OneCAD-Simulation/docs/features.md

Features

Generated from the capability catalogue (crates/engine/src/catalogue.rs) by cargo run -p fieldcraft-cli -- features > docs/features.md; a test fails when it is out of date. Every entry is a toolbar button. Ready entries run their command; coming soon entries are shown greyed with the roadmap milestone that brings them (ROADMAP.md). Scripts, the command line, the control channel and AI agents over MCP (docs/mcp.md) run the same commands.

84 ready, 37 coming soon.

Geometry

Panel	Capability	Status	Command
Import	Open Design — Open a SolidCraft design: its bodies with persistent face names	ready	geometry.open
Import	Tagged Mesh — Read a face-tagged surface mesh (3MF)	ready	geometry.import.mesh
Inspect	Bodies — List the open design's bodies, volumes and named faces, edges and vertices	ready	geometry.bodies, geometry.centre, geometry.features
Inspect	Tessellate — Tessellate a body into a face-tagged boundary surface	ready	geometry.tessellate
Inspect	Check Geometry — Short edges, small and sliver faces and near faces against the element size, located	ready	geometry.check
Inspect	Check Surface — Weld, closed, manifold, orientation and self-intersection checks; feature edges	ready	mesh.surface.check
Prepare	Datum Plane — A datum plane: principal plane and offset, three points or datum points, point and normal, normal to an axis	ready	geometry.datum, (geometry.datum.edit), (geometry.datum.delete), (geometry.datum.suppress)
Prepare	Datum Axis — A datum axis: principal axis, two points or datum points, point and direction	ready	geometry.datum.axis, (geometry.datum.axis.edit)
Prepare	Datum Point — A datum point: coordinates, a mesh vertex, along an edge, a face's centre, an axis through a plane	ready	geometry.datum.point, (geometry.datum.point.edit)
Prepare	Partition — Cut bodies into cells by a datum plane; the two faces of each cut are paired by name	ready	geometry.partition, (geometry.partition.delete), (geometry.partition.suppress)
Prepare	Merge Faces — Mesh adjacent faces as one (virtual topology): a fillet in pieces, a face split by an imprint; the B-rep is unchanged	ready	geometry.faces.merge, (geometry.faces.merge.delete)
Prepare	Absorb Faces — Absorb tiny and sliver faces into a neighbour for meshing, one picked or every one Check Geometry found	ready	geometry.face.absorb
Prepare	Split Face — Split a face along a datum plane for meshing only: two faces on its surface, the cut an edge between them	ready	geometry.face.split, (geometry.face.split.delete)
Prepare	Defeature — Take small holes, fillets, chamfers and bosses out for meshing, from a proposal list with each one on or off	ready	geometry.defeature, (geometry.defeature.propose), (geometry.defeature.delete)
Prepare	Stitch — Close an imported surface's gaps under a tolerance: open points welded, T-junctions split	ready	geometry.stitch, (geometry.stitch.delete)
Prepare	Midsurface — Extract midsurfaces of thin parts for shell meshes	coming soon (M8)

