flatten_plan 2,289 -> 1,098-1,144 us (-50..-52%); flatten_scene_apply 1,213 -> 789-813 us (-33..-35% vs baseline; -28.5% same-session O2-vs-O1, drift-corrected).
Pre-sizes collect/plan vectors and adds Scene::update_entities so FLATTEN issues one geometry bump per batch instead of per entity; single update_entity keeps its exact bump-per-call semantics.
Moves the flatten projection fns and command helpers into modules/draw/modify/flatten.rs (behavior unchanged) and adds flatten_plan / flatten_scene_apply to the COMMANDS suite.
- Insert > Reference: the PDF Attach button becomes an Attach Underlay menu
(PDF / DWF / DGN); its face runs the last one chosen.
- DWFATTACH, DGNATTACH and ATTACH on a .dwf/.dwfx/.dgn open the Attach
dialog for that kind: sheets or models with thumbnails (one chosen),
placement, path type, file details with the sheet / model size, and for
DGN the conversion units (sub units offer 1 / sub units per master as the
scale).
- DGN V8 true colours come from the ExtendedColors record packed in the
non-model attributes stream; the colour word's high part numbers them.
- A DGN model's extent includes each text's box (its length along the
baseline and 1.5 x its height), as the reference sizes a model.
- DWFx text uses the family named in its embedded (deobfuscated) font.
- DWF contrast pivots at 0.73 once colours are turned over for a dark
background.
- Hairline strokes are drawn solid one pixel wide, and underlay rasters are
made at or below their size on screen so those lines stay unbroken.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- PDFOSNAP, DWFOSNAP and DGNOSNAP are separate; UOSNAP sets them all and
reads 2 while they differ. Enable Snap switches the selected kind's.
- DWFCLIP / DGNCLIP clip their own kind with the kind's prompts and message;
CLIP routes DWF and DGN underlays there; Enter at a corner asks again.
- The right-edge underlay tools show for DWF and DGN too (import is PDF
only).
- Underlay layers: DGN levels (V8 level table, "Default" listed as "0"; V7
used levels named from the level name table), hidden through the layer
override data with the DGN placeholder string first; a plotted DWF has
none.
- V8 colour read from its colour word (by level, index, or a true colour
drawn as its nearest index); 3D V8 elements drawn in plan (lines, line
strings, ellipses and arcs by their orientation, text); a model's extent
includes its text.
- DWF 6 TrueType text (font, height, rotation from the font opcode) and DWFx
glyph runs are drawn; the default W2D colour map is the measured one.
- Contrast pulls lightness towards a per-kind pivot as measured (PDF 0.5,
DWF 0.243, DGN 0.65).
- Zoom extents includes raster images and underlays whose frames are hidden.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Frames: follow the drawing state, DWF/DGN frames, image frame profile, frame-only picking
The codec [patch] to ramox81/cadcodec@ea5edaa is dropped: that commit landed as opencadcodec#63 and main already pins ad16215, which contains it.
DWFATTACH / -DWFATTACH and DGNATTACH / -DGNATTACH attach a DWF / DWFx sheet
or a DGN (V7 or V8) model with the reference's prompts; ATTACH routes the
file types to them. The sheet or model is read into vector paths, drawn as a
transparent underlay raster (contrast, fade, monochrome and background
adjustment apply) and offers its geometry to object snaps. Definitions are
kept in ACAD_DWFDEFINITIONS / ACAD_DGNDEFINITIONS, the External References
palette lists and reloads them, and image textures get line-keeping mip
levels so thin underlay lines stay visible when zoomed out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
An image's transparency flag decides whether transparent pixels show what
is behind the image or draw in their stored colour: the image pass and PDF
plots now follow it (it was ignored, so every PNG alpha showed through).
TRANSPARENCY selects images and asks for the mode, defaulting to the first
image's current one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The Frames list shows the drawing's frame state (hide / display and plot /
display but not plot / frames vary), follows commands, undo and document
switches, and lists the mixed state as a disabled item.
- DWFFRAME and DGNFRAME are frame variables of their own, kept in the header,
and FRAME sets them with the others.
