Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Walls swept along a spline have flat B-spline tops and bottoms, so booleans between them went to the general intersection, which fails on coincident spline faces. Such faces are now put on true planes, and two prisms of the same height and direction are decided in 2D with their spline outlines fitted by arcs within a micron. The result is kept only when its volume is plausible; otherwise the general boolean takes over. The free-form flag is cleared by a drop guard so an unwinding boolean can't leave it set.
Fixes#844.
The exact surface search could return an arbitrary parameter at a collapsed NURBS boundary, which corrupted the trimmed triangulation domain and lost volume on fine meshes of a fillet tapering to zero. Search results in the boundary projection are now validated, preferring a bounded parameter at a pole and snapping to a finite endpoint only when its transverse tangent has collapsed and the residual improves. Adds four regressions for decreasing chord tolerances, pole parameters, unbounded planar support and provisional preview.
Fixes#796.
Body::with_planar_sources compared every planar face of a result with every unsourced planar face of its inputs, so a boolean on an import with a few thousand facets ran out of its comparison budget before it started. The lists are now sorted by normal x and each face only compares with entries inside a narrow normal window found by binary search; the exact same_support test and the work budget are unchanged. Adds an engine test joining a pin onto a 4000-sided imported prism.
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests.
Part of #757.
A lip picked on a face that isn't a shelled body's rim, such as the Sample Plate's top
face with its two holes and the boss standing on it, ran its band round the largest inner
edge. That was the boss's foot, so the band stood against the boss's wall and the join
failed with a boolean error about curved faces.
The band now goes round the face's opening (an inner edge with no material just over the
face inside it). A rim face that has a smaller hole in it still works. A face whose inner
edges are only where other features stand on it, or whose openings are alike in size (a
plate's holes), is refused with a plain message that names the rim face it needs.
Fixes#892.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Generates N parts of four primitive bodies, each moved into a placed component. The test (12 parts) checks the open, the world placement and the saved round trip; the ignored bench_generated_assembly prints parse, evaluation inside and outside the features, mesh warm-up and Measure.
A boolean that cuts a pocket into the top of a cylinder (Shell does this) splits the
outer wall's straight seam edges at the pocket's floor. The wall's parameter grid has no
division along its rulings, so the triangulation fanned out from the two split vertices
to the far rims and its triangles cut through the part: the shelled Bolted Flange sample
drew and exported its rim cut off (mesh volume 29201 mm3 for a 40796 mm3 body).
Give the grid a line through each vertex that splits a boundary segment running along a
ruling, in a direction that needs no division of its own and within the grid budget.
Fixes#819.
Co-authored-by: Claude Opus 5.5 <[email protected]>
The app's control protocol gets engine.batch: the steps run in one request (so one frame), each as engine.execute runs it, stopping at the first failure and rolling back to the checkpoint by default. The MCP batch tool sends it to a running app (with the control token), is never resent after a lost reply, and falls back to step-by-step when the app refuses (agent cursor shown, or a step loads a file). A batch may take up to an hour to answer.
find_close_pair's budget now counts the grid's own work too (each cell a triangle is filed under or visits), not only the pair tests, so a pathological pair of meshes can't spend unbounded time building and walking the grid. Adds tests for find_close_pair and the budget.
face_vertices lists each vertex once per face (first-met order) and normal_near measures each distance once; seam flags, merged topology and cone signatures are unchanged because the dropped repeats were identical entries.
Hole centres from a sketch now drill into the material on whichever side of the sketch plane it lies: material the spot starts in wins, then the nearest body ahead, else against the sketch normal as before. A sketch on a part's underside or below it now drills up into the part. Covers counterbores, through-all, edge and corner centres, patterns and reopening.
Delete Face takes heal (default true, as before). With heal: false the picked faces are removed and the gap stays open, leaving the remaining faces as a surface body (kernel remove_faces); deleting every face is refused. Saved only when false, noted under format 18.
A body transfer works out the moved bodies first and puts them in place in the evaluator's own copy of the model, instead of copying every body of the model for each transfer.
Display meshes after opening, the face names read when a feature finds a face by name, and inspect.measure over all bodies are now worked out per body on plain scoped threads (solidcraft_kernel::for_each_on_threads / map_on_threads), in body order and with the same results; the browser build stays serial.
After each feature the bodies before it are indexed by name once (first match first, as the linear searches were), feature components come from a map built once per evaluation, and Body::same compares shared face sources, paint and split lines by pointer first.
