The Properties palette reads the layer names when it is built, and a
layer rename only refreshed the layer panel and the ribbon, so the
palette's layer list kept the old name beside the new one. The layer
panel refresh now rebuilds the palette whenever the set of layer names
changed: rename, new, delete and purge all pass through it. A layer
toggle that leaves the names alone does not rebuild it, as the rebuild is
costly for a large selection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Idle and object selection drew the same cursor, crosshair arms with the
pickbox, so the cursor did not tell a pick from a free move. While a
command gathers a selection or waits for an object pick the arms now go
and the pickbox stays: idle keeps arms and box, point input arms and dot.
Fixes#1661
Co-Authored-By: Claude Opus 5.5 <[email protected]>
On a non-Retina screen macOS draws the interface at 1x, which reads small
on a Full HD monitor, and there was no way to enlarge it. Options >
Display now offers an interface scale of 75–200 % in 25 % steps, applied
through the window's scale factor on top of the display's own and kept
with the user settings. It is a list rather than a slider because the
dialog rescales under the pointer as the value changes.
Fixes#1655
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PURGE repeats until a pass removes nothing. A drawing whose complex
linetypes use shape files carries unnamed STYLE records for them; the
table holds those under keys the empty name does not reach, so every pass
listed them again and removed nothing, and the loop never ended.
- Unnamed and shape-file styles, and styles a complex linetype reaches by
handle, are never listed for purging.
- In-use checks compare names case-insensitively, as the tables do, so a
layer, style or linetype referenced as WALL is not purged as Wall.
- Counts are what the tables actually removed, and a pass that removes
nothing ends the loop.
Fixes#1662
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Add Section 19 benchmarks covering camera pan viewport uniform updates,
spatial hover candidate search, and viewport data assembly scaling
- Add navigation telemetry probes in src/perf.rs (active only when
PERF=1) to track frame interval, batched input moves, and layout-draw gap
underlay_resolution_stale() was requesting continuous redraw frames at
display refresh rate even when no raster underlays were present in the
drawing. Cache has_underlays conservatively on Scene and early-return
false when no underlays exist, eliminating the idle tick leak.
- Language gains lo-LA, labelled ລາວ in every catalog, so the new
translation can be chosen.
- Two Lao keys under stale names now use the catalog's names, and the
touchpad option added since gets its Lao label.
- The web build gets a Lao font (Noto Sans Lao, generated like Thai) and
routes Lao and Thai drawing text to their fonts; Thai had a font but
was never routed to it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Outside macOS a touchpad's two-finger drag arrives as wheel scrolls that
nothing tells from a wheel. A new option (Options, off by default) makes
every scroll pan and Ctrl+scroll — what a pinch sends there — zoom.
Fixes#1560
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DWG layout owners and the overall paper-space viewport read back as
written (opencadcodec#78, opencadcodec#80).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
select takes window [x1, y1, x2, y2] in world XY, with crossing to also
take what the box crosses. It runs the viewport's own box test, now one
helper (box_selection_handles) that the drag and click-move-click
gestures share; the drag gesture applies the selection filter as the
click one already did.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The closed combo is at least 250 px wide (about 25 characters of name)
and its dropdown 300 px.
Fixes#1648
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The text was placed by its alignment rather than its attachment point,
so text on the left of the landing ran over the leader. It now attaches
by the attachment point, and putting the text on a side (on creation or
by a grip) turns left- or right-justified text to read away from the
leader.
Fixes#1646
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Circle and ellipse shaders scaled the pattern length by the linetype
scale (PSLTSCALE in a viewport, annotation scale in model) but not the
dash and gap elements, so a dashed arc broke into dots.
Fixes#1644
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The paste kernel added every entity to model space. It now takes the
space a new entity goes to: the block being edited, a layout's paper
space when no viewport is active, or model space.
Fixes#1652
Co-Authored-By: Claude Opus 5.5 <[email protected]>
LayerTransparencyEdit applied without begin/commit_layer_undo, so the edit was permanent while every sibling arm is undoable. Mirrors the color arm inside the non-empty guard. Test: layer_transparency_edit_pushes_undo asserts the entry plus undo-restores (RED first). Full suite: 1991 passed / 0 failed / 25 ignored.
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- An open path is swept from its end nearest the pick point (in plan), as
the reference does; the record keeps the original path and the placed
frame marks the start.
- Kernel from ramox81/cadkernel 1df75f5: one face per path run for
twisted, scaled and spline sweeps, placed records swept from the placed
end, end caps without pcurves.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
grips lists the selection's grips; grip_drag moves one to a world point
through the viewport's own grip gesture with snaps, ortho and polar off;
click presses the left button where a world point shows, optionally with
Ctrl and/or Shift held.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Before a grip is picked, the crosshair now jumps to the grip under it, so
the click lands where the marker shows.
Discussion #1557
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The no-selection panel showed only the AC code. It now reads e.g.
"AC1032 (2018+)", from the version the file was opened as.
Discussion #1442
Co-Authored-By: Claude Opus 5.5 <[email protected]>
