SolidCraft lists a solid's faces in a different order from run to run
(the rounded box, for one), which reordered the triangle soup and the
face tags with every coordinate the same; welding keeps the first copy
it meets and every later stage visits ids in order, so the tet mesh
changed between runs. CanonicalSoup sorts the triangles by their
coordinates, numbers vertices by first use and face tags by first
appearance, and maps the tags back; mesh.tet.generate and the corpus
use it.
Tests: the washer's tet10 mesh has a fixed fingerprint (identical on
arm64 and x86-64 builds); a reordered, renumbered input gives the same
mesh; heavy: rounded-box and filleted-bracket mesh bit for bit the same
on repeated runs and with 1 and 8 threads.
The bracket oracle cases stay unfrozen: SolidCraft's tessellation
itself differs in the last bits between arm64 and x86-64. The coarse
case moves to 203.6 MPa with the canonical order; its band is 5%.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The platform maths libraries' atan2 and cbrt differ in the last bits
between macOS and glibc, so the dihedral angles and the shape measure a
mesh reports did too. The crate's own versions use + - * / and sqrt
only (correctly rounded everywhere) and agree with the platform's to a
few ulps.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Faces and bodies under a size control are tinted, a box drawn as its
edges and a sphere as a translucent ball, each labelled with its name
and size. The Local Size form takes the selected faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.size.set adds a size control on faces, bodies, a box or a sphere;
mesh.size.growth sets the growth rate; mesh.size.clear and
mesh.size.list. The tet mesher bakes the controls into its graded field,
the hex meshers, cells and the octree take the graded RegionSize, and
the block projection and mesh plans divide their edges by it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
SizeField::range gives a field's smallest and largest size. The octree
starts its root cells at the largest instead of the size at the part's
centre, and refuses before building when the smallest needs more levels
than max_depth.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The thinnest wall (measured to a facing wall) and narrowest patch give the cell size the grid
needs; the requested size refined that deep comes first, a root shrunk so one level fewer is
exact second; beyond the levels or cells allowed meshing fails at once naming the wall, levels and
cells. max_depth is a cap (default 4); rebuilds stay within the planned levels; lattice positions
no longer depend on the lattice depth; the report gives root size, levels, wall, patch and cells
per level before and after closure.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A crease inside one face whose ends are not on other features (a tessellation crease across the
crank's r1.5 bore fillets) bounded nothing, so its open ends were corners no region border could
reach and the feature map failed on every build. Patch widths now count bounding curves only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.face.split {name, face, datum} records a face split; it is
applied after the merges whenever the design is opened or cut again,
follows its datum (which it holds), undoes, and is saved with the
model. geometry.face.split.delete removes it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
#519 delivered tet-hex transitions through mesh.cells and removed the
'coming soon' mesh.transition catalogue entry, leaving its icon without an
entry (icons::tests::every_catalogue_entry_has_an_icon_and_every_icon_an_entry).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A merged face on several surfaces (a sliver absorbed into its neighbour)
had no exact surface, so the projection target fell back to its
triangles: flat curvature probes gave fewer divisions round the boss and
the enclosure base's symmetric mesh dropped from 0.70 to 0.51 once its
absorbs reached the cells. The target now projects a point of such a
face onto the exact surface of the B-rep piece it is on, trimmed to that
piece (Tessellation::with_pieces, Shape::tessellate_pieces); node
relaxation slides on it the same way.
Test from commands: the enclosure base's four slivers absorbed, meshed
whole and by symmetry, the absorbs kept in every cell.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A merge on `Base` failed with "no body `Base`" as soon as partitions cut
the body into cells (mesh.plan.apply's symmetry and corner cuts), so the
plan's cells and the body as opened silently lost every absorb and merge.
Each cell now takes the merge where the pieces of its faces touch (named
after the face kept, else merge:<name>[#k]), and the body as opened keeps
its merges whether partitions cut it or not.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The face's triangles are cut along the plane, split:<name>:a on its
negative side and :b on the other, both on the face's surface, with the
cut as a new edge between them and the face's edges cut where the plane
crosses them. Applied after the merges; the B-rep is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Plan before geometry.check (its size), mesh.plan.apply's own symmetry and the plan's saved
name, the fallback order, touching bodies, tet aspect ratio, undoing a relaxation that leaves
its region worse, and merging the cells of a split part.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
For a body with features the sweep cannot mesh, mesh.plan replies a
decomposition: the cuts that box those features into one cell, the region,
and the commands that make the cuts and mesh the cells with pyramids. A plate
with a joined dome: 5 cuts, 17 hex cells swept together, the dome cell tet,
valid and conforming, end displacement in tension within 0.4% of all-tet.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
With "transition": "pyramid" (the default; "tie" keeps the old join) a tet
cell is meshed after the hex cells, with a pyramid on every hex face of its
cuts and its tetrahedra on the pyramids' sides: one conforming mesh, no tie.