Mesh

Panel	Capability	Status	Command
Size	Global Size — One element size for the whole part	coming soon (M2)
Size	Seed Edges — Element counts or sizes per design edge, with bias and an exact, minimum or free constraint; the meshers honour them	ready	mesh.seed.edge, mesh.seed.clear, mesh.seed.list
Size	Local Size — Element size on faces or bodies, in a box or in a sphere, growing away at a set rate; every mesher honours it	ready	mesh.size.set, mesh.size.growth, mesh.size.clear, mesh.size.list
Size	Curvature — Refine by curvature and proximity	coming soon (M2)
Tet	Tet Mesh — Quality tet4 or tet10 mesh of a body to a size: refined, smoothed and improved, boundary on the B-rep faces, faces tagged	ready	mesh.tet.generate
Tet	Quadratic — Second-order elements with mid-side nodes on the geometry	coming soon (M2)
Tet	Delaunay Points — Delaunay tetrahedralization of a point list (debugging aid)	ready	mesh.delaunay.points
2D	2D Mesh — Quad or triangle mesh of a planar face or polygon in the XY plane for plane stress, plane strain and axisymmetric models; edges tagged	ready	mesh.planar
Structured Hex	Quad Faces — All-quad meshes of faces on shared edge nodes	coming soon (M5)
Structured Hex	Hex Mesh — Structured hex mesh of a body: automatic, or extruded, swept, revolved or mapped (the Method drop-down)	ready	mesh.hex.generate, (mesh.hex.sweep), (mesh.hex.mapped)
Structured Hex	Partitioned Mesh — One mesh of a partitioned part, a method per cell (hex, tet, or all hex as conforming blocks); cells joined across partitions, tet cells to hex cells through conforming pyramids	ready	mesh.cells, (mesh.hex.blocks)
Structured Hex	Extrude to Surface — Hex layers from a meshed or planar section up to a curved target surface, following the side faces	ready	mesh.hex.extrude
Structured Hex	Mesh Plan — A hex-meshing plan from the features that built a body (sweeps, blocks, O-grids, layers, imprints, copies); saved, editable, applied with the structured meshers	ready	mesh.plan, mesh.plan.apply
Structured Hex	Mesh Block — A mapped block of hex, wedge or quad elements between corner points; projection blocking (a block topology projected onto the part)	ready	mesh.block, mesh.hex.project
Structured Hex	Decompose — Find sweepable and mappable regions of 3D parts (extruded cross-sections are already cut into blocks by Hex Mesh)	coming soon (M5)
Automatic Hex	Octree Hex — Unstructured all-hex mesh of any part: adaptive grid, boundary layers on every sharp edge, untangled and proven valid	ready	mesh.hex.octree
Automatic Hex	Hex-Dominant — Hex-dominant mesh by recombining tets	coming soon (M6)
Automatic Hex	Polycube — Polycube hex mesh of blocky parts	coming soon (M6)
Improve	Smooth — Smooth node positions, keeping every element valid	coming soon (M6)
Improve	Untangle — Repair inverted elements	coming soon (M6)
Improve	Layers — Boundary padding and layers through thin walls	coming soon (M6)
Improve	Relax Nodes — Relax the nodes inside a sphere to fix spikes and slivers; surface nodes slide on the geometry; kept as a field to apply again after a remesh	ready	mesh.node.relax, mesh.node.relax.apply
Edit	Node — Add a node	ready	mesh.node.add, mesh.node.remove
Edit	Element — Add an element on existing nodes	ready	mesh.element.add, mesh.element.remove, mesh.clear
Edit	Mirror Mesh — Mirror a body's mesh across a plane, joined on the plane (mesh half a symmetric part)	ready	mesh.mirror
Edit	Merge Nodes — Merge coincident nodes, keeping sets, loads and boundary conditions on the survivors; check for duplicates and cracks, renumber	ready	mesh.node.merge, mesh.check.duplicates, mesh.renumber
Edit	Remesh Region — Remesh a region in place; split and collapse elements	coming soon (M6)
Edit	Orphan Mesh — Import a mesh without geometry	coming soon (M6)
Verify	Quality — Quality metrics and the certified validity check, failing elements listed	ready	mesh.quality
Verify	Mark Bad Elements — Mark the elements below quality limits as a set, located and drawn in the marker colour	ready	mesh.quality.mark
Verify	Verify Set — Quality and validity per set	coming soon (M2)
Verify	Export STL — Write the mesh's outer surface (or a set's faces) as binary STL	ready	mesh.export.stl
Verify	Tag Geometry — Tag elements, faces, edges and nodes with the geometry they mesh	ready	mesh.tag, mesh.tag.clear

