Profiles revolved together merge into one region that keeps a vertex where
each shared edge met the axis. With the axis edge in several pieces the loop
skipped the builders for a profile with an edge on the axis, and the generic
sweep turned each piece into a degenerate face that booleans failed on.
Runs of collinear axis lines are merged into one first.
Fixes#487
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix: name an untitled design after its file on save and open
Design tabs all read "Untitled" because a design's name only ever came
from file.new. Saving a design still under the default name now names it
after the file (bracket.solidcraft -> "bracket"), and opening a file whose
stored name is the default shows its file name. Names chosen by the user
are kept. The rename is part of the save, so it is not an undo step and
does not leave the design marked as changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
* test: expect the file's name after saving an untitled design
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
The live preview also evaluates each command as a new body, to show the tool of a join or cut
(as_new_body sets every `operation` to "new"). A combine has no new-body form: its operation is
between bodies that already exist, and solid.combine rejects "new" ("operation must be join, cut
or intersect"). That error became the preview's error even when the combine itself worked, and
since OK is greyed while the preview has an error, a combine could not be applied from its
dialog at all. as_new_body now leaves solid.combine alone, so its preview shows the result.
Co-authored-by: Claude Opus 5.5 <[email protected]>
`fit: reduce` acts only on refusals marked too large. Three kinds weren't:
the corner build's contact lines leaving their faces or running backwards,
and a curved chain's contact reaching past the end of the seam it trims. Two
more were hidden: a later edge's too-large refusal lost to an earlier edge's
other error, and the corner build's lost to the local blend's in `fillet`.
The messages are unchanged.
Refs #293
Co-authored-by: Claude Opus 5.5 <[email protected]>
Moved in by more than its radius, a round collapses and its neighbours meet
along a new edge. That edge was always built as a straight line keyed by its
ends, so on a disc whose circular edge is rounded the four arcs where the floor
meets the side became one chord used by four faces, and the shell failed with
"This shell is not oriented and closed" (#319).
The new edge now runs where the edge's face meets the face across the round
(the round's far side, crossed as a strip), through the edge's middle moved
onto both: a line or a circular arc, checked to lie on both moved faces, and
refused otherwise. Twins are the new edges with the same ends through the same
middle.
Fixes#319
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(ui): draw sketch constraint glyphs in red
Traditional CAD convention marks constraint glyphs in red. glyph_edge
and glyph_text in both themes now use red values. glyph_bg is
unchanged. The same glyph box switches to the error colour when a
constraint fails. The new reds are chosen to stay distinct from that
error colour. They are also distinct from the blue used for selection
and hover. See the pull request body for the before and after RGB
values and the contrast reasoning.
* fix(ui): match constraint toolbar icons to the red glyph colour
The CONSTRAINTS panel buttons and their drop-down rows drew their accent
strokes in the normal sketch tool green. They now use glyph_text, the same
red the matching constraint glyph box uses in the sketch view. A new
panel_accent helper in toolbar.rs picks the colour: the constraint red for
the CONSTRAINTS panel, the existing sketch green for every other sketch
tool, and the plain accent everywhere else. No other toolbar styling
changed.
* Add a one-surface fill of closed 3D loops to geom
A closed loop of curves that does not lie in a plane has no exact surface;
the usual answer is one smooth face fitted over it. fill_loop does that:
- the loop's best-fit plane (Newell normal), with a frame chosen from the
loop itself so the result does not depend on where the loop starts, its
direction, or where the part sits
- the loop seen along that normal must be simple and must not fold or run
along the normal; otherwise it is refused ("not supported yet"), never
filled with wrong geometry
- one non-rational bicubic B-spline height field over the loop's box,
fitted by least squares to the loop's samples (The NURBS Book 9.4.1,
9.4.3, eq. 9.62/9.65) with a thin-plate smoothness term
lambda*A*int(h_uu^2 + 2 h_uv^2 + h_vv^2), A one grid cell's area, so the
fit is the same at any scale; only planes are reproduced exactly
- span counts per direction (long narrow loops fit), refined until the
loop is within tolerance, else refused with the deviation reached
bspline: bisected span search, basis functions on a stack array, one
clamping helper shared by curves and surfaces, one binomial helper.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Patch fills non-planar loops of edges with one smooth face (#250)
surface.patch with edges refused any loop that is not planar ("not
supported yet: patching a loop that is not planar"). It now fills it:
- planar loops still get one exact planar face, but planarity is certified
conservatively: lines by their ends, B-spline/NURBS edges by their control
points, intersection curves by their samples lying on a support plane
within tolerance; a loop that can't be certified is filled instead
- other loops get one face from geom's fill_loop, bounded by the body's own
chained edges, whole (no split): its history is one generated face whose
edges are the body's, and it stitches back into a closed solid
- intersection-curve edges are sampled by a seeded, guarded double
projection shared by the planarity test and the fill (plane_fit)
- the face tolerance is 10x the planarity tolerance (documented: later
operations take the face to contain its edges within it)
- edge picking runs inside the guard; the geom->truck conversion is shared
with the T-spline sheets (spline_conv); the Newell plane fit is shared with
STEP import
Tests: 3- to 8-sided, concave (dart, arrow, plus), flat-corner, two-edge and
imported rims fill as one face and stitch closed (volumes against an
independent integral); finite mesh normals, same result for any pick order
or placement; non-height-field loops and too-fine detail are refused.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Test the Patch dialog filling a non-planar loop of picked edges
The Patch dialog's only test used a sketch profile. Picking the four
curved rim edges of a box cut by a sideways cylinder now makes one
surface.patch command whose result is a single smooth face over the rim.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
A sketch on a flat face of a sheet metal body was refused ("this face has no exact planar
source"), so the only way was a plane frozen in space. When the sheet changes (a flange's
angle, the thickness), the frozen sketch stays behind: a cut from it fails on the slanted
flange or leaves a blind pocket in the thicker sheet.