- Out-of-range frame values say "Requires an integer between 0 and 2." and
ask again; a set value reports "Regenerating model.".
- IMAGEFRAME is stored in the image variables as bits (2 is written as 3) and
a drawing without them uses the profile value, which setting IMAGEFRAME
updates and the settings file keeps.
- Raster images, PDF underlays and wipeouts are picked on their frame only;
underlay snap geometry is never picked.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Shares the benchmark harness between both suites, extracts the plan/batch/apply helpers out of the EXPLODE command arm, and adds the command_benchmarks target.
The branch added by #1498 repeated finish_dispatch's focus and dynamic-input sync; call it instead.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When a plugin command was dispatched, record_recent was called but
tabs[i].last_cmd was never set. Consequently, pressing Enter or Space on
an empty command line after running a plugin command failed to repeat it.
This records tabs[i].last_cmd on plugin dispatch and requests command-line
focus and dynamic input syncing when an interactive plugin command starts.
The PDF Underlay and External Reference ribbon tabs are gone. While only
PDF underlays are selected their tools (Display in Monochrome, Create
Clipping Boundary, Remove Clipping, Show Underlay, Enable Snap, External
References, Edit Layers, Import As Objects) sit on the right-edge toolbar,
the switches drawn as on while on; while only xrefs are selected the xref
tools do. Contrast and fade stay in Properties. Toolbar tooltips are
translated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- PDFIMPORTIMAGEPATH names the image extraction folder: relative to the
PDF's folder (default "PDF Images"), absolute as given, "." for none.
- Every import of the session gets the next prefix (PDF_, PDF2_, PDF3_ ...),
also when the same file is imported again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Shown and brought forward while only xrefs are selected: Edit Reference
In-Place, Open Reference, Create Clipping Boundary, Remove Clipping and
External References.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- CLIP continues as IMAGECLIP on a raster image and as VPCLIP on a layout
viewport, with the reference prompts and stored data.
- Image clip boundaries sit on pixel centres, OFF only clears the display
flag, and an inverted boundary cuts the image.
- VPCLIP polygon (Arc/Length/Close/Undo), clipping object and Delete; the
viewport shrinks to the boundary's exact extents, view kept.
- XCLIP Clipdepth: Remove clears only the plane asked, a front plane behind
the back one is rejected with the reference message.
- Attached and imported images carry the reference display flags.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Unlayered raster images go with the PDF layer drawn last before them.
- Circular Bezier arcs import as arcs: bulged polyline segments with Join,
ARC entities without it; straight chains still join.
- Imported PNGs go to "PDF Images" next to the PDF; import blocks are
numbered imp31, imp32, ...
- Background darkness is its HSL lightness below one half.
- All chosen pages attach at the same insertion point.
- PDF geometry snaps as separate pieces: centre from the rim, intersections
and perpendiculars.
- Automation: snap query with an optional base point.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The command driver was split into command_driver/ upstream; the PDF
underlay and XCLIP additions to the old file move with it: their
CmdResult arms into the router (mod.rs) and the block-reference
selection filter with its clip lookup into utilities.rs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Publishes app-free domain logic for shared use: match_special_props and PolylineMatchStyle move to entities::match_props; xdict trio usable headlessly; new match_layer, copy_to_clipboard, paste_entities and match_properties kernels over CadDocument. Handlers stay thin shells keeping undo, dirty flags, selection and command-line echo.
Adds cross-document copy, paste and property-match tests plus a headless proof driving copy, paste and match with no app instance.
- `XREF <args>` runs whole: probing the bare verb first now opens the
External References palette, which refreshed every entry and toggled
the palette before `XREF Reload A` / `XREF ?` ran.
- Update the two tests that encoded the old behaviour: `-XREF ?` prints
the reference table, and attaching a missing file is rejected.
- Drop the duplicate "Specify On-screen" catalog entry that shadowed the
translated common key, with its unused ftl keys.
- Move `remove_pipe_symbols`' doc comment back above its function.
- Note in `document_for_save` that resolved xref content stays out.
