3 people 63095fedb3 Sheet metal: a fold's fixed point on the sheet's face counts as on it (#685) (#958) ...

On a large thin sheet the probes around the fixed point stepped clean through
the sheet (twice the mesh tolerance of a 465 mm part is more than its 0.8 mm
thickness), so a point exactly on the face touched no material and the fold
was refused. The probes now also step a quarter of the thickness.

Co-authored-by: jonaswre <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>

2026-10-14 00:14:49 -04:00

..

browser.rs

Renaming a body rewrites only the references to it (#875)

2026-10-13 18:47:10 -04:00

clipboard.rs

Feature history on the left side, with contiguous folders (#449)

2026-10-13 13:01:31 -04:00

component_clone_assembly_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component_clone_assembly.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component_clone_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component_clone.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component_link.rs

feat: insert another design as a linked component (#596)

2026-10-13 06:40:58 -04:00

component_properties_tests.rs

Unstitch and Reverse Normal (#856)

2026-10-13 16:45:31 -04:00

component_properties.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component_transfer_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component_transfer.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

component.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

config_certificate_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

config_style_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

config.rs

feat: user-defined physical materials stored in the design (#532) (#606)

2026-10-13 04:47:23 -04:00

construct.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

contact_sweep_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

contact_sweep.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

delete.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

diagnostics.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

edit_tests.rs

Feature history on the left side, with contiguous folders (#449)

2026-10-13 13:01:31 -04:00

edit.rs

Feature history on the left side, with contiguous folders (#449)

2026-10-13 13:01:31 -04:00

face_tests.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625)

2026-10-13 05:26:29 -04:00

face.rs

fix(engine): pick the face of a named body where bodies meet flush (face_body) (#710)

2026-10-13 10:51:57 -04:00

features_more_tests.rs

Cut an extrude's profiles that stand apart in one boolean (#848)

2026-10-13 18:29:49 -04:00

features_more.rs

fix: a size worked out from a bare diameter keeps its unit when the design's units change (#716) (#779)

2026-10-13 12:35:25 -04:00

features.rs

Surface Revolve: sheets turned from open curves and profiles (#824)

2026-10-13 20:30:41 -04:00

file_thumbnail.rs

Add bounded portable Home thumbnails to design files (#518)

2026-10-13 05:20:47 -04:00

file.rs

Preferences › Sketch: auto-projection holds across designs (#680) (#959)

2026-10-13 23:49:51 -04:00

inspect.rs

Open large designs faster: meshes, face names and Measure on all cores (#916)

2026-10-13 19:49:04 -04:00

joints_tests.rs

fix: inspect.interference prunes by bounding-box sweep instead of refusing more than 200 bodies (#536)

2026-10-13 02:29:45 -04:00

joints.rs

fix: inspect.interference prunes by bounding-box sweep instead of refusing more than 200 bodies (#536)

2026-10-13 02:29:45 -04:00

kernel_heal_tests.rs

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

lineage_face_tests.rs

Sheet metal rims and holes, plastic features, lofts, raised pieces and merged walls take face attachments (#677)

2026-10-13 09:13:09 -04:00

materials.rs

feat: user-defined physical materials stored in the design (#532) (#606)

2026-10-13 04:47:23 -04:00

measure_sel.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

mesh.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

mod.rs

Surface toolset: icons and planned commands (#808)

2026-10-13 14:28:38 -04:00

motion_tests.rs

fix: confine MCP agents' files to allowed folders; recovery discard deletes only recovery entries (#205) (#578)

2026-10-13 18:24:08 -04:00

motion.rs

fix: confine MCP agents' files to allowed folders; recovery discard deletes only recovery entries (#205) (#578)

2026-10-13 18:24:08 -04:00

move_in_sketch_tests.rs

Make SolveApp::start honour a command's enabled flag, and disable solid.move inside a sketch (#740)

2026-10-13 11:43:45 -04:00

occurrence_tests.rs

feat: insert another design as a linked component (#596)

2026-10-13 06:40:58 -04:00

offset_edit_guard_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

offset_identity_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

offset_plane_face_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

offset_topology_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

parameters_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

parameters.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

parts.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

patterns_tests.rs

test: measure a scaling pair again when the load of other test binaries spikes (#649)

2026-10-13 09:38:28 -04:00

plastic.rs

Lip: run along the rim's opening, not the foot of a boss standing on the face (#933)

2026-10-13 20:26:24 -04:00

render.rs

Render: add backend capability discovery and strict request resolution (#650)

2026-10-13 10:17:41 -04:00

revolve_convention_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

section.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sheet_convert_tests.rs

feat: Convert to Sheet Metal takes a solid or a shelled body by its bend edges (#725)

2026-10-13 10:52:28 -04:00

sheet_tests.rs

Sheet metal: a fold's fixed point on the sheet's face counts as on it (#685) (#958)

