The readout learned to write lengths as 5'-6 1/2" and angles as
N 45d0'0" E, but typed input was still a bare parse::<f64>() — a
coordinate could be displayed and not entered. Give the formatters
their inverses.
parse_length takes feet and inches separated by a dash, a space, or
nothing, with the closing quote optional, and whole-plus-fraction in
any of those forms: 5', 60", 5'-9", 5'9-1/2, 9-1/2, 1/2. A leading
minus is a sign; the one inside 5'-9" is a separator, since after feet
there is nothing left to subtract from.
parse_angle reads the mark that says which convention an angle is in —
g for grads, r for radians, d/'/" for degrees-minutes-seconds, compass
letters for a surveyor's bearing — and reads a bare number in whichever
convention the drawing is set to.
ANGBASE and ANGDIR now apply, but only where they mean something. Which
way a thing points is measured from the drawing's zero and runs the way
it says; how wide an arc opens is the same number whatever zero is
counted from. format_direction and parse_direction are the pair for
directions, and the polar readout and polar input both go through them,
so the bearing shown is the bearing accepted. format_angle stays for
sizes, where applying a base angle would corrupt the value.
The command prompts follow the same rule, each classified rather than
swept: OFFSET distance, FILLET radius, CHAMFER distances, ARRAY and
MINSERT spacing, TRACE width, HELIX, and EXTRUDE height read lengths;
the four dimension text-rotation prompts, ARRAY's total angle and
INSERT's rotation read angles. MLINE's scale and INSERT's scale factor
are left alone — a multiplier has no unit to be written in. INSERT read
both through one parse; they are now separate.
The typed variants also take a decimal comma, which a single-value
prompt has no other use for. parse_length itself does not: inside a
coordinate the comma separates the axes.
Co-Authored-By: Claude Opus 5 <[email protected]>
Two places still showed the old mark after the logo was redrawn.
The window icon was built by drawing the letterforms stroke by stroke in
code, background colour and all, which made it the one icon in the
application not coming from assets/logo.svg. It now rasterises that file,
fitted to the square without distorting whatever aspect the logo has. It
returns nothing when the logo cannot be rendered, so the window falls back
to the platform default instead of to something invented here -- which is
how it ended up stale in the first place.
The icon installed into the icon theme was only ever written from inside
the desktop-entry write, behind that write's own "nothing changed" early
return. The entry's text does not change when the logo does, so once it
had been written the icon was never refreshed again. The two change for
different reasons; the icon is now checked first and on its own terms. It
already compares bytes, so an unchanged logo still costs only a read.
Worth knowing on Wayland: the compositor ignores the window icon entirely
and takes the dock icon from the desktop entry, so there the installed
theme file is the only one that matters -- and it refreshes when the file
associations are next set up, not at launch.
Co-Authored-By: Claude Opus 5 <[email protected]>
Selecting a proxy object we render from its cached graphics (an AEC
Wall/Door/Window and the like) showed "Unknown" as its type. The entity
now carries its real DXF class name from the CLASSES section (acadrust
bump), so surface it: ui_name_or_class title-cases the class ("AEC_WALL"
→ "Aec Wall") for the properties Type row and the status-bar label, and
still says "Unknown" only when the class truly can't be named.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Holding Shift while a command asks for a point captures the nearest
polar increment (or ortho axis, UCS-aware) from the rubber-band base
toward the cursor and pins the pick to that ray. Every candidate —
osnap hits included — projects onto the locked direction, so a snap far
off-axis contributes only its along-axis component; the click commits
exactly what the preview shows. The direction stays fixed while Shift
is held and drops the moment it releases. Grip drags get the same lock
from the grip origin.
Guards: engages only when the active command wants a point — never
during entity picks (Shift there is the TRIM/EXTEND swap), tangent
picks, selection gathering or window-corner picks.
Closes#312
Co-Authored-By: Claude Fable 5 <[email protected]>
Section marks and drawing-view borders are now real acadrust entity
types instead of Unknown-with-extras, so the renderer dispatches on the
variant directly, the arrow-direction resolver reads the active viewport
off the ViewBorder entity, and selection / properties show "Section
Symbol" and "View Border" instead of "Unknown". View borders are
non-plotting and tessellate to nothing; both count toward the lossy
Save-As warning since they round-trip via their raw records.
