Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.
ui.at {plane} now returns the middle of the origin plane's square, or else the middle of a quarter that a click actually picks, so scripted clicks on XY no longer start a sketch on XZ from iso-like views.
apps/solidcraft-cli/tests/action_matrix.rs tries sketch, offset/angle/mid planes, press pull, extrude from a face, hole, draft, shell, fillet, chamfer, axes, points, planes, projection, move, copy, mirror and pattern on the final bodies of 104 designs (the old design files, the examples, the 76 reference recipes, the enclosure demos, the Pi case built through the UI, eight typical parts), through the commands and picks the desktop sends, each design in its own process, with an edit round on a sample of passes. tests/action_matrix/baseline.json is a ratchet: an action that passed there and fails now fails the test; newly passing ones are reported for cargo xtask action-matrix --bless. Every CI run checks a fixed sample; the nightly Action matrix job runs the whole matrix in four parts. 30,567 of 35,576 actions pass (85.9%); results and causes in docs/action-matrix.md, one ignored reproduction per open cause (#556-#568).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes#374. Feature replies gain created_bodies: the bodies the new feature made, apart from the ones it changed or that were already there. Documented in the execute tool description and docs/mcp.md.
Fixes#478. Desktop Ctrl/Cmd +/-/0 now update the saved UI scale instead of flashing back, and the Preferences scale slider applies the new layout on release (range 50-250%, matching the preference validation). Addresses the drag jitter in #272.
Fixes#527. Bodies are paired by a sort-and-sweep over their bounding boxes, and the cap moves from 200 bodies to 20,000 overlapping pairs per call (reported as truncated / skipped_pairs).
sketch.text and sketch.edit_text take an optional font: an installed family or a .ttf/.otf/.ttc file. Edit Text gets a Font field. The font is kept with the text under format 16; no fonts are bundled, and the font search is bounded.
Fixes#513
Co-Authored-By: Claude Opus 5.5 <[email protected]>
solid.move takes copy: true to keep the source bodies and transform a new copy of each, with a Create Copy box in the Move dialog. Designs without it save and load exactly as before.
Display meshes also bound the angle one facet turns, so bends and small holes on a large body are drawn round instead of as chamfers or squares. Bounded per face, and only the display mesh changes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sheet Metal Rules get a Corner Relief Shape (notch, round or rectangular), sized by the rule's corner relief, cut where two bends meet at a corner of the base. Notch, the default, keeps existing designs as they were. File format 16.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Text outlines count as drawn geometry when picking profiles, and "all profiles" leaves out the counters of letters (the holes of A, B, 8), so text extrudes as letters with their holes whether or not other curves are drawn next to it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When a body that was already cut into pieces is cut again, the new pieces are numbered past the names already taken ("Bar (2)"), instead of reusing "Bar (1)".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A SolidCraft-owned portable B-rep schema (geometry schema 2 with analytic curves and surfaces, explicit frames and ranges, fitted intersection curves) and a versioned body envelope (SCBREP03) with its own metadata records, a bounded binary codec, a validator with resource budgets, and an adapter that refuses what it can't convert exactly. Pinned by a box-and-fillet golden fixture. Not yet written by application saves. Refs #303.
When sample points say two bodies are apart or one is inside the other, the facetings are now checked for surfaces passing through each other; if they do, the boolean is computed instead of shortcut. If it still can't be intersected, the sampled answer is kept as a flagged, unverified result, and Interference lists such pairs as "could not be checked" with the reason. Fixes#442 and #443.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A hole positioned on a face now follows that face along the hole's own axis instead of sliding to the face's nearest point. When the face no longer reaches the position, the hole stays where it was placed and the feature says so.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When adjacent profiles are merged for one extrude, collinear lines on either side of where a shared boundary ended are joined back into one edge, so the body has no split faces or extra vertices for later booleans to trip on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Two line segments that lie on one another within the tolerance, a hair from parallel, no longer report a crossing somewhere along their overlap; the ends of the overlap split the edges instead. This stops booleans from leaving sub-tolerance edges or stray vertices.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Every Options row puts its control in one right-aligned column, Look At is a single label with an icon button, Options folds with a disclosure triangle, and the toggles use plain nouns (with dedicated ids for Profile and Points so they don't collide with other labels).
The Linetype buttons now read "Draw as {linetype}" with nothing selected and "Convert the selection to {linetype}" with a selection, in all four locales.
