ISOCP 9 stopped about 45 degrees short and the glyph shrank to
0.68 of the cap height; clockwise arcs and n = 0 (a full circle) drew
nothing.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Lines still showing when the pointer reaches the overlay history no
longer fade under it; leaving restarts their COMMANDLINEFADETIME.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A save records the entered model viewport (or the sheet) as the layout's
last active viewport, and opening the layout enters it again with its
UCS. Picks up the codec fix that kept a last-active link from being read
as the sheet viewport (codec d57097c, kernel b40fa59, graph 2360341).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
During in-place reference editing everything outside the working set
fades by XFADECTL. A DWF underlay's page now stays as it is, like a
raster image or a PDF page, and only its frame fades; a DGN underlay's
content keeps fading with the rest.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A reference's layer 0 and Defpoints are not dependent symbols: its
objects on them use the host's layers of those names, which are made
from the reference's only when the host has none. Before, they became
XREF|0 / XREF|Defpoints on load and XREF$0$0 on bind.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PDF dash entries are whole points in the plot's user space; on an inch
sheet a 0.1 in dash rounded to the 1-unit floor, so every short pattern
plotted as 1 in on, 1 in off.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Every weight under 0.26 mm was clamped to the screen's 1 px floor before
the PDF and SVG exporters saw it, so 0.00, 0.09, 0.13 and 0.25 mm all
plotted alike. The floor now applies on the GPU only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A selection of several unconnected chains, or one holding a closed
polyline, failed as a whole; each chain now joins on its own and the
rest stays.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The docked panel and Quick Properties render the same rows from one
state, so a picked colour opened both dropdowns and each swallowed the
other's click.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
ISOCPEUR, ISOCTEUR and the other aliased names are real fonts; with one
installed, its face draws the text instead of the stroke substitute,
which has no Cyrillic.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With TAN and CEN on, hovering a circle offered its centre everywhere on
the rim, so the tangent point from the base was never reachable.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A ten-minute time::every on wasm piles up long setTimeouts in the shared
wasmtimer driver until it stops waking every timer, which silenced the
automation channel and drop-open about 8 s after load.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
#1776 left its dialog in English outside tr-TR and added the
image_adjust automation action without re-pinning the MCP tool schema
digest, which failed tool_schema_digest_is_pinned.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A lone Alt shows a code on every ribbon tab and quick-access button.
Typing a tab code opens the tab and shows the codes of its buttons,
dropdowns, slide-outs and collapsed panels; a button code runs it, a
dropdown or slide-out code opens it and shows its item codes, Esc goes
back one level. Codes follow the reference ribbon; buttons without a
reference counterpart get none and unnamed menu items are numbered.
Codes are drawn as accent pills over the widgets that reported their
bounds in the current frame, with a hint bar under the ribbon. While
the tips are open keys go to them only. The automation gets a keytips
action and read operation.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Translate the 159 Sheet Set Manager strings still in English, using the
terms already in the file: Conjunto de planos, plano, Presentación,
espacio modelo / papel. Variables, NEWSHEETSET and file masks are untouched.
Synchronize the native parametric graph only when replay changes constraints or named parameters. Geometry and visibility history preserve existing imported network identities and ownership. Add a regression for a rejected block copy followed by local undo and redo.