2026-10-14 00:14:49 -04:00

sheet.rs

Sheet metal: tear as a fourth corner relief shape (#809)

2026-10-13 14:28:28 -04:00

sketch_3d_frame_tests.rs

fix: a projected edge stays the edge that was picked when its body changes (#730)

2026-10-13 12:06:13 -04:00

sketch_3d.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_axis_ref_tests.rs

Sketch: accept redundant but consistent constraints (#687) (#699)

2026-10-13 10:12:55 -04:00

sketch_canvas.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_constraints_tests.rs

Sketch: accept redundant but consistent constraints (#687) (#699)

2026-10-13 10:12:55 -04:00

sketch_constraints.rs

Sketch: accept redundant but consistent constraints (#687) (#699)

2026-10-13 10:12:55 -04:00

sketch_corner_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_create.rs

Sketch text: bold and italic, text along a curve, alignment and spacing (#852)

2026-10-13 19:27:35 -04:00

sketch_dimensioned_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_dimensioned.rs

Rounded Rectangle sketch tool (#891) (#948)

2026-10-13 23:52:10 -04:00

sketch_drag_live_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_drag.rs

Let the conic tool take a typed Rho, and preview the curve it is about to draw (#736)

2026-10-13 11:47:28 -04:00

sketch_face_tests.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625)

2026-10-13 05:26:29 -04:00

sketch_face.rs

Sheet metal rims and holes, plastic features, lofts, raised pieces and merged walls take face attachments (#677)

2026-10-13 09:13:09 -04:00

sketch_freeform.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_fuzz_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_ids_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_import.rs

Sketch text: bold and italic, text along a curve, alignment and spacing (#852)

2026-10-13 19:27:35 -04:00

sketch_inspect.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_model_plane_tests.rs

fix: sketches on planes built from the model can project, intersect, include and hold text (#459)

2026-10-12 21:27:28 -04:00

sketch_modify_tests.rs

Sketch Offset on two sides, or symmetric about the source (#807)

2026-10-13 16:29:24 -04:00

sketch_modify.rs

Sketch Offset on two sides, or symmetric about the source (#807)

2026-10-13 16:29:24 -04:00

sketch_perf_tests.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_project_edge_tests.rs

fix: a projected edge stays the edge that was picked when its body changes (#730)

2026-10-13 12:06:13 -04:00

sketch_project_side_tests.rs

fix: a dimension from linked geometry keeps its side when the source moves past it (#614)

2026-10-13 05:15:15 -04:00

sketch_project_tests.rs

Preferences › Sketch: auto-projection holds across designs (#680) (#959)

2026-10-13 23:49:51 -04:00

sketch_project.rs

fix: a projected edge stays the edge that was picked when its body changes (#730)

2026-10-13 12:06:13 -04:00

sketch_rect_tests.rs

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

sketch_redundant_tests.rs

Sketch: accept redundant but consistent constraints (#687) (#699)

2026-10-13 10:12:55 -04:00

sketch_robust_tests.rs

Sketch Trim/Extend/Offset robustness: Extend reaches splines, ellipses and conics (their polyline, then pinned on the curve); Offset refuses a distance its shape can't take (a straight piece overrun by its neighbours) instead of drawing a turned-inside-out copy; adversarial tests for trims (chords, tangent touches, lone lines, collinear overlaps, splines, ellipses, hostile points), extends and offsets (rectangles in and out, slots, splines, a spike, hostile distances), each leaving the sketch sound

2026-10-10 00:14:00 +00:00

sketch_rounded_rect_tests.rs

Rounded Rectangle sketch tool (#891) (#948)

2026-10-13 23:52:10 -04:00

sketch_support.rs

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

sketch_text_move_tests.rs

Sketch text: bold and italic, text along a curve, alignment and spacing (#852)

2026-10-13 19:27:35 -04:00

sketch_ux_tests.rs

Construction Geometries, a Sketch Palette row that hides construction geometry (#804)

2026-10-13 15:15:13 -04:00

sketch.rs

Rounded Rectangle sketch tool (#891) (#948)

2026-10-13 23:52:10 -04:00

solid_move_copy_tests.rs

Give solid.move the copy half of its Move/Copy label (#498)

2026-10-13 01:54:01 -04:00

stacked_face_tests.rs

Sketch on cut walls, chamfers, pattern copies, join-merged sides and split faces (#625)

2026-10-13 05:26:29 -04:00

surface_analysis.rs

Surface toolset: icons and planned commands (#808)

2026-10-13 14:28:38 -04:00

surface.rs

Offset Surface: faces copied out at a distance, exact or fitted (#758) (#872)

2026-10-13 22:34:16 -04:00

urdf_tests.rs

URDF export for robot simulators (#719) (#942)

2026-10-13 21:52:30 -04:00

view_navigation.rs

feat(ui): offer a cube navigator alongside signed axes (#664)

2026-10-13 09:28:52 -04:00