Bump the workspace to 0.7.0 and write the 0.7.0 release notes. Minor bump: the design format moved to 15 (sketches on cylinder caps and sheet metal panels), so 0.6 can't open 0.7 saves, and new features landed (Select Other, per-edge flanges, sketches on caps and sheet metal faces).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A profile traced over a face sketch's projected boundary left the extrude's caps and sides without an exact planar source, so a sketch or offset plane on the new top face was refused. The drawn curve is now the edge's source where it covers a projection. Clearer fixed-plane message; regression tests in the engine, UI harness and design corpus, plus a corpus-wide flat-face attachment check (known gaps under #491-#495).
Fixes#489
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Hold the left button still (long-press on touch) or right-click › Select Other… to list everything under the cursor: sketch points and curves ("Line 3", "Point (arc 2 centre)"), vertices, edges, faces, bodies, profiles, planes and axes, filtered like a click and by the open dialog's active input. Hovering a row lights it up; clicking selects it (Shift/Ctrl add) or feeds the dialog. A repeat click on the same spot with nothing changed selects the next thing there; a double-click keeps its own actions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Replace the 0.2.1 enclosure recording with a 40 s take of the current desktop UI building a Raspberry Pi 4 case: a sketch dimensioned with the board's parameters, extrude, fillets and shell, an M2.5 standoff patterned on the 58 x 49 mm hole rectangle, port cut-outs, floor vents, a colour, then height 24 -> 32 mm in Parameters. The demo script gains the pi story (now the default).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Profiles revolved together merge into one region that keeps a vertex where
each shared edge met the axis. With the axis edge in several pieces the loop
skipped the builders for a profile with an edge on the axis, and the generic
sweep turned each piece into a degenerate face that booleans failed on.
Runs of collinear axis lines are merged into one first.
Fixes#487
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix: name an untitled design after its file on save and open
Design tabs all read "Untitled" because a design's name only ever came
from file.new. Saving a design still under the default name now names it
after the file (bracket.solidcraft -> "bracket"), and opening a file whose
stored name is the default shows its file name. Names chosen by the user
are kept. The rename is part of the save, so it is not an undo step and
does not leave the design marked as changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
* test: expect the file's name after saving an untitled design
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
The live preview also evaluates each command as a new body, to show the tool of a join or cut
(as_new_body sets every `operation` to "new"). A combine has no new-body form: its operation is
between bodies that already exist, and solid.combine rejects "new" ("operation must be join, cut
or intersect"). That error became the preview's error even when the combine itself worked, and
since OK is greyed while the preview has an error, a combine could not be applied from its
dialog at all. as_new_body now leaves solid.combine alone, so its preview shows the result.
Co-authored-by: Claude Opus 5.5 <[email protected]>
`fit: reduce` acts only on refusals marked too large. Three kinds weren't:
the corner build's contact lines leaving their faces or running backwards,
and a curved chain's contact reaching past the end of the seam it trims. Two
more were hidden: a later edge's too-large refusal lost to an earlier edge's
other error, and the corner build's lost to the local blend's in `fillet`.
The messages are unchanged.
Refs #293
Co-authored-by: Claude Opus 5.5 <[email protected]>
Moved in by more than its radius, a round collapses and its neighbours meet
along a new edge. That edge was always built as a straight line keyed by its
ends, so on a disc whose circular edge is rounded the four arcs where the floor
meets the side became one chord used by four faces, and the shell failed with
"This shell is not oriented and closed" (#319).
The new edge now runs where the edge's face meets the face across the round
(the round's far side, crossed as a strip), through the edge's middle moved
onto both: a line or a circular arc, checked to lie on both moved faces, and
refused otherwise. Twins are the new edges with the same ends through the same
middle.
Fixes#319
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(ui): draw sketch constraint glyphs in red
Traditional CAD convention marks constraint glyphs in red. glyph_edge
and glyph_text in both themes now use red values. glyph_bg is
unchanged. The same glyph box switches to the error colour when a
constraint fails. The new reds are chosen to stay distinct from that
error colour. They are also distinct from the blue used for selection
and hover. See the pull request body for the before and after RGB
values and the contrast reasoning.
* fix(ui): match constraint toolbar icons to the red glyph colour
The CONSTRAINTS panel buttons and their drop-down rows drew their accent
strokes in the normal sketch tool green. They now use glyph_text, the same
red the matching constraint glyph box uses in the sketch view. A new
panel_accent helper in toolbar.rs picks the colour: the constraint red for
the CONSTRAINTS panel, the existing sketch green for every other sketch
tool, and the plain accent everywhere else. No other toolbar styling
changed.
