Window captures (light theme, 1400 x 860) of every sample solved on the current UI; the
thumbnails that were viewport crops are now clean ui.render images like the others; the drop
test's figure at 0.1 ms reads 129 MPa.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
examples.md and mcp.md tell the one-datum workflow and its numbers; the
crank gallery captures and Start card thumbnails are taken again on this
build; ROADMAP marks the automatic blocks of extruded cross-sections done,
and features.md's Decompose entry says what is left (3D parts).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
All six docs/media/examples images at 1400 x 860 in the light theme, the
solved sample in the home view (the crank mirror from below, as its text
says), with the wireframe symbols, no SETUP card and the crank's planes
hidden; the Start card thumbnails cropped to the model from them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crank-arm (and crank-mirror, kept as the same model under the name of
its mirror workflow) now cut the crank on its symmetry plane and the
half into seven cells: across the arm at x = 30, 60, 110 and 148, and on
two diagonals radial to the pocket's corner fillets. Every cell's
cross-section maps (four-sided blocks, the half O-grids round the bores,
triangle primitives at the pocket's corners); exact edge seeds give each
cut the same divisions on both sides, so mesh.cells merges all six cuts
and mesh.mirror reflects the half: 7 710 hex20, scaled Jacobian min 0.37
(was 0.17, and 0.009 for the swept mirrored half), edge ratio at most
7.0. Root σxx ±62.43 MPa against M/Z 62.6 MPa, the spindle carries the
1500 N. The test asserts the quality floor. Gallery images regenerated.
Fixes#247
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A Markdown table sizes its columns by the captions, so the pictures came out
at different sizes; an HTML table with a third of the width per cell keeps
them even. The crank-arm picture is scaled to 1400x860 like the others, and
flow-past (no picture yet) moves to the end.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample crank-arm: a 170 mm 6061-T6 crank built in SolidCraft
(crates/engine/samples/crank-arm.json), swept along z by mesh.hex.generate
as 7274 hex20 elements of 3 mm (scaled Jacobian min 0.17). The hex variant
drops the pocket floor fillet and boss chamfers, and its root arcs meet the
bosses 20 degrees off tangent so the arm's top face has no zero-angle cusp.
The square bore is fixed and 1500 N acts on the pedal hole; the faces are
picked by their surfaces, not their names. Its heavy test matches the root
bending stress to M/Z = 62.6 MPa within 3 % (0.3 % in practice).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