`sketch.create` with a face of a sheet metal body now attaches the sketch to the panel the
face belongs to. It keeps the face's name, `sheet:<body>:<panel>:<top|bottom>` (the panel is
the base or a flange's feature tag), and takes the panel's exact plane from its flat region
and fold each time the model is evaluated, so the sketch follows the sheet through parameter
changes, unfold and refold. Its coordinates are the flat pattern's (the bottom face's y
mirrored). A face that is gone is reported as a lost attachment, never replaced by the
nearest face. The attachment follows a renamed or copied body, shows as `sheet_face` in the
command result and as its own status in Redefine Sketch Plane. `fixed: true` still freezes.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Sketch on a cylinder primitive's caps (#420)
A solid.cylinder's caps carried no construction certificate, so a sketch
on its top or bottom was refused unless fixed:true (#420's crossed
cylinders, built from primitives).
- kernel: FaceSource::CylinderCap { producer, high, plane };
Body::with_cylinder_certificate turns a cylinder's two extrude caps into
certified caps. kernel::cylinder's output is unchanged for its other
callers.
- doc: FaceCertificate::CylinderCap { high }, named F<id>:top / F<id>:bottom
as the cylinder's face names already are; New Body and Join cylinders
are certified, shells carry it as their planar source.
- format 15: designs can store the new certificate kind; version 14
designs need no change, and older builds ask for an update instead of
meeting an unknown kind.
Tests: top and bottom attachments follow a height and base edit and a
reopen; crossed joined cylinders keep both caps attachable; a shelled
cylinder's floor keeps its cap identity; malformed certificate JSON is
refused.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
* Format 15 also covers sketch_axis links (#448)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Project, Intersect, Include 3D Geometry and Text resolved the active sketch's
plane without the model, so on a construction plane that is built from geometry
(perpendicular to a plane through a sketch line, through three points, midway
between two faces, tangent, along a path) they stopped with "this plane is built
from the model: evaluate first". Evaluation resolves the same plane against the
model before the sketch, in its component's frame; the sketch commands now do
the same, in one place, for adding a link, refreshing the links on an edit,
snapping a point onto an edge and the internal face profiles.
Tests: a sketch on a plane through a sloped sketch line projects a point and a
line of that sketch, follows a parameter that tilts the plane (also after reopen
and after another edit), holds text, intersects a body and includes an edge; the
same on a three-point plane and a midplane.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A left press with Ctrl (or Cmd) held, no Shift or Alt, on empty space orbits
for that press, unless the preset binds Ctrl+left itself. It only orbits
once the pointer moves: a Ctrl+click still adds to the selection, and
Ctrl+drag on sketch geometry still drags it without snapping. Works with a
tool active, without adding geometry. Ctrl+box selection from empty space
becomes the orbit; Shift+box selection still adds.
Preferences › Navigation and the UI tour mention it. Test drives every
preset through real pointer events.
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
Co-authored-by: Claude Opus 5.5 <[email protected]>
The README called the solver damped Gauss–Newton. It now places what the
constraints fix by construction (loci intersections and rigid-cluster
decomposition, after Owen 1991 and Fudos–Hoffmann 1997) and runs
Levenberg–Marquardt on the rest, with the rank of its Jacobian giving the
remaining degrees of freedom. The constraint list also gains the ones it was
missing (point on curve, curvature, point-to-line, arc sweep, arc length, slot
length), and live drags are described.
