ByLayer swatches were always gray. The Select Color panel's Current/New
band and info line now show the colour of the layer the colour is for
(the newest selected object's layer, or the current layer for new
objects); the ribbon's colour control and the ByLayer row of its colour
dropdown show the current layer's colour.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
-BLOCK, -WBLOCK, -BEDIT, ATTSYNC, BASE and INSBASE follow the reference
prompts and messages; empty blocks; WBLOCK keeps object coordinates and
stores INSBASE; annotative and hyperlink data on the block record; block
preview images; remembered dialog choices; block aliases.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Open the Edit Block Definition dialog when BEDIT is invoked without an active selection, listing candidate block definitions alphabetically while filtering layout records, anonymous blocks, and external references. Allow typing a new valid block name to start an empty block editor session that only commits to the drawing block table upon explicit save.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
- True Color opens in RGB; the gradient field, hex and nearest index sit
at the bottom so CMYK's fourth slider doesn't move them; slider rows
closer together.
- Document tab: grid or list view (list drawn like the colour-book bars),
and Name A–Z / Z–A sorting (translated in all locales). Swatches of
colour-book colours show the colour's name.
- A colour-book colour picked as the current colour (nothing selected)
keeps its BOOK$NAME on the objects drawn with it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
A code the reference shows on two buttons runs the button whose command
the reference runs for it (VC runs Viewport Configuration), decided by
the code table's order. Labels, combo values and panel titles report
their bounds while key tips are open, and each code takes the first
spot nearest the reference place that covers none of them nor another
code; a collapsed panel's title is measured to place its code beside
the words.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Editor modes RGB, HSB and CMYK; the saturation/brightness field and hue
strip now sit below the sliders in every mode instead of being a mode.
- The panel opens on the Document tab.
- Built-in colour books: RAL CLASSIC and SIKKENS 4041 (Open Colour
Systems Collection 2.0, CC BY-ND 4.0); CSS COLORS removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013rGmDUNr1hUf4zo1X3dak8
The count line now uses the objects the selection step itself picked
(a click, a window or crossing, a lasso, a fence, Last / Previous /
All): "N found (D duplicate), M total" when some were chosen already,
"N found, R removed, M total" in remove mode, "N found, M total" when a
removal picks objects that were not chosen.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Quick-access buttons take the numbers the reference toolbar gives the
same buttons (Print 6, Undo 7, Redo 8). Codes the reference shows on two
buttons appear on both, the first in ribbon order running. Codes sit
where the reference puts them: under tab and large-button labels, on a
large dropdown's arrow strip, with their corner at the icon's centre on
icon buttons, and centred on panel titles and the corner launcher; a
button code a panel code would cover rises clear of it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The end angle subtracted a whole octant less the end offset, so the arc
in the ISOCP 9 stopped about 45 degrees short and the glyph shrank to
0.68 of the cap height; clockwise arcs and n = 0 (a full circle) drew
nothing.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Lines still showing when the pointer reaches the overlay history no
longer fade under it; leaving restarts their COMMANDLINEFADETIME.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Every pick during object selection prints the reference's count line:
"N found" for the first pick or a pick that adds nothing, "N found,
M total" after it, "N found, N removed, M total" when objects leave the
set. It is printed before a command's own filtering, so "N were filtered
out" follows it. COUNT reports through it and the ad hoc
"object(s) found." / "object(s) added to selection." lines are gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A save records the entered model viewport (or the sheet) as the layout's
last active viewport, and opening the layout enters it again with its
UCS. Picks up the codec fix that kept a last-active link from being read
as the sheet viewport (codec d57097c, kernel b40fa59, graph 2360341).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
During in-place reference editing everything outside the working set
fades by XFADECTL. A DWF underlay's page now stays as it is, like a
raster image or a PDF page, and only its frame fades; a DGN underlay's
content keeps fading with the rest.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A reference's layer 0 and Defpoints are not dependent symbols: its
objects on them use the host's layers of those names, which are made
from the reference's only when the host has none. Before, they became
XREF|0 / XREF|Defpoints on load and XREF$0$0 on bind.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PDF dash entries are whole points in the plot's user space; on an inch
sheet a 0.1 in dash rounded to the 1-unit floor, so every short pattern
plotted as 1 in on, 1 in off.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Picking nested objects reports what each pick added ("1 entity added",
"0 entities added" for an object already in the set), a pick on empty
space starts a window ("Specify opposite corner:"; a window dragged to
the right takes the objects inside it, to the left those it touches),
and a typed point picks the object it lies on. From the Reference Edit
dialog the item count is printed when the session opens, followed by
"Use REFCLOSE or the Refedit toolbar to end reference editing session."
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Every weight under 0.26 mm was clamped to the screen's 1 px floor before
the PDF and SVG exporters saw it, so 0.00, 0.09, 0.13 and 0.25 mm all
plotted alike. The floor now applies on the GPU only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A selection of several unconnected chains, or one holding a closed
polyline, failed as a whole; each chain now joins on its own and the
rest stays.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The docked panel and Quick Properties render the same rows from one
state, so a picked colour opened both dropdowns and each swallowed the
other's click.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
ISOCPEUR, ISOCTEUR and the other aliased names are real fonts; with one
installed, its face draws the text instead of the stroke substitute,
which has no Cyrillic.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With TAN and CEN on, hovering a circle offered its centre everywhere on
the rim, so the tangent point from the base was never reachable.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A ten-minute time::every on wasm piles up long setTimeouts in the shared
wasmtimer driver until it stops waking every timer, which silenced the
automation channel and drop-open about 8 s after load.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
#1776 left its dialog in English outside tr-TR and added the
image_adjust automation action without re-pinning the MCP tool schema
digest, which failed tool_schema_digest_is_pinned.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A lone Alt shows a code on every ribbon tab and quick-access button.
Typing a tab code opens the tab and shows the codes of its buttons,
dropdowns, slide-outs and collapsed panels; a button code runs it, a
dropdown or slide-out code opens it and shows its item codes, Esc goes
back one level. Codes follow the reference ribbon; buttons without a
reference counterpart get none and unnamed menu items are numbered.
Codes are drawn as accent pills over the widgets that reported their
bounds in the current frame, with a hint bar under the ribbon. While
the tips are open keys go to them only. The automation gets a keytips
action and read operation.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Synchronize the native parametric graph only when replay changes constraints or named parameters. Geometry and visibility history preserve existing imported network identities and ownership. Add a regression for a rejected block copy followed by local undo and redo.
ramox81