Properties

Panel	Capability	Status	Command
Materials	Material — Elastic (isotropic, orthotropic) material with density; neo-Hookean hyperelasticity for nonlinear steps	ready	model.material.create, model.material.edit, model.material.delete
Materials	Plasticity — Von Mises plasticity: bilinear, hardening table or Johnson–Cook	ready	model.material.plasticity
Materials	Hyperelastic — Hyperelastic material models	coming soon (M8)
Materials	Damage — Johnson–Cook damage and element erosion	ready	model.material.damage
Materials	Thermal — Conductivity, specific heat and expansion	coming soon (M8)
Materials	Equation of State — Polynomial, ideal gas, Mie–Grüneisen, JWL and tabulated equations of state	coming soon (M11)
Sections	Section — Solid, shell, beam, rod or 2D (plane stress, plane strain, axisymmetric) section assigned to a set, with its element formulation	ready	model.section.create, model.section.edit, model.section.delete
Sections	Composite — Composite layups and continuum shells	coming soon (M8)
Sections	Orientation — Material orientations	coming soon (M8)
Sets	Set — A set of nodes, elements and faces, or of named geometry that survives remeshing	ready	model.set.create, model.set.edit, model.set.delete, model.set.resolve
Model	Units — The model's unit system (never converted)	ready	model.units

Assembly

Panel	Capability	Status	Command
Instances	Instances — Part instances placed from SolidCraft occurrences	coming soon (M7)

Steps

Panel	Capability	Status	Command
Steps	Step — A linear or nonlinear static, frequency, heat or explicit step with its output	ready	model.step.create, model.step.edit, model.step.delete
Steps	Activate — Choose which loads and boundary conditions act in a step	ready	model.step.activate
Steps	Step Table — The step by load and boundary condition table	ready	model.activity
Procedures	Amplitude — Time and frequency amplitudes	coming soon (M7)
Procedures	Nonlinear — Nonlinear static steps	coming soon (M7)
Procedures	Explicit — Explicit dynamic steps	coming soon (M8)
Procedures	Heat Transfer — Heat transfer steps	coming soon (M8)

Loads & BCs

Panel	Capability	Status	Command
Boundary Conditions	Boundary Condition — Fixed, displacement or symmetry condition on a set or reference point	ready	model.boundary_condition.create, model.boundary_condition.edit, model.boundary_condition.delete, model.boundary_condition.symmetry
Loads	Load — Force, moment, pressure, traction, gravity or body force	ready	model.load.create, model.load.edit, model.load.delete
Flow	Fluid Domain — The box of fluid cells, its fluid, and the obstacle bodies voxelised from their face-tagged surfaces	ready	model.fluid_domain.create, model.fluid_domain.edit, model.fluid_domain.delete
Flow	Inlet & Outlet — Velocity inlets, pressure outlets, walls, moving and slip walls, periodic faces	ready	model.fluid_domain.boundary

Interactions

Panel	Capability	Status	Command
Constraints	Reference Point — A reference point for couplings, loads and boundary conditions	ready	model.reference_point.create, model.reference_point.edit, model.reference_point.delete
Constraints	Coupling — Kinematic or distributing coupling of a set to a reference point	ready	model.coupling.create, model.coupling.edit, model.coupling.delete
Constraints	Tie — Tie non-matching meshes together (dual mortar constraints)	ready	interaction.tie, interaction.tie.edit, interaction.tie.delete
Contact	General Contact — Contact between everything that may touch, or self contact of a surface, with friction (explicit dynamics and nonlinear static steps)	ready	interaction.contact.general, interaction.contact.edit, interaction.contact.delete
Contact	Contact Pair — Contact between two surfaces: with friction in explicit dynamics, mortar contact with friction in nonlinear static steps	ready	interaction.contact.pair
Contact	Find Contacts — Find the parts of the mesh that touch, and make contact pairs of them	ready	interaction.contact.find
Contact	Rigid Wall — A fixed rigid plane a set's nodes cannot pass, with friction, in an explicit dynamics step	ready	interaction.rigid_wall, interaction.rigid_wall.delete
Connectors	Bolt Load — Bolt pretension	coming soon (M7)
Connectors	Spring — Spring or dashpot to the ground or between two points, along a direction or their line	ready	model.spring.create, model.spring.edit, model.spring.delete
Connectors	Point Mass — Point mass and rotary inertia at nodes or a reference point	ready	model.mass.create, model.mass.edit, model.mass.delete
Connectors	Connector — Connector elements between points	coming soon (M7)
Coupled	FSI Interface — The fluid–structure interface	coming soon (M13)