Where it cannot be built the cell says why (no_pyramids) and is tied. The
apex height is 0.4 of the quad's edge, so pyramids on faces meeting at a
right angle do not cross.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
transition::pyramid_surface puts a pyramid on every hex interface quad and
builds the tet region's surface closed by the pyramid sides, re-stitching the
neighbouring faces to the hex rim nodes. QualityOptions::frozen_faces keeps
those sides exactly (TetComplex refuses changes that remove or add a frozen
face; their vertices are corners), and apex_points checks the result.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The owner's direction: bad nodes move to better places, the nodes within a reach follow by
the graph Laplacian's harmonic extension, edges held, nothing outside the reach moves.
mesh.node.relax strong mode takes below and reach and reports each round.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The extrude/revolve cross-section took both ends of every B-rep edge as curve ends. A closed
edge without a vertex on it (a hole's rim after geometry.faces.merge of its halves) starts
wherever its chain was picked up, the old seam vertex, so that point stayed a curve end and a
node column stayed on the merged boundary. Only open edges' ends (and the B-rep vertices) are
curve ends now; the layout and interval assignment place the rim's nodes.
The hex test runs on a square plate and asserts the seams carry exactly as many nodes as the
same lines turned a quarter round the hole (10 and 10; before 5 and 10): the corner layout
puts arc-midpoint nodes there by symmetry, so 0 is not the right target.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A five-node pyramid, the conforming transition between a hexahedron's face
and tetrahedra: Bedrosian's rational shape functions with a collapsed (Duffy)
Gauss rule, a certified Jacobian on the base square with exact volume, a
scaled Jacobian, C3D5 / CPYRAM / LS-DYNA degenerate solid, VTK_PYRAMID and
the binary mesh code 13. A distorted hex8-pyramid5-tet4 transition mesh
passes the patch test and uniaxial tension exactly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.stitch {name, surface, tolerance} records a stitch; the
surfaces keep what was read (TaggedSurface::original) and are stitched
again from it whenever a surface is imported, the model opened, or a
stitch added or deleted (geometry.stitch.delete). Opening a model also
warns about merges that no longer apply.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Open points closer than the tolerance become one point and a point on
an open edge near the inside of another splits that edge's triangle;
edges that are not open are never touched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The whole cell is meshed with its layout split at each candidate cut and
the sheets there held planar (ProjectOptions::planes); the corner of the
best is added as the low cell's mesh with the whole mesh's face tags,
mirrored, and the middle meshed round it. Accepted only when the corner
and the middle are no worse than the cell meshed whole; else the cell is
meshed whole and corners.skipped says why.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
With symmetry, when the fundamental cell's two ends along another in-plane
axis are alike (layout planes and surface mirror-symmetric), the cell is
cut midway into the next block sheet and at its image; the low corner is
meshed with its blocks, mirrored onto the high one, and the middle meshed
with both cut faces fixed (#490). A plan cell's cut faces another cell's
mesh covers are taken as given. corners: false opts out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A face merge may keep one of its faces' names (Merge::into, model
FaceMerge::into): absorbing a tiny face leaves the neighbour by its own
name, so sets on it still select it. Shape::absorbing_neighbour finds
the face a tiny one shares the longest edges with. geometry.face.absorb
absorbs one face (into a named or the best neighbour) or, from_check,
every small and sliver face the last geometry.check marked; check marks
now carry the small face they found.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.faces.merge {name, faces} records a face merge in the model;
it is applied after the partitions whenever the design is opened or cut
again, undoes through the journal and is saved with the model. Meshers,
mesh.plan (features and rings see merge:<name>; a merged face is
prismatic when its B-rep faces are), checks and the viewport see one
face, drawn in the warm colour. geometry.faces.merge.delete removes it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A Merge makes adjacent faces of a body one virtual face in what meshers
take from it (tessellation tags, faces, surfaces, edge and vertex names):
the edges inside it are dropped and the pieces of an edge it leaves are
joined; the B-rep is unchanged. Design::merged applies merges after the
partitions and lists the ones that fail as feature errors.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A patch of quads already meshed on a face of the body (a neighbour's mesh)
is matched to the block faces on it: block vertices to its nodes (its
singular nodes first, then along its grid lines), block edges along its
grid lines, faces filled quad by quad. Those faces take the patch's
divisions and nodes, held through smoothing. mesh.hex.project takes
"fixed": [face names] and builds the patch from other bodies' meshes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