- Gate the desktop-only preview cap and tab index for wasm.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The reference follows the cursor while its insertion point, scale or
rotation is asked (preview-only PScale/PX/PY/PZ/PRotate included); a
relative path chosen before the drawing had a file becomes relative on the
first save, and relative paths start from "./" at or below the drawing's
folder; -XREF name options report "No matching xref names found.".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Attach External Reference dialog after XATTACH / ATTACH; ATTACH routes
drawings, PDFs and images; placement prompts and messages follow the
reference (presets, Corner/XYZ, nonzero check, existing definition reuse,
missing file, self-reference); name keeps the file's case; overlay and
path type at attach; one undo step for definition and INSERT; -XREF option
prompt and `?` table; XREF opens the palette; ER alias; xref Properties
rows; dependent symbols flagged and remapped and resolved content left out
of the saved file; dialog_ok automation action; localized labels.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The 2Lines placement (#1459) wrote the second line's new ends back with
`set_resolved_point`, which was not the inverse of the `resolve_point` it
paired with. `resolve_point` reads polyline vertices in WCS through the
polyline's OCS; the writer put that world point straight into the OCS
vertex, so a mirrored polyline (normal -Z, common in real drawings) had
its vertex flipped, and the closing segment's end marker — which names
vertex 0 on a closed polyline — found no vertex and the placement was
silently dropped. The writer now converts back into the OCS, keeps the
polyline's own elevation, and wraps the closing marker the same way.
The same arm pushed `test_pline_line_then_arc` past the default test
thread's stack: its locals, a cloned entity among them, sat in the frame
of the command-result dispatcher, which is on the stack of every click.
The placement is built out of line and handed over boxed.
Merging #1447 had left nothing setting DIMCONSTRAINT's default to
Diameter; the Dispatch arm #1461 turned into a match now covers it with
Radius and Convert. DCCONVERT's result lines go through the translation
macros.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The command deleted the dimension and left a literal constraint behind. The
reference keeps the dimension, drives it with a new parameter and gathers
only associative dimensions, saying how many objects it dropped.
Co-Authored-By: Claude Opus 5 <[email protected]>
The bundled `opencad.python` plugin drives OCS through plugin API v7: all
43 canvas entity kinds, the drawing tables, and OCS's own commands run
step by step. RustPython stays in the plugin process — the plugin crate is
outside the workspace with its own lock file, so the application's own
dependencies are unchanged.
Reconciled with the plugin command work that landed as #1425, which the
branch was written before:
- Both added `impl Drop for PluginProcessInteractiveAdapter`, which git
merges silently into two impls that do not compile. One body now
cancels the command and then drops it from the runner, in that order: a
plugin waiting on a step has to be released before the runner forgets
the command.
- `execute_command` (#1425) and `run_command` (#1423) are both routes from
a script to the command line, and only the second was guarded. The
SCRIPTCOMMANDS switch and the denylist are shared now, so neither route
is the unguarded one.
- `run_command` dispatched with plugin dispatch still enabled, so a script
naming a plugin command re-entered the plugin that was blocked waiting
for it. It sets the suppression flag for the length of the dispatch, as
`execute_command` does.
The denylist read the command as typed, while the dispatcher resolves
aliases: a user-defined `Q` for `QUIT` (ALIASEDIT writes those) walked
past it. It resolves the alias first.
Also: the active-command comparison ran on every message, a mouse move
included, allocating two strings for names that are already `&'static
str`; SCRIPTCOMMANDS' own messages go through the translation macros; and
`docs/.DS_Store` (now ignored) and an unrelated RTF note about constraint
commands are out of the tree.
Co-Authored-By: Claude Opus 5 <[email protected]>
Implement the complete Block Definition dialog window launched via BLOCK
and BMAKE commands, featuring standard CAD layout, workflows, and entity
creation pipelines.
- Dialog UI & Layout:
- 2-column compact CAD grid with synchronized vertical heights (580 × 390px).
- Editable combobox with existing block names, invalid character validation,
and inline redefinition badge.
- Multi-line text editor widget for block descriptions (replacing single-line input).
- Quick Select (QSELECT) button integration restoring dialog state upon completion.
