The Properties palette reads the layer names when it is built, and a
layer rename only refreshed the layer panel and the ribbon, so the
palette's layer list kept the old name beside the new one. The layer
panel refresh now rebuilds the palette whenever the set of layer names
changed: rename, new, delete and purge all pass through it. A layer
toggle that leaves the names alone does not rebuild it, as the rebuild is
costly for a large selection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Idle and object selection drew the same cursor, crosshair arms with the
pickbox, so the cursor did not tell a pick from a free move. While a
command gathers a selection or waits for an object pick the arms now go
and the pickbox stays: idle keeps arms and box, point input arms and dot.
Fixes#1661
Co-Authored-By: Claude Opus 5.5 <[email protected]>
On a non-Retina screen macOS draws the interface at 1x, which reads small
on a Full HD monitor, and there was no way to enlarge it. Options >
Display now offers an interface scale of 75–200 % in 25 % steps, applied
through the window's scale factor on top of the display's own and kept
with the user settings. It is a list rather than a slider because the
dialog rescales under the pointer as the value changes.
Fixes#1655
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PURGE repeats until a pass removes nothing. A drawing whose complex
linetypes use shape files carries unnamed STYLE records for them; the
table holds those under keys the empty name does not reach, so every pass
listed them again and removed nothing, and the loop never ended.
- Unnamed and shape-file styles, and styles a complex linetype reaches by
handle, are never listed for purging.
- In-use checks compare names case-insensitively, as the tables do, so a
layer, style or linetype referenced as WALL is not purged as Wall.
- Counts are what the tables actually removed, and a pass that removes
nothing ends the loop.
Fixes#1662
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Add Section 19 benchmarks covering camera pan viewport uniform updates,
spatial hover candidate search, and viewport data assembly scaling
- Add navigation telemetry probes in src/perf.rs (active only when
PERF=1) to track frame interval, batched input moves, and layout-draw gap
Outside macOS a touchpad's two-finger drag arrives as wheel scrolls that
nothing tells from a wheel. A new option (Options, off by default) makes
every scroll pan and Ctrl+scroll — what a pinch sends there — zoom.
Fixes#1560
Co-Authored-By: Claude Opus 5.5 <[email protected]>
select takes window [x1, y1, x2, y2] in world XY, with crossing to also
take what the box crosses. It runs the viewport's own box test, now one
helper (box_selection_handles) that the drag and click-move-click
gestures share; the drag gesture applies the selection filter as the
click one already did.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The paste kernel added every entity to model space. It now takes the
space a new entity goes to: the block being edited, a layout's paper
space when no viewport is active, or model space.
Fixes#1652
Co-Authored-By: Claude Opus 5.5 <[email protected]>
LayerTransparencyEdit applied without begin/commit_layer_undo, so the edit was permanent while every sibling arm is undoable. Mirrors the color arm inside the non-empty guard. Test: layer_transparency_edit_pushes_undo asserts the entry plus undo-restores (RED first). Full suite: 1991 passed / 0 failed / 25 ignored.
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
grips lists the selection's grips; grip_drag moves one to a world point
through the viewport's own grip gesture with snaps, ortho and polar off;
click presses the left button where a world point shows, optionally with
Ctrl and/or Shift held.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The no-selection panel showed only the AC code. It now reads e.g.
"AC1032 (2018+)", from the version the file was opened as.
Discussion #1442
Co-Authored-By: Claude Opus 5.5 <[email protected]>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DsSetHandle for the first arrowhead also overwrote the second, destroying split-arrowhead configurations. The second write was a drive-by from overhaul 25515fa3; the Dimsah toggle has its own null-guarded init. Test: dimblk1_pick_leaves_dimblk2_alone pins per-end independence (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
It stamps sheet set data, which the web build does not have; the wasm
check failed once #1627 split it out of prepare_native_save.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sweep history records in the reference layout.
Pins resolved to upstream: codec bff95f5 (#93, #94, #95, #96, #97 and
review fixes), kernel 6146d31 (#75 and review fixes), graph 9635ba7.
- UPDATEFIELD stays the command main already had (Select objects, undo,
locale strings); it now takes the PR's reach — a block reference's
attributes and block definition, a table's cell texts — and reports
the fields that really changed. The PR's second implementation and its
duplicate registration are gone.
- FIELDEVAL's range error goes through the locale catalog.
- Field boxes: no slicing inside a character, one layout per multi-line
attribute, and TEXT boxes scale about the annotative reference point
like the glyphs do. Comment and indentation put back where they belong.
- bump_text_hosts classifies every host in one pass over the drawing
instead of scanning all layouts and blocks per host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A point or pick step commits on the press, so the cursor drifting before
the button comes up no longer moves it. Selection steps and drag-fence
picks still wait for the release.
The press runs the existing release path once; the command path clears
left_down, so the real release that follows does nothing. This replaces
the PR's moved click block and press_consumed_point flag, which could
stay set when the release landed outside the viewport and swallow the
next release, and which broke TRIM's press-and-drag fence.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A blank script line outside a command repeats the last command through
dispatch_command, as the command line's empty Enter does.
- ZOOMFACTOR bound docs describe the SETVAR range the PR widened, and the
test keeps checking the value the Options field reaches.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Dynamic-input fields take ' and " and read 2'9" / 3' as lengths (#937)
- STRETCH on a selection made by a crossing window stretches through that
window and goes straight to the base point (#1068)
- STRETCH's crossing-window steps show no coordinate boxes (#657)
- Collapsed ribbon panel titles wrap at words, never mid-word (#920)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
New sweep records store the source and placed profile frames, the
default mitred joint, groups 292-294 and a 3D polyline path as a wire
body, so the reference re-evaluates them. Builds against the sweep
history codec and kernel revisions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