Co-authored-by: Claude Opus 5.5 <[email protected]>
With "Orbit around: Point under the cursor", a drag that starts over
empty space used to pivot on the point under the cursor at the target's
depth, so an orbit begun near the edge of the view swung the model
around an off-screen point. It now pivots on the centre of the visible
bodies and sketches (the same bounds Fit frames), or on the view centre
when nothing is visible. A drag that starts on the model is unchanged.
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
Co-authored-by: Claude Opus 5.5 <[email protected]>
* docs: add OpenGraph and Twitter card tags to the book and web app
Links to the docs site and the browser app now unfurl with a preview card.
The book gets the tags through theme/head.hbs (og:title follows the page
title); the web app's index.html carries its own, pointing at /app/. Both
use the social preview image, now served from the book at /solidcraft/og.png.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
* docs: list the social preview image in ATTRIBUTION.md
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
One edge flange feature gave all its flanges one height and one angle. A
part whose flanges lean differently took one feature per angle, and
flanges of separate features don't close toward each other, so its
corners stayed open.
- sheet.flange (edge): an entry of `edges` is a point [x, y, z] as before,
or {point, angle?, height?} whose angle and height (expressions, checked
like the feature's) replace the feature's for that edge. Bad input is
refused with the edge named. Before, the object form was read for its
point and the rest was ignored without a word.
- The feature stores its edges as FlangeEdge. An edge without values of
its own is written as the plain point it always was, so designs without
them are read and written as before; an unknown key in an edge is
refused, not dropped.
- The edges' values are feature inputs of their own (Edge angle, Edge
height, after the feature's), so parameters, renames and
parameters.change reach them. timeline.edit names the edges again when
it changes them, so each value stays with its edge.
- SheetBody::add_flanges_each trims every edge by its own setback and
adds the flanges. The corners between them close as between equal
flanges: the closing already works from the two flanges it joins (each
one's fold and leg), so the flat pattern follows by hand from the
angles, the heights and the rule (the tests derive it).
- The Flange dialog shows a row per picked edge with an angle and a
height box (empty: the dialog's value) once more than one edge is
picked, and brings them back on Edit Feature.
Co-authored-by: Claude Opus 5.5 <[email protected]>
`sketch.constraint.symmetry` (line), `parallel`, `perpendicular`,
`collinear`, `tangent` and `coincident` (point on curve) now take `x` /
`y` for the sketch's own axes, matching what `solid.revolve` means by
lowercase x|y. A real curve with that id still wins.
An axis becomes a linked construction line on it: a new
`LinkSource::SketchAxis` resolved in sketch coordinates, so it stays on
the sketch's axis on any plane, is shared by every constraint on that
axis, is left out of profiles and is reported in `created`. Equal,
concentric, midpoint and horizontal/vertical keep refusing axes, since
the axis line's finite length or fixed direction would make them
meaningless.
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
Co-authored-by: Claude Opus 5.5 <[email protected]>
A Union dropped every construction certificate, so after any join no face
could take a durable sketch: sketch.create failed with "this face has no
exact planar source" even on a face the join never touched (#420, and the
"CREATE SKETCH: operation failed" reports #344, #195).
- kernel: map planar sources through a Union from both operands, with the
same exact-support rule Cut uses. Coplanar supports of the two operands
carry distinct identities, so a face merged from both stays without one.
- doc: Join extrude and Join box tools are certified like new bodies; a
cap moved off its designed height (into the target, or past a curved To
face) is not certified. Join producers are accepted when certifying.
Tests: both operands' faces attach and follow an upstream edit and a
reopen; a merged coplanar face is refused and fixed:true works; a face a
join covers whole is lost without moving to the new roof. Tests that used
a joined face as their "uncertified" example now use a merged face; the
trimmed-face case in a_sketch_on_a_face_stays_on_that_face now stays
attached to the surviving piece.
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
Co-authored-by: Claude Opus 5.5 <[email protected]>
kernel::sew refused a solid with a thin planar face away from the origin: a slab
30 x 2 mm and 0.00013 mm thick with a corner at (-300, -200, 5), turned 0.45 rad
about x, failed with "sew: face 1: cannot attach a plane to a wire that is not on
one plane", though its faces are flat to 1e-14 mm.
truck's plane fit sums the cross products of a boundary's control points about a
centre and takes the points' sum for that centre (it divides by the number of wires,
not of points): eight times as far from the origin as a rectangle of four lines. The
sum is the same about any centre, but its rounding grows with the square of the
centre's distance, and on a thin face, whose normal is short, it turns the normal far
enough for truck's own 1e-6 flatness test to fail: truck finds the slab's four thin
faces 3.0e-7 to 2.1e-6 mm out of the planes it fitted.