Solve

Panel	Capability	Status	Command
Run	Solve — Solve every step in order and show the results	ready	solve.run
Check	Check Model — Name every missing or bad definition before writing or solving	ready	model.check
Decks	Abaqus Input — Write an Abaqus input file (.inp)	ready	deck.write {"format":"abaqus"}
Decks	Nastran Deck — Write Nastran bulk data (SOL 101, 103)	ready	deck.write {"format":"nastran"}
Decks	LS-DYNA Deck — Write an LS-DYNA keyword file	ready	deck.write {"format":"lsdyna"}
Decks	Read Deck — Read a deck, keeping keywords FieldCraft does not know	coming soon (M9)
Implicit	Static — Linear static (or coupled temperature–displacement) solve of a step with FieldCraft's own solver; nonlinear static, buckling and heat transfer in the drop-down	ready	solve.static, solve.nonlinear, solve.buckle, solve.heat
Implicit	Frequency — Natural frequencies and mode shapes of a frequency step	ready	solve.frequency
Explicit	Explicit — Transient dynamics of an explicit step by central differences (contact and erosion coming in M10)	ready	solve.explicit
Explicit	Blast & Impact — EOS-driven fluids with fluid–structure contact (ALE or SPH)	coming soon (M14)
Fluids	Lattice Boltzmann — Lattice Boltzmann flow of a fluid step on the CPU, with wall forces	ready	solve.fluid
Fluids	Fluid–Structure — Coupled fluid and structure solve	coming soon (M13)

Results

Panel	Capability	Status	Command
Display	Deformed — The deformed shape of a solved step, to scale	ready	results.deformed, results.clear
Display	Contours — Contours of displacement and stress, with a legend	ready	results.contour
Display	Mode Shapes — Mode shapes and frequencies of a frequency step	ready	results.modes
Display	Animate — Animate the deformed shape, a mode or an explicit step's frames	ready	results.animate, results.frame
Query	Probe — Displacement, rotation, reaction and stress at nodes, element section forces, a mode shape, or an explicit field frame (or click the model)	ready	solve.probe, solve.history
Query	Reactions — Reaction force and moment sums per set	ready	results.reactions, results.export.csv
Query	Free Body — Free-body forces across a cut	coming soon (M9)
Plots	XY Plot — Plot a quantity against the load factor, time or mode	ready	results.xy
Plots	Path Plot — Plot a quantity along a path	coming soon (M9)
Plots	Cut — Section cuts through the model	coming soon (M9)
Plots	Display Group — Show and hide parts of the model	coming soon (M9)
Plots	Streamlines — Streamlines and flow fields	coming soon (M12)
Files	Export VTU — Write a solved step as VTK unstructured grids for ParaView	ready	results.export.vtu
Files	Read Results — Read results in public formats	coming soon (M9)
Files	Convergence — Mesh convergence studies	coming soon (M9)

Tools

Panel	Capability	Status	Command
Model	Model Info — Node and element counts and the model summary	ready	model.info, model.rename
File	Open Model — Open a .fieldcraft model	ready	file.open, file.new
File	Samples — Open a sample model, ready to solve	ready	file.sample
File	Save — Save the model to its .fieldcraft file	ready	file.save
File	Save As — Save the model to a new .fieldcraft file	ready	file.save_as
File	Recover — Open a model autosaved by an app that crashed or closed with unsaved changes	ready	file.recover, file.recovery.list, file.recovery.discard
View	Show All — Show every item hidden in the viewport (hide, show and isolate items from the browser)	ready	view.show_all, (view.hide), (view.show), (view.isolate)
History	Undo — Undo the last command that changed the model	ready	edit.undo
History	Redo — Redo the command undone last	ready	edit.redo
Help	Report a Bug — Draft a GitHub bug report with the version, the OS and the last error; you review it, and nothing is sent until you submit it	ready	diagnostics.bug_report, diagnostics.crash_reports, diagnostics.crash_report, diagnostics.crash_reports.delete, diagnostics.crash_test, app.update.check