* Add a one-surface fill of closed 3D loops to geom
A closed loop of curves that does not lie in a plane has no exact surface;
the usual answer is one smooth face fitted over it. fill_loop does that:
- the loop's best-fit plane (Newell normal), with a frame chosen from the
loop itself so the result does not depend on where the loop starts, its
direction, or where the part sits
- the loop seen along that normal must be simple and must not fold or run
along the normal; otherwise it is refused ("not supported yet"), never
filled with wrong geometry
- one non-rational bicubic B-spline height field over the loop's box,
fitted by least squares to the loop's samples (The NURBS Book 9.4.1,
9.4.3, eq. 9.62/9.65) with a thin-plate smoothness term
lambda*A*int(h_uu^2 + 2 h_uv^2 + h_vv^2), A one grid cell's area, so the
fit is the same at any scale; only planes are reproduced exactly
- span counts per direction (long narrow loops fit), refined until the
loop is within tolerance, else refused with the deviation reached
bspline: bisected span search, basis functions on a stack array, one
clamping helper shared by curves and surfaces, one binomial helper.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Patch fills non-planar loops of edges with one smooth face (#250)
surface.patch with edges refused any loop that is not planar ("not
supported yet: patching a loop that is not planar"). It now fills it:
- planar loops still get one exact planar face, but planarity is certified
conservatively: lines by their ends, B-spline/NURBS edges by their control
points, intersection curves by their samples lying on a support plane
within tolerance; a loop that can't be certified is filled instead
- other loops get one face from geom's fill_loop, bounded by the body's own
chained edges, whole (no split): its history is one generated face whose
edges are the body's, and it stitches back into a closed solid
- intersection-curve edges are sampled by a seeded, guarded double
projection shared by the planarity test and the fill (plane_fit)
- the face tolerance is 10x the planarity tolerance (documented: later
operations take the face to contain its edges within it)
- edge picking runs inside the guard; the geom->truck conversion is shared
with the T-spline sheets (spline_conv); the Newell plane fit is shared with
STEP import
Tests: 3- to 8-sided, concave (dart, arrow, plus), flat-corner, two-edge and
imported rims fill as one face and stitch closed (volumes against an
independent integral); finite mesh normals, same result for any pick order
or placement; non-height-field loops and too-fine detail are refused.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Test the Patch dialog filling a non-planar loop of picked edges
The Patch dialog's only test used a sketch profile. Picking the four
curved rim edges of a box cut by a sideways cylinder now makes one
surface.patch command whose result is a single smooth face over the rim.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
A sketch on a flat face of a sheet metal body was refused ("this face has no exact planar
source"), so the only way was a plane frozen in space. When the sheet changes (a flange's
angle, the thickness), the frozen sketch stays behind: a cut from it fails on the slanted
flange or leaves a blind pocket in the thicker sheet.
`sketch.create` with a face of a sheet metal body now attaches the sketch to the panel the
face belongs to. It keeps the face's name, `sheet:<body>:<panel>:<top|bottom>` (the panel is
the base or a flange's feature tag), and takes the panel's exact plane from its flat region
and fold each time the model is evaluated, so the sketch follows the sheet through parameter
changes, unfold and refold. Its coordinates are the flat pattern's (the bottom face's y
mirrored). A face that is gone is reported as a lost attachment, never replaced by the
nearest face. The attachment follows a renamed or copied body, shows as `sheet_face` in the
command result and as its own status in Redefine Sketch Plane. `fixed: true` still freezes.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Sketch on a cylinder primitive's caps (#420)
A solid.cylinder's caps carried no construction certificate, so a sketch
on its top or bottom was refused unless fixed:true (#420's crossed
cylinders, built from primitives).
- kernel: FaceSource::CylinderCap { producer, high, plane };
Body::with_cylinder_certificate turns a cylinder's two extrude caps into
certified caps. kernel::cylinder's output is unchanged for its other
callers.
- doc: FaceCertificate::CylinderCap { high }, named F<id>:top / F<id>:bottom
as the cylinder's face names already are; New Body and Join cylinders
are certified, shells carry it as their planar source.
- format 15: designs can store the new certificate kind; version 14
designs need no change, and older builds ask for an update instead of
meeting an unknown kind.
Tests: top and bottom attachments follow a height and base edit and a
reopen; crossed joined cylinders keep both caps attachable; a shelled
cylinder's floor keeps its cap identity; malformed certificate JSON is
refused.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
* Format 15 also covers sketch_axis links (#448)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Project, Intersect, Include 3D Geometry and Text resolved the active sketch's
plane without the model, so on a construction plane that is built from geometry
(perpendicular to a plane through a sketch line, through three points, midway
between two faces, tangent, along a path) they stopped with "this plane is built
from the model: evaluate first". Evaluation resolves the same plane against the
model before the sketch, in its component's frame; the sketch commands now do
the same, in one place, for adding a link, refreshing the links on an edit,
snapping a point onto an edge and the internal face profiles.