- Confirmation guard when attempting to redefine an existing block definition.
- Centered radio buttons, clean coordinate inputs, and accessible keyboard shortcuts.
- Base Point & On-Screen Workflow:
- BlockOnScreenCommand strictly enforces prompt sequencing: Base point is
prompted before object selection.
- Dynamically recalculates world_to_block and block_to_world affine transforms
when base point is specified on-screen, preventing stale (0,0,0) normalization.
- Supports Retain, Convert to block (INSERT placement), and Delete modes.
- Explode Enforcement:
- Guarded EXPLODE command to prevent decomposing blocks flagged as non-explodable.
- Dynamic Themed Icons:
- Added pick_point.svg, select_objects.svg, quick_select.svg, and warning_triangle.svg.
- Routed all icons through the semantic theming engine so line work (#B4B6B9)
and accents (#6DB7ED) adapt automatically to the active theme.
- Tests:
- Added unit tests for retain/convert/delete modes, redefinition, explodable flag,
on-screen base point transform recalculation, and command sequencing.
#1447 branched from the same commit as #1443 and rewrote the radial
dimensional constraint a second time, so the two designs had to be
reconciled rather than stacked. #1447's is the one kept: it covers
DCRADIUS and DCDIAMETER through one command, places the dimension by the
direction the location was picked in rather than storing a text point,
and names the parameters `radN` / `diaN`. #1443's radial command result,
its entity builder call and its follow-up code are gone; its own
independent work stays — the ribbon's small-button grid and tool
descriptions, the magnitude reading of a negative radius, and the centre
anchor a parameter edit resizes a circle about.
The DIMCONSTRAINT default follows #1443: running DCRADIUS or DCDIAMETER
directly leaves it alone, and the Dispatch arm sets it when DIMCONSTRAINT
is what asked for the command.
The second commit's radial drawing — the dimension line broken around the
text, the elbowed leader, the centre-mark and arrowhead rules — applied to
every radius and diameter dimension, not just a constraint's, and three
layout-parity tests said the old layout was the measured one. It is now
scoped to a dimensional constraint's own dimension, as #1443 scoped its
version, and ordinary radial dimensions draw as they did.
Co-Authored-By: Claude Opus 5 <[email protected]>
The commands ask for the circle or arc themselves, report the measured
size, take a dimension line location and then the value or name and
value, creating a radius or diameter dimension as the constraint's
dynamic dimension with a radN/diaN parameter, refusing a second radial
constraint on the same object and any non-positive value.
Co-Authored-By: Claude Opus 5 <[email protected]>
`bool::then_some` evaluates its argument eagerly, so starting SHELL or
SOLIDEDIT with nothing selected indexed an empty vector and aborted the
application. The single-solid target now comes from a slice match.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Direct distance entry (#1429) turned every bare number at a point prompt
into a distance, so ROTATE's angle and the values automation types were
read as coordinates. The step reads the token first now — `feed_command`
reports whether it claimed it — and only an unclaimed one becomes a
distance. That also puts the token back on the unified step driver, which
owns the P / L selection keywords and the dimension-snap bookkeeping, and
stops `on_text_input` running twice for the same token. A tracking ray
carries its own base, so it no longer demands an anchor that the first
point of a command does not have yet.
Plugin command execution (#1425) re-implemented the command line inside
the plugin host: it dispatched families directly, skipping the teardown
that starts a command (grip edits, selection gestures, `last_point`, the
accepted snaps), and made every `CmdResult::Dispatch` in the application
skip plugin dispatch to avoid its own re-entrancy. A scripted line now
runs through `run_command_line`, with the trailing Enter left off while
the plugin streams the command, and the re-entrancy is handled by a flag
set for the length of the plugin's call. A pause parks the line's Enter
with the rest of its tokens instead of dropping it.
A font reference (#1432) tried the family lookup before the face-file
index, and that lookup ends in a prefix match a longer file name loses to
(`ISOCPEUI.TTF` would take `ISOCP`). The exact file answers first.
Co-Authored-By: Claude Opus 5 <[email protected]>
Karim Jerbi