Opening (File > Open, a drop, the recent list) a design that has none of the
bodies the model's mesh and sets are on now asks, like the unsaved-changes
prompt: Start a new model with this design (default, Enter), Keep the
current model (the status names what no longer resolves), or Cancel. The
opened session waits for the answer; the same design opens without asking.
ui.inspect shows the prompt as {"design": path}; ui.prompt answers it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Opening a design over a model kept its mesh and every definition silently,
even when the design was another part (#145, #114). geometry.open now takes
`model`: "keep" (default: same-design reopen keeps the mesh and sets that
follow persistent face names) or "new" (clears mesh, definitions and
imported surfaces, keeps the unit system). The reply says whether the design
is `related` to the model's geometry references and lists `stale` mesh
bodies and sets. One undo step either way.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
While result contours are shown, the hovered item's face fill is left out
and only its outline, edges and nodes are drawn, so the hover never hides
the colours under the pointer. Picker::hover is the hover's own overlay.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A Markdown table sizes its columns by the captions, so the pictures came out
at different sizes; an HTML table with a third of the width per cell keeps
them even. The crank-arm picture is scaled to 1400x860 like the others, and
flow-past (no picture yet) moves to the end.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
cargo-deb and cargo-generate-rpm (pinned) package the same stripped binaries and files as the
tar.gz under /usr. The release job compares the file lists, runs lintian, and installs both
packages in Ubuntu 22.04 and Fedora containers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The heavy test asked the upright's top to grow within 2 % of free thermal
expansion; the clamped bore holds it back by 2.1 % on the Linux CI's tet mesh,
which differs from macOS's (#115). 3 % still catches a wrong expansion
coefficient or temperature.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Plane strain, plane stress and axisymmetric models take contact pairs and
general (self) contact on the linear edges of tri3 and quad4 elements:
edges oriented out of their elements, the edge mortar of fem with the
thickness or 2 pi r in the weights, the element's area over the edge's
length as the thickness under it, and the in-plane rows of the tangent
blocks. Verified by the contact patch test in plane strain and
axisymmetric (to 1e-9 small sliding, 1e-4 finite), Hertz's line contact
on quad4 edges (Johnson 1985, 4.3; equal to the hex8 model's to 1e-5),
and a hybrid rubber C-ring closing on itself that moves node for node as
the one-layer solid ring.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
One constant pressure per element (mean dilatation, Nagtegaal, Parks &
Rice 1974; the hoop strain in the divergence) for quad4, quad8 and tri6:
the linear stiffness, stresses and thermal load, and the finite- and
small-strain forms of nonlinear steps with their consistent tangent. The
linear triangle and plane stress are refused by name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Segment-to-segment overlap of two edges projected along the secondary
normal (Yang, Laursen & Meng 2005), three-point Gauss-Legendre with the
out-of-plane measure (thickness or 2 pi r) in the weight, over the same
Real scalars as faces so the solver gets exact derivatives.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample crank-arm: a 170 mm 6061-T6 crank built in SolidCraft
(crates/engine/samples/crank-arm.json), swept along z by mesh.hex.generate
as 7274 hex20 elements of 3 mm (scaled Jacobian min 0.17). The hex variant
drops the pocket floor fillet and boss chamfers, and its root arcs meet the
bosses 20 degrees off tangent so the arm's top face has no zero-angle cusp.
The square bore is fixed and 1500 N acts on the pedal hole; the faces are
picked by their surfaces, not their names. Its heavy test matches the root
bending stress to M/Z = 62.6 MPa within 3 % (0.3 % in practice).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An Examples section before Build: a tile per sample with its picture, one
line and its name for File > Samples or fieldcraft --sample NAME, linking
docs/examples.md; the roadmap notes the gallery.
Closes#167
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample bracket-hex: the corpus bracket split into 30 SolidCraft cells,
meshed by mesh.hex.blocks as one conforming hex20 mesh of 3 mm, clamped at
the upright and loaded at the foot. The sample's script finds the clamp and
load faces in every cell that has them. Its test matches the tip deflection
of a fine tet10 solution within 1 % and checks the clamp carries the load.