Bumps acadrust for the entity promotion.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Lights, camera views and the geographic-location marker had no on-screen
representation. Add display glyphs for all three:
- Lights render through a new EntityType::Light: a cone/flashlight for spot
lights, a wire sphere for point lights, a sun for distant lights, sized in
screen space (fixed-world fallback).
- Camera views (perspective VIEW records) and the GEODATA "daisy" marker are
synthesized into the model-space resident wire set from the document, since
they are not entities.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Typed values were quantized to the f32 grid before reaching the
entity (e.g. a length of 2000.8 committed as 2000.8020), worsening
with magnitude. The interaction point layer was all glam::Vec3 (f32).
Two-layer fix:
1. Coordinate backbone -> f64. last_point, last_cursor_world,
dyn_anchor, dyn_ref become DVec3; UcsXform transforms, parse_coord,
the ucs helper fns, dyn_resolve_point, the OTRACK typed-distance
paths, command-line coordinate entry and the coordinate readout all
compute in f64. Screen/GPU/alignment stays f32 (snap engine, render
geometry, projection, UCS-icon/viewcube drawing) with casts only at
those boundaries.
2. Per-command committed storage -> DVec3. on_point already received a
DVec3, but many command impls narrowed it back to f32 (let pt =
pt.as_vec3(); Vec<Vec3> fields) and re-widened at build, quantizing
the committed coordinate. Migrated PLINE, SPLINE, MLINE, LENGTHEN,
INSERT, 3D primitives, every dimension/leader/mleader, ray, revcloud,
wipeout, attdef, table, tolerance, array center, mview, plot_window,
plus the QDIM_PLACE handler and qdim_collect_points. Preview,
hit-test and rubber-band paths keep f32 at the boundary.
Hatch manual boundaries are left for a follow-up: HatchModel.boundary
is structurally Arc<Vec<[f32;2]>> and needs a model-level widen.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
COPYCLIP/CUTCLIP used the mean of each entity's bounding-box centre as the
paste anchor. Standard clipboard behaviour puts the lower-left corner of the
box enclosing all copied items under the cursor. Union each entity's bbox min
corner instead, and rename clipboard_centroid -> clipboard_base (COPYBASE also
stores a picked point there, so "centroid" was inaccurate).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
COPYCLIP/CUTCLIP computed the clipboard anchor by tessellating every
selected entity and averaging all wire vertices — O(total geometry),
~250 ms when copying a whole drawing. The anchor only fixes which point
of the selection sits under the cursor at paste, so the mean of each
entity's bounding-box centre is an equally valid, far cheaper origin.
Pull in this session's acadrust work — the HELIX / ACAD_TABLE read+write,
underlay reader/writer/definition, spline tolerances & tangents, etc. The new
EntityType::Helix variant breaks three exhaustive matches; add its arm to
entity_type_name, the UI-name / DXF-name maps and entity_type_key.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
entities_centroid summed the f32 points (double-single HIGH half) alone, so
at UTM scale (~5.7e6) it both quantized each term ~0.5 m and lost low bits
across the running total — drifting the paste base and PASTEBLOCK's block
base metres off, which placed the wrapped block at the wrong spot/scale.