Body::retained_bytes counts face and edge uses on the borrowed boundaries (the same numbers, checked by a test), and each model body keeps the footprint measured when a feature made or changed it, so the evaluation cache's budget no longer walks every body's topology after every feature.
NameCell::same now refers to its source body and takes the source's names on first request, instead of naming every face of every moved or placed body up front. Names are unchanged.
Where two boundaries of a projected face family touch at a single vertex, an even number of boundary edges meet there. The walk now stays on the face it came along (or takes the first edge in geometric order), so every loop closes; an odd count is still refused as a real branch. Adds a test with two squares meeting at a corner.
A sketch text gets an optional style: bold and italic faces (a slanted fallback for italic), left/center/right alignment, letter and line spacing, and a path curve of the same sketch for the baseline to follow (reverse takes the other side). Edit Text gets B/I toggles, alignment, spacing fields and a Path chip, all live. The style is saved only when not plain and is noted under format 18.
solidcraft --control PORT writes a random per-launch token to a user-only file (<data>/control/PORT.token; 0700/0600 on Unix, icacls on Windows; SOLIDCRAFT_CONTROL_TOKEN overrides) and refuses any connection whose first request lacks it. mcp --connect, the demo and packaging smoke clients send it. MCP execute/batch/open/save/export/screenshot are annotated destructive and open-world, new_design destructive. Docs: control-protocol.md, mcp.md, AGENTS.md, pending release note in releasing.md.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Only one run per concurrency group can wait. On a busy main each push replaced the waiting run, so the nightly and Run workflow runs on main were cancelled before they started. The group now includes the event.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Renaming a body used to replace every string in later features equal to its old name, including sketch text, plane and feature names and expressions. Now only values under keys that name bodies (body, bodies, target, targets, tools) at any depth are rewritten, with a test that a sketch text spelling the body's name stays while a move follows the rename.
Corrects the modeling skill: an edge of the face a shell removes is rounded after the shell, a slot along Y is dimensioned horizontally, long shallow arcs measure to about 0.1%, and a boolean retry warning can hide wrong geometry when the volume does not match.
A hole drilled square to a flange's panel, not only the base's, is now a flat cut-out of the sheet: it unfolds with its panel to where the bend allowance puts it, shows in the flat pattern and DXF as a circle, and survives unfold and refold. A pocket tool spans the cut-outs already inside it (a counterbore's hole), so the order they are made in no longer matters. Fixes#560.
Main has failed the full robustness goldens since #838, #839, #841, #855 and #856 landed together. Records the eleven seeds that now build differently (2, 6, 14, 22, 36, 43, 50, 63, 71, 73, 94), with a note. Shell now refusing seed 14, which used to build, is tracked in #897.
When an extrude cuts with profiles whose outlines stay more than 1 µm apart (the letters of a text), their tools are apart too, so they are joined and cut from the body in one boolean instead of one per profile. A ten-letter text cut drops from about 13 s to 1.5 s with the same result. Sheet metal targets and touching profiles keep cutting tool by tool. Tapered extrudes are unaffected.
Agent tool calls (MCP, and bridged control requests carrying allow_paths) reach files only in the open design's folder (strictly inside home or the temporary folder, not in a hidden folder, and never its hidden files), the app's recovery folder, the server's private scratch folder and each --allow-path; --allow-any-path lifts the limit. Paths are resolved first, so .. and symlinks that lead out (including a save through a link, #845) are refused. On Windows, UNC, device, NT, verbatim non-drive, drive-relative, alternate-stream, reserved-device and 8.3 short-name paths are refused before any file system call, and the resolved path must be on a local drive. doc.recovery_discard and doc.recover {discard} delete only real recovery entries. Docs: mcp.md, control-protocol.md, README.
tests/robustness/goldens.json records what each of seeds 0-95 builds: its steps, how it ended (ok, or the kind and the start of the error it was refused with) and, for the design it left, the bodies' total volume and area (within a relative 1e-6) and their face, edge and shell counts. tests::robustness_goldens fails on any change; ROBUSTNESS_GOLDENS_BLESS="why" records one, with the reason and the seeds it moved. Pull requests that touch crates/kernel run every 8th seed; pushes to main and the nightly run every seed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Bumps the workspace to 0.9.0 and writes the release notes. Minor bump: designs are now format 17, and there are many new features.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A Sketch Palette toggle (sketch.options show_construction) that hides construction geometry from drawing and picking; saved with the sketch's view options under format 17.
Co-authored-by: William Dunn <[email protected]>
Irakli Kourtis