Tests: a sketch on a plane through a sloped sketch line projects a point and a
line of that sketch, follows a parameter that tilts the plane (also after reopen
and after another edit), holds text, intersects a body and includes an edge; the
same on a three-point plane and a midplane.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A left press with Ctrl (or Cmd) held, no Shift or Alt, on empty space orbits
for that press, unless the preset binds Ctrl+left itself. It only orbits
once the pointer moves: a Ctrl+click still adds to the selection, and
Ctrl+drag on sketch geometry still drags it without snapping. Works with a
tool active, without adding geometry. Ctrl+box selection from empty space
becomes the orbit; Shift+box selection still adds.
Preferences › Navigation and the UI tour mention it. Test drives every
preset through real pointer events.
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
Co-authored-by: Claude Opus 5.5 <[email protected]>
The README called the solver damped Gauss–Newton. It now places what the
constraints fix by construction (loci intersections and rigid-cluster
decomposition, after Owen 1991 and Fudos–Hoffmann 1997) and runs
Levenberg–Marquardt on the rest, with the rank of its Jacobian giving the
remaining degrees of freedom. The constraint list also gains the ones it was
missing (point on curve, curvature, point-to-line, arc sweep, arc length, slot
length), and live drags are described.
Co-authored-by: Claude Opus 5.5 <[email protected]>
With "Orbit around: Point under the cursor", a drag that starts over
empty space used to pivot on the point under the cursor at the target's
depth, so an orbit begun near the edge of the view swung the model
around an off-screen point. It now pivots on the centre of the visible
bodies and sketches (the same bounds Fit frames), or on the view centre
when nothing is visible. A drag that starts on the model is unchanged.
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
Co-authored-by: Claude Opus 5.5 <[email protected]>
* docs: add OpenGraph and Twitter card tags to the book and web app
Links to the docs site and the browser app now unfurl with a preview card.
The book gets the tags through theme/head.hbs (og:title follows the page
title); the web app's index.html carries its own, pointing at /app/. Both
use the social preview image, now served from the book at /solidcraft/og.png.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
* docs: list the social preview image in ATTRIBUTION.md
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
One edge flange feature gave all its flanges one height and one angle. A
part whose flanges lean differently took one feature per angle, and
flanges of separate features don't close toward each other, so its
corners stayed open.
- sheet.flange (edge): an entry of `edges` is a point [x, y, z] as before,
or {point, angle?, height?} whose angle and height (expressions, checked
like the feature's) replace the feature's for that edge. Bad input is
refused with the edge named. Before, the object form was read for its
point and the rest was ignored without a word.
- The feature stores its edges as FlangeEdge. An edge without values of
its own is written as the plain point it always was, so designs without
them are read and written as before; an unknown key in an edge is
refused, not dropped.
- The edges' values are feature inputs of their own (Edge angle, Edge
height, after the feature's), so parameters, renames and
parameters.change reach them. timeline.edit names the edges again when
it changes them, so each value stays with its edge.
- SheetBody::add_flanges_each trims every edge by its own setback and
adds the flanges. The corners between them close as between equal
flanges: the closing already works from the two flanges it joins (each
one's fold and leg), so the flat pattern follows by hand from the
angles, the heights and the rule (the tests derive it).
- The Flange dialog shows a row per picked edge with an angle and a
height box (empty: the dialog's value) once more than one edge is
picked, and brings them back on Edit Feature.
Co-authored-by: Claude Opus 5.5 <[email protected]>
`sketch.constraint.symmetry` (line), `parallel`, `perpendicular`,
`collinear`, `tangent` and `coincident` (point on curve) now take `x` /
`y` for the sketch's own axes, matching what `solid.revolve` means by
lowercase x|y. A real curve with that id still wins.
An axis becomes a linked construction line on it: a new
`LinkSource::SketchAxis` resolved in sketch coordinates, so it stays on
the sketch's axis on any plane, is shared by every constraint on that
axis, is left out of profiles and is reported in `created`. Equal,
concentric, midpoint and horizontal/vertical keep refusing axes, since
the axis line's finite length or fixed direction would make them
meaningless.
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
Co-authored-by: Claude Opus 5.5 <[email protected]>
selune