It now reconstructs each vertex's absolute f64 from points + points_low and
accumulates in f64. clipboard_centroid is DVec3; the PASTECLIP commit delta
is fully f64; define_block_from_owned_entities takes an f64 base so the
block-local fold (Translate(-base)) stays precise. The interactive ghost
anchors (PasteCommand, InsertBlockCommand) still take the f32 cast — display
only; the committed geometry is f64.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Route the remaining absolute-coordinate CPU projection through the
relative-to-eye path so it no longer multiplies by a view_proj matrix
carrying a ~1e7 translation (which cancels catastrophically in f32 after
world_offset removal):
- camera pick_on_plane / pick_on_target_plane delegate to
unproject_on_plane_f64 (rotation-only inverse + f64 eye)
- snapper (world_to_screen), hit_test (click_hit / mesh / hatch), the
scene mesh/solid hit methods, grid + UCS axes, and polar_constrain_near
all take view_rot + eye and project relative-to-eye
- compute_grid_step measures the per-unit scale via the rotation-only
matrix (no eye term needed)
view_proj remains only for conservative CPU frustum-cull / scissor and the
screen-space viewcube / UCS-icon directions. NOTE: SnapResult.world and
the command-point chain are still Vec3 (f32) — a ~0.5 m quantization at
extreme UTM zoom remains; the command layer goes f64 next.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
OTRACK alignment rays (0°/90° and polar steps, plus the polar pencil from
the last point) were built along world X/Y. They now rotate with the
active UCS via a Mat4 passed into otrack_snap (scene.viewcube_ucs_mat() —
the UCS in model space, identity in paper), so tracking lines and the
intersection lock align to the user's coordinate system like ortho,
polar, and the grid. sync_ucs_to_scene now reuses UcsXform::rotation_mat.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The on-canvas dynamic-input boxes measured relative X/Y deltas and the
polar angle in world axes. They now read in the active UCS plane (via
UcsXform::vec_to_ucs on the offset-invariant delta), matching the UCS
ortho/polar constraints and coordinate readout. Identity UCS reproduces
the world-frame values; absolute first-point fields are unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Ortho and polar drawing constraints snapped to world X/Y; under an active
UCS they now snap to the UCS axes, routed through the shared UcsXform
(identity = unchanged world-XY behaviour). Applied at all three input
sites (grip drag, command point, command preview). Typed coordinates
already flow through the converter via ucs_to_wcs / ucs_rotate_vec.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Introduce one bridge between WCS (how geometry and the file are stored)
and the active UCS (the coordinate system the user works in), so every
UCS-aware system routes through it instead of re-deriving axis math.
- UcsXform (app/helpers.rs): the converter — to_wcs/to_ucs (points),
vec_to_wcs/vec_to_ucs (directions), axes(), is_identity(). Orthonormal
axes, so the inverse is the transpose. The old ucs_to_wcs / ucs_rotate_vec
free fns now delegate to it (one implementation).
- DocumentTab::ucs_xform() builds it from the tab's active_ucs (None = WCS).
- DocumentTab::adopt_active_ucs_from_header() loads the document's saved
current UCS (header model-space UCS) into active_ucs on open, so the file's
coordinate system is live immediately; called from both load paths.
- Status-bar coordinate readout reports the cursor in the active UCS.
- UCS icon tripod projects the active UCS axes, so it rotates to the UCS
instead of always showing world X/Y/Z.
First slice of routing the app's coordinate systems through the converter;
input/picking, grid, ViewCube, and the remaining readouts follow.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Gate target-specific code so neither build warns about the other's items:
native-only helpers (view, window icon, file dialogs, file association, plugin
host/guard/registry, self-update) are cfg'd to non-wasm; the wasm-only font
fallback (script_of / cjk_lang / request) is cfg'd to wasm. Drop an unused mut,
allow the few genuinely-conditional dead items (mesh_click_hit, GPU layout
helpers, parity stubs), and gate the embedded PlotSettings-unrelated dead
constants. Both targets now build clean (only the unavoidable nom/quick-xml
future-incompat dependency notice remains).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Turn the ribbon Clipboard "Paste" button into a dropdown:
- Paste — existing pick-a-point paste.
- Paste to Original Coordinates — drops the clipboard at its source
coordinates with no prompt.
- Paste as Block — wraps the clipboard contents in a new block definition
and starts an interactive insert (prompts for the drop point, with the
geometry rubber-banding under the cursor).
Also fixes two bugs the new commands exposed:
- entities_centroid summed the NaN separator points wire models carry,
so the paste base point came out NaN; non-finite points are now
skipped. A NaN base previously froze block tessellation outright.
- PASTEORIG added clipboard entities with their original handles
(duplicates on same-document paste); it now goes through
add_entity_clone and merges referenced records like the other pastes.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
ACAD_SURFACE entities now load and render. Their NURBS faces are
tessellated by building a truck BSplineSurface from the ACIS `spline-surface`
control net and knot vectors, then sampling its parametric grid — reusing the
same NURBS kernel the Model tab already builds on. Analytic faces
(plane/cone/sphere/torus) continue through the existing tessellator.
- New spline_tess.rs: parse the ACIS `nubs` block (degrees, knots with the
clamped end-multiplicity fix, control grid) into a truck BSplineSurface and
mesh it.
- tessellate_surface + Surface wired through the mesh-build, fallback-wire,
and entity-classification paths.