Closes#166
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample heated-bracket: the corpus filleted bracket in steel, tet10, its
hole bores clamped, the upright's end held at 120 C and the rest cooled by
still air; one coupled temperature-displacement step. Its test checks the
temperatures against the heater and the air, then warms the bracket evenly,
clamps one hole, and matches the free thermal expansion alpha dT times the
distance from the hole along x.
Closes#165
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample flow-past: air at 25 mm/s past the upright L-bracket in a box of
2.5 mm lattice cells (Re 83), inlet, outlet, a no-slip floor and slip walls;
the fluid step reports the force on each named face. Its test holds the
drag coefficient on the upright's frontal area between 1 and 3.5 (2.3) and
the lattice's mass change under 1 %. No picture: the viewport does not draw
flow results yet (M12).
Part of #164 (its streamlines wait for a flow display in the viewport)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample rubber-seal: a gasket ring of hybrid hex8 elements in four
mapped quarter blocks, squeezed 2.5 mm between plates bonded to it
(nonlinear static, Mooney-Rivlin rubber). Its test frees the plates and
matches the closed form for incompressible uniaxial compression within 3 %,
and bounds the bonded ring's extra stiffness. The plates are prescribed
displacements until implicit contact (#161) can press it into a groove.
Closes#163
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample drop-test: an L-bracket standing on its foot (a SolidCraft script
in sample.rs) swept into hex8, falling 2 m onto a rigid floor tilted 15 deg;
explicit dynamics for 1 ms with gravity and plasticity. Its test checks the
mass against rho V, the impact speed sqrt(2 g h) and kinetic energy, the
energy balance and the momentum the floor takes. docs/examples.md starts
with it, and its picture is docs/media/examples/drop-test.png.
Closes#162
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A sample may carry a SolidCraft script (the corpus recipe form) whose design
opens before its commands run, and its script sees the design's bodies.
fieldcraft-engine now builds fieldcraft-geometry with its scripts feature.
The start screen scrolls its sample list, and a test keeps the file.sample
form's choices in step with the samples.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
General contact, on a set's faces or every exterior face of the solids, is mortar contact
with one face list as both sides: each face against every other one that faces it, shares no
node with its element and is not reached through more than half an element, paired both
ways. Tested by a nearly incompressible Mooney-Rivlin C-ring (hybrid hex8) closing on itself
(no penetration beyond the mortar's weak enforcement, mirror symmetry to 1e-6) and, heavy, a
rubber bellows whose folds press on each other.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An oracle case of uniaxial tension across a tie of non-matching meshes; the tie formulation
in docs/fem.md and the literature survey; ROADMAP M7 and parity updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Each secondary node follows the main surface under it as the weighted average
u_A = sum_J (M_AJ / sum_K M_AK) u_J with M_AJ = int psi_A N_J over the reference overlaps and
psi the secondary faces' dual shape functions (Wohlmuth 2000), so the secondary mortar
matrix is diagonal; the rows join the couplings' constraint elimination in every implicit
analysis. Uncovered secondary nodes stay free with a warning; heat transfer and explicit
dynamics refuse ties by name. Tested by the tie patch test on non-matching hex8/tet4 meshes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A tie names a main and a secondary face set and an optional position tolerance; it refers to
its sets, round-trips, is bounded in number and checked for solid faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An oracle case of a block pressed on another and slid with static and kinetic coefficients
(mu_k N carried once slipping), and the docs of the friction formulation; ROADMAP M7 and
parity updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
solve.nonlinear counts the slipping nodes, solve.probe gives a secondary node's shear traction
and slip, and the results display draws contact_shear and contact_slip, contact_status coding
stick and slip.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A return map at the closed secondary nodes on the mortar slip in its rate form (w_A = B_A dx,
B_A = [int Phi_A N_i P, -int Phi_A N_j P]): stick within mu p_A, slip back to the cone, static