A planar face keeps truck's plane wherever truck gives one. Where truck refuses, the
same fit is made on a copy of the boundary moved so that the mean of its control
points is the origin, and the plane is moved back; a boundary that leaves its plane
or has no area is refused as before.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A body of several pieces (a plate and the islands a cut leaves inside its
holes, such as letter counters) was written as one BREP_WITH_VOIDS whose
other shells were voids. Export now writes one solid per lump, each with
its face colours; a real void stays a void of its lump.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A full revolve of a profile with more than one edge on the axis (a spherical shell's half ring:
both radial lines lie on it) took the generic sweep, built in place. Truck tessellates the
degenerate faces those edges sweep reliably only with the axis through the world origin, so on a
sketch plane off it the body measured about a third too large (a shell from r 18.5 to 40, 10 mm
above XY: 324 339 mm³ instead of 241 561), and booleans with it failed or removed the wrong side.
Such profiles are now swept about an axis through the origin and translated into place, as
revolve_touching_axis already does for profiles with one edge on the axis.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Minor bump: the SolidCraft rename (#389) and the design container format (#327) both change
the files people work with; builds 0.5 and older can't open designs saved by 0.6. Release
notes cover the new format, what's new and the upgrade from SolveCraft.
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
Co-authored-by: Claude Opus 5.5 <[email protected]>
Pattern copies of a post joined to a body already holding the original post had
their tops in its plane, so every join first pushed faces apart (about 190 ms,
then discarded). Faces now coincide only where their boxes meet, the push-apart
retry runs once per boolean instead of twice, and splitting prism outlines skips
the sampled arc projection for points off the arc's circle.
Sensor enclosure evaluation: 3.07 s -> 1.63 s, same bodies.
Co-authored-by: Claude Opus 5.5 <[email protected]>
The planar arrangement solved a line and a circle, or two circles, for their two
crossings even where the curves only touch. At a tangent contact the two roots are
rounding noise spread along the curves by its square root: a 1e-12 mm error in the
centre's distance from the line puts them 2e-6 mm either side of the contact on a
2 mm arc, well inside the tolerance of both curves; when the noise falls the other
way there is no root at all. Cutting a rounded corner (an arc tangent to the two
edges it ends on) out of a plate with planar_regions_boolean then ran that far along
the plate's edge past the arc's end before turning onto the arc: a 200 x 37 plate
turned by 0.25 degrees came back with six edges, one of them 3.45e-6 mm long.
Curves that touch within the arrangement's tolerance now meet at the one point their
centres give: the foot of the circle's centre on the line, or the point on the line
of centres of two circles tangent inside or outside. Circles of nearly one radius
about nearly one centre keep the general formula.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A cut-out made in the flat pattern could cross a bend only with edges
running along the bend or square to it: a round hole or a slanted slot
over a bend line failed to fold ("not supported yet: curved cut-outs
across a bend", "... cut-out edges running across a bend at an angle").
Sheet: a flat edge in a bend zone now folds whichever way it runs: along
the bend to a line, across it to an arc, and any other way to a curve on
the bend's cylinder (a slanted line to a helix). The curve is carried as
a chain of cubic Hermite pieces fitted within 1e-7 mm on both faces of
the sheet, with breaks that depend on the flat edge only, so the top
face, the bottom face and the wall share them. The wall between the two
chains is a ruled surface with radial rulings: the cut-out's wall stays
square to the sheet. The bend's own faces stay exact cylinders, now sized
to the whole boundary of their cell (a curved edge may bulge past its
corners).
Kernel: such an edge has no line, arc or conic form, so the sewing
interface gets EdgeSpec::Chain (a chain of cubic Bézier pieces: a cubic
B-spline with triple inner knots, its ends on the shared vertices) and
SurfSpec::Ruled (two chains joined by straight lines, so a wall built
from the chains holds them exactly). The sheet module's rev_edge becomes
EdgeSpec::reversed, so the new variant is handled where edges are
reversed.
The test for "along" and "across" is in millimetres (1e-6 mm at the
edge's ends) instead of relative 1e-9, so coordinates rounded by a script
fold as drawn.