- Bump acadrust to the commit that adds the Surface entity.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
POLAR locked the cursor to the nearest angle everywhere, so it could
never point between angles. Snap only when the cursor is within the snap
aperture (in screen pixels) of a polar ray; otherwise leave it free, so
POLAR behaves as if off when pointing away from every angle. The polar
guide line now shows only while actually snapped.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Phase 4.1. Handle / u64 keys dominate the hot maps (block_defn,
hatch / image / mesh caches, draw-depth map, viewport wire caches);
the default SipHash is wasted work on integer keys. Alias the std
types to rustc_hash::FxHashMap / FxHashSet crate-wide so every map and
set — including the cross-module draw-depth map shared between scene
and the GPU pipelines — uses the faster hasher consistently.
Mechanical: no behavioural change. Constructors moved from ::new() to
::default() (Fx variants carry no RandomState). Build + 13 tests green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Koordinat girişi artık göreli/mutlak ayrımını destekliyor:
- `@x,y[,z]` → son girilen noktaya göreli (UCS eksenlerinde döndürülür)
- `#x,y[,z]` → her zaman mutlak (DYN durumundan bağımsız)
- ön ek yok → DYN açıksa göreli, kapalıysa mutlak
İlk noktada referans olmadığından göreli giriş mutlağa düşer. Çözülen
WCS noktası last_point olarak saklanıyor, böylece ardışık göreli
girişler zincirleniyor.
parse_coord artık (Vec3, CoordKind) döndürüyor; relative offset için
ucs_rotate_vec eklendi (origin translation olmadan UCS rotasyonu).
UCS ORIGIN komutu prefix'i yok sayıp mutlak kalıyor.
Ayrıca ViewCube snap refactor'undan kalan kullanılmayan kod temizlendi:
angle_close, active_viewport_yaw_pitch, CubeRegion::snap_angles.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Two near-identical match-on-EntityType tables lived far apart:
scene/properties.rs::entity_type_name returned mixed-case UI labels;
app/commands.rs::entity_type_name returned uppercase DXF record names.
Both enumerated ~30 variants; adding a new entity meant remembering to
touch two files in two crates' worth of source layout.
Move both into a single entities/names.rs as `ui_name()` and
`dxf_name()`. Adjacent so a new variant gets both labels added at once;
function names make the intended audience explicit at the callsite.
scene/properties.rs and app/commands.rs each lose their local match
plus one re-export, gaining a `crate::entities::names::*` call.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Joining the OpenAEC Foundation (open-aec.com). Crate/struct become
OpenCADStudio, user-facing strings use the spaced "Open CAD Studio"
form, repo URLs point to HakanSeven12/open-cad-studio. Logo (window
icon + assets/logo.svg) redrawn with OCS initials. Drop examples/
binaries — unused.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
* helpers::wcs_to_ucs — UCS inverse transform with zero call sites.
* scene::Scene::compute_and_set_world_offset — never called; the load
path uses the free function `compute_world_offset` directly.
* tessellate::tessellate_mesh — never called; mesh tessellation goes
through `solid3d_tess`, not the truck Shell/Solid path.
* truck_tess::tess_to_mesh_model — orphaned with tessellate_mesh's
removal.
* MeshModel::WHITE / MeshModel::SELECTED — only used by the removed
tessellate_mesh.
* xattach::Step::FilePath variant — never constructed; XATTACH always
enters through `with_path` after the file picker. Replaced the Step
enum + prefilled_path field with flat `path` / `block_name` fields
and dropped the unreachable text-input flow.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Make scene::properties::entity_type_name the single source of truth.
entity_type_label in helpers.rs now delegates to it instead of
maintaining a separate match list.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
The Properties panel header was still showing "Entity" for unrecognized
types because helpers.rs had its own incomplete match. Both functions now
enumerate every acadrust EntityType variant explicitly.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Add `active_ucs: Option<Ucs>` per-tab state to DocumentTab
- Add `ucs_to_wcs`, `wcs_to_ucs`, `ucs_z_axis`, `ucs_rotated_z` helpers
- Add `Camera::pick_on_plane` for ray–plane intersection against any plane
- Mouse picks project onto the active UCS XY plane instead of world XY
- Typed coordinates are converted from UCS space to WCS before dispatch
- UCS command now really activates/deactivates a UCS:
- `UCS W` resets to WCS (clears active_ucs)
- `UCS <name>` activates a named UCS
- `UCS SAVE <name>` saves the current active UCS
- `UCS ORIGIN x,y,z` shifts origin (in current UCS space)
- `UCS X/Y/Z <angle>` rotates the UCS around its own axes
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