coefficient for a node that stuck in the last increment and kinetic for one that slipped; the
friction does the virtual work t . B_A dx, so a slipping interface carries mu N exactly. The
tangent is symmetrised (stick and slip stiffness kept, the coupling to the pressure and the
change of B left out; the residual is exact). Tractions and slip states are committed with the
converged increment. After a chattering cutback, nodes open by less than 1e-3 of their
element's thickness keep their penalty in the tangent for the rest of the step. Results carry
the shear traction, the slip and stick/slip status.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Two oracle cases: the contact patch test on non-matching meshes in small and finite sliding,
and Hertz's cylinder on a flat under force control (peak pressure, pressure distribution,
subsurface stress). docs/fem.md describes the formulation, the literature survey its papers;
ROADMAP M7 and parity are updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
solve.nonlinear summarises each contact (normal force, largest pressure, closed nodes, deepest
penetration, augmentations), solve.probe gives a secondary node's pressure, gap and status per
contact, and the results display draws contact_pressure, contact_gap and contact_status. The
contact commands, the catalogue and the model docs say what nonlinear static steps do with a
pair.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Frictionless contact pairs enforced by an augmented Lagrangian: nodal pressures from the
mortar weighted gaps, Uzawa updates after each converged increment until the gaps are within
1e-5 of the element thickness, and the consistent tangent (outer products of the weighted
gap gradients and the pressure-weighted Hessians from the automatic differentiation of the
mortar integrals). Finite sliding searches and integrates on the current configuration every
evaluation; without nonlinear geometry the pairs and their mortar integrals are fixed in the
reference configuration (small sliding, linear and exact). The tangent's pattern takes the
face pairs' blocks; the step cuts back when the active set chatters. Initial overclosure is
offset or refused; general contact, 2D models and arc length are refused by name; the linear
analyses refuse contact by name instead of the mesh.
With contact the convergence force scale comes from the converged states, the loads and the
current state. The loads-and-reactions balance check takes the nodal reactions into its scale
(no spurious warning for a part squeezed between held faces).
Tests: the contact patch test on non-matching hex8/tet4 meshes (exact with small sliding,
to 1e-4 with finite sliding), Hertz cylinder on a flat (peak pressure within 3%, half-width
bracketed) with quadratic Newton convergence, overclosure, thread-count determinism and the
refusals; Hertz sphere on a flat (heavy).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The overlap of a secondary face with a main face (projection onto the secondary plane,
Sutherland-Hodgman clipping of their triangles, Radon's seven-point rule on the overlap's
fan) and the inverse linear and bilinear maps of both faces, written over a Real scalar so
that f64, Dual (gradient) and Hyper (gradient and packed Hessian, 24 variables) give the
values and the exact linearisation of the segmentation, the normal and the projection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An explicit step may ask for mass scaling to a target time increment (on
a set, or the whole model): elements whose stable increment is below it
get the density that reaches it, with their lumped masses, frequency
bound and hourglass scales; adiabatic heating keeps the physical
density. The run reports the elements scaled, the added mass in all and
per section with its fraction, a warning, and the added mass's kinetic
energy in the energy account. Verified on a uniform bar scaled to twice
its increment (added mass 3×, increment doubled, a quarter of the
kinetic energy left to the physical mass). ROADMAP and parity note the
hyperelastic materials and mass scaling.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Neo-Hookean, Mooney–Rivlin and Yeoh materials in explicit dynamics, in
total form from the deformation gradient (objective by construction):
the one-point hex8 takes its mean F over the undeformed element and the
stress τ/J; tet4 takes the isochoric stress of its own F with the
average nodal pressure of the decoupled volumetric energy (Bonet–Burton
at finite strain). Each element's frequency bound follows the tangent's
largest normal stiffness. Small-displacement steps and thermal strain of
hyperelastic elements are refused by name.