Tests. Kernel: a box with one wall bulging as a cubic (chains of two
pieces at the bottom and the top, the wall ruled between them) sews to a
valid solid of the analytic volume, 27.6 (measured 27.59965); chains with
the wrong number of control points, a NaN or too many pieces, and a ruled
wall between chains of different piece counts, are refused. Sheet: a slot
turned 30° and a round hole across 72°, 90° and 108° bends fold to valid
solids that lose the cut-out's flat area times the thickness (K = 0.5:
400 and 100.53 mm³, measured within 0.02); a slanted flat edge folds to
its exact helix within 1e-7 mm (measured 1.9e-8) on both faces; lines
along and across the bend keep their line and arc. Engine:
fold_through_cut_outs now expects a round hole across a fold to fold, and
to unfold to the same round hole; the per-bend machining guard (#296)
sews a bend that carries a round cut-out, so a hole beside it cuts and a
hole in the bend is still refused.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
The flat-pattern point budget (16 384) counted every cut-out by its 0.001 mm
chords, arcs included, so a plate with 240 round 4 mm holes (about 100 chords
each, 480 exact arcs) was refused with "sheet metal flat geometry exceeds the
bounded processing budget" when the holes were cut in the unfolded sheet. The
planar booleans work on exact lines and arcs whole, so those now count once
each; a sampled curve still counts its chords. A second limit keeps the
chords of everything, arcs included, at 65 536, the same figure the planar
boolean applies to the sampling it does itself, so the work stays bounded.
planar_region no longer samples an exact loop only to discard the result: the
complexity check right above it already covers the same budget.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A panel label too wide for its panel (beside its caret) wraps between words
onto a second line; a single word wider than the panel stays whole. Each line
is centred, and the label's hover area grows to hold both lines. A panel's
buttons are centred in the panel, so a one-button panel such as Finish Sketch
lines its icon up with its label.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
* fix: fillet fit review follow-ups
From the review of #388 (merged before these landed):
- The Fillet dialog's Applied Radius showed nothing when editing a fillet
that was already reduced: the preview found the radius by diffing the
states before and after. The engine's preview now keeps the command
replies, and the dialog reads the radius of the feature they name.
- Pattern copies of a reduced fillet try the radius the original was
reduced to first, instead of each searching again (up to 16 fillets).
- fit: reduce with a chord or variable radius is refused instead of being
silently ignored.
- One helper appends a note to a feature's warning; too_large is imported
like unsupported in the loop and curve blends.
Refs #293
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* Use the solidcraft_doc crate name after the rename
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
- frame::heading draws a panel's title row (heading_bg) or a section heading
(subheading_bg) on a band darker than the dialog, in both themes. Every
docked command dialog, the Sketch Palette and Redefine Sketch Plane use it.
- Sketch Palette: "Options" and a new "Sketch Status" heading are section
bands; the status line sits under its own heading.
- Sketch Palette: Finish Sketch no longer centres in the leftover height, so
the palette ends one line below it, one line after the status.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
object_height, curved_target and curved_target_any took the first solid body with any face
within its pick tolerance of the To Object point. That tolerance is 5 % of the body's size,
so a large body beside a small target took picks made on the target: a ridge extruded up
to a post 2 mm above a plate treated the plate as the target, nothing trimmed the tool, and
it ran past the post (to x 9.08 instead of -2.31).
They now share face_at: the nearest face over every solid body, still within that body's
tolerance. appearance gains nearest_face (the face and its distance) and pick_tolerance,
which face_index_at now uses as well.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* fix(doc): extrude and revolve in a moved component from another component's sketch
A feature built from a sketch of another component read the sketch's plane as if it were in
the feature's own component. When the two components are placed differently (a moved or
jointed part), the tool landed transformed along with the feature's component: a join on a
part turned half a turn about Z, from a root sketch, came out on the far side of the origin.
Extrude and Revolve now see the sketch through both placements, as sweeps along 3D paths and
sketches on another component's face already do (sketch_in_feature_frame, using
profile_in_frame). The sheet-metal rotated-frames test built its cap witness from a sketch of
the moved component while the root was active, relying on the old reading; it now builds the
witness in the sketch's own component, which is what it measures against.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* test: To Object extrude in a moved component from a root sketch
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* style: rustfmt
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Edge flanges meeting at a corner of the base were closed only at exactly
90°; at any other angle they stayed open (a V at 72°) and the rule's gap
was not used.
The flanges of one feature now close at any convex base corner and any
bend angle: each panel end is cut square to the sheet on a line in the
flat (slanted off 90°, stored as ext plus a new per-end slope) so the
edges nearest each other, on the inner faces, run parallel the rule's gap
apart about the plane bisecting the inner faces. The construction reads
the two flanges' own angles, so it holds for unequal ones as well. At 90°
it is the extension the old code gave (reference case 69-sm-tray is
unchanged). A corner that can