A block topology (carved grid, butterfly and seven-block sphere templates,
O-grid, extrude, connect) projected onto a body: outer block faces onto their
smooth face groups, edges onto the curve of two targets and vertices onto the
point of three by tangent-plane iteration, nodes by transfinite interpolation,
then Winslow smoothing with the boundary on the geometry and a compass search
on the worst elements.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every tied interface between cells of one design body carries `why`: the tet cell (and why
auto fell back), the reason the body's cells did not sweep together, or the cell meshed alone
by its method; so an agent knows which cut or method to change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The swept cross-section's decomposition:
- An opening with concave corners gets a layout that continues its sides to the outer loop
(side strips and corner blocks, every corner near 90°). The thin air ring round the Pi
enclosure's square pedestal was left to the free mesher, which put a node 1e-5 from the
opening's corner: edge ratio 341,515.
- A piece's score is capped by its quadrilaterals' aspect against their longest edge or the
target size, so thin strips and pieces much smaller than the elements no longer score as
square blocks; the free mesh is scored alike for "do no harm".
- A disk is not cut into wedges round its centre (its O-grid is the scheme).
- Cuts whose pieces cannot be given division counts together (mapped pieces round a hole that
chain back to a longer side) are refused, instead of failing the whole cross-section.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The 3MF reader's name_for_index now returns a Result in zip 9, and the
geometry test writer still wrapped last_modified_time in Some. Cargo.lock
gains zip 9.0.3 beside SolidCraft's zip 3.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- last_modified_time takes DateTime directly, drop the Some() wrapper
- file_names() returns Result<Cow<str>, ZipError>: propagate errors, compare
the Cow<str>, and push the resolved name into seen
- test helper: ZipFile::name() now returns Result, unwrap it
- update the Cargo.toml comment explaining why we moved ahead of
SolidCraft (still on zip 3)
- update Cargo.lock to zip 9.0.3
Bump the zip crate from 3 to 9 in the workspace Cargo.toml and
adapt to the API change in 2.0+: last_modified_time now takes
Option<DateTime> instead of DateTime directly.
- crates/io/src/lib.rs: wrap DateTime::default() in Some(...)
- crates/geometry/src/tagged_mesh.rs: same fix in the 3MF writer
Closes#134
A partition intersects the body with a box on each side of the plane as
large as the body itself. SolidCraft's split_by_plane uses boxes several
times larger, and its boolean then put the cut up to 1.8 um off the plane
on the enclosure's air, so the cut faces were not recognized and the cells
did not close. A plane along a face of a body it cuts, or a cell whose
boundary does not tessellate into one a mesher takes (a cut through a
hole's axis), is a warning naming the partition, the body and where.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Deleting, suppressing or editing a partition (or its datum), or cutting a
meshed body, removes the meshes of the bodies that are gone, reported as
replaced, in the same undo step. model.check lists meshes of partition
cells the open design no longer has (a model saved before the cut
changed), and mesh.clear removes them, or the meshes of named bodies.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A node on the secondary surfaces of two ties (a chip's underside and its
sides, a cut face and an outer face) got one constraint per tie. When the
main nodes of one follow the other's main surface, the second constraint is
nearly the first again, and eliminating it divided by round-off: the Pi 5
heat model put 21.9 W more in than its 8 W. Such a node now follows the
main faces of all its ties together (balanced to 5e-11 of the power), a
node following a node that follows it back (a tie each way on one
interface) is an error naming both ties, and a tie row that still nearly
repeats the constraints before it is an error naming them.
mesh.cells ties one way by a fixed order of the cells (hex main to tet)
and makes one tie per tied cell, tie_<cell>, replacing the ties an earlier
run made, so its own ties never hold a node twice.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
hex_mesh_swept_cells lays out one cross-section for several cells: every
cell's walls (its cut faces included) are imprinted together, every cell's
levels are levels of all, one interval assignment and one set of layers,
and each region of each level interval is filled by the cell it lies in.
Cells meet node for node across every cut, T-junctions included.
mesh.cells sweeps the cells of each design body together first and meshes
cell by cell only what does not sweep together (saying why); the reply
gives every cell's volume, scaled Jacobian and edge ratio.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Four triangles round a point (a square cut along both diagonals) share their
free half-diagonals in pairs, so those alone cannot make every loop even when
the square's perimeter is odd; the parity repair kept raising them until the
step cap. A loop that keeps coming back now lets its coupled curves move.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
split_by_plane gives one body per side, which may hold several shells when
the side falls apart; every lump is now its own cell (B/a1, B/a2), at every
cut, as the partition docs promise.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A plan job picks the base (the newest develop commit whose push run
passed and that HEAD contains; a pull request's merge base; none for
nightly and manual runs, which run everything) and runs cargo xtask
affected. The ci job runs `cargo xtask ci --affected BASE`; heavy and
oracle run only when the change reaches the solvers, the oracle or
everything. Cancelling superseded push runs stays: the tip's run covers
everything since the last green one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
`cargo xtask affected` maps the changed files to workspace packages (by
directory from cargo metadata; files outside every package to the
packages whose sources name their top-level directory), adds every
reverse dependency, and flags everything (manifest, lock file,
toolchain, xtask, workflows), solver (the oracle's package or a package
with #[ignore]d heavy tests) and wasm (a crate the wasm check builds).
`cargo xtask ci --affected REV` runs the quick whole-tree gates, then
clippy and the tests of the affected packages, and the wasm check only
when flagged. Without the flag the gate is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The file is no longer committed: dependency pull requests from forks failed CI only because
it was out of date. The Dependabot workflow that regenerated it is gone. licences now fails
when a shipped crate names no licence and carries no licence file.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Window captures (light theme, 1400 x 860) of every sample solved on the current UI; the
thumbnails that were viewport crops are now clean ui.render images like the others; the drop
test's figure at 0.1 ms reads 129 MPa.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The drop-test and impact samples have no supports, by design, yet the browser marked Loads &
BCs as the next stage with an Add boundary condition row even after they were solved.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.export.csv's form listed only nodes and sets, so the parameter check refused the
probe's set, at, mode and frame and the reactions' about point that the command documents.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