Verified by uniaxial strain to λ = 1.5 of all three laws on hex8 and
tet4 against the material point (to rounding), and the oracle case
explicit-neo-hookean-implicit: a quasi-static explicit pull against the
implicit nonlinear solver (lateral contraction to 0.09%, stress to 0.03%).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Its values come from abaqus-docs.mit.edu, which returns 403 Forbidden outside MIT's network, so
they are not from a publicly accessible source. The section is kept aside for review.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A README section tabulates, per benchmark, the reference, the result the
Abaqus 2017 Benchmarks Guide publishes (element, mesh, error) and ours from
the oracle, with a cited source per value and notes where the rows are not
like for like. Linked from docs/verification.md.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
arc-shallow-arch: a sinusoidal arch of 40 × 2 × 1 hex20 under a sinusoidal dead load scaled to
the one-mode closed form's upper limit load: the upper limit point at 0.992 (−0.8 %), the lower
at 0.219 (0.8 % of the peak load) and exactly one negative eigenvalue between them. ROADMAP and
parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
NonlinearStatic.arc_length {constraint, max_load_factor, displacement_limit}: Riks–Crisfield
arc-length increments (cylindrical or spherical arc, tangent predictor signed by the angle
criterion, the constraint's quadratic root chosen by the angle with the last iterate), arcs
grown, shrunk and cut back as increments are. The converged state's tangent is factored for the
next predictor (LDLᵀ when indefinite); its negative eigenvalues are recorded per increment and
changes in their count are reported as limit or bifurcation points. Ends at the maximum load
factor, a displacement limit or the increment cap. Abaqus *STATIC, RIKS; LS-DYNA refuses it by
name; forms gain the arc-length group. A shallow arch of hex20 snaps through on the closed-form
path (1.9 %), both limit points found, inertia 0 → 1 → 0 between them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Fixes the build of develop: #171 crossed with the typed command forms, so BUCKLE lacked its
form. SOLVE_BUCKLE follows SOLVE_FREQUENCY; the step form gains the buckle variant and the
nonlinear step's imperfection group.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
NonlinearStatic.imperfection {step, mode, scale}: the buckling step's mode, scaled to a largest
component of `scale`, is added to the node coordinates before the step is solved, with a warning
naming it; Abaqus and LS-DYNA decks refuse it by name. A clamped–free column with its first mode
as imperfection under half its buckling load amplifies it by 1/(1 − α) within 2.8 %.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
buckle-euler-pinned and buckle-euler-cantilever (hex20 columns, −0.18 % from Euler with
Engesser's shear correction) and buckle-plate-square (a simply supported square plate, b/t =
100, −0.39 % from k = 4; the support and thickness choices in its README). ROADMAP and parity
updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Procedure::Buckle {modes, shift}: the step's loads as a linear preload, K_σ from its stresses,
and (K + λ K_σ) φ = 0 by block Lanczos in the K inner product: K⁻¹(−K_σ) on Cholesky without a
shift, the buckling transformation (K + σ K_σ)⁻¹ K on LDLᵀ with one, whose inertia counts the
load factors below σ (Grimes–Lewis–Simon 1994). Lanczos gains an operand and an eigenvalue map
(defaults keep frequency steps bit for bit) and reports converged negative eigenvalues. Results
are frequency results with a `buckling` part; modes display with their load factor.
solve.buckle (in the Static drop-down); Abaqus *BUCKLE, Nastran SOL 105 and LS-DYNA refuse it by
name. Euler columns of hex20 within 0.18 % of Engesser's load.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
K_σ = ∫ (∇N_a · σ ∇N_b) I dV for a stress state at the stiffness points (solids, plane and
axisymmetric elements with the hoop term), for linear buckling. Checked: uᵀK_σu = σ V for a
uniform stress on a distorted hex20 and a plane strain quad8, rigid translations in its null space.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
CommandSpec::listing gives id, label, the parameter doc and the schema; MCP
list_commands, the control channel's engine.commands and the new
fieldcraft-cli commands --json use it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The context panel's form shows typed fields instead of the JSON text: numbers
with the model's units, drop-downs of choices and of the model's sets,
materials, steps and bodies, checkboxes, vectors, groups and one-of variants
(a load's type switches its fields), lists of rows. Defaults are filled in,
required fields are marked, a value the schema finds wrong is noted under its
field, and OK waits while a field holds text that is not a value. The JSON
text stays as the Advanced view. fields.rs holds the generic widgets (row,
number, drop-down, text), adapted from SolidCraft's dialog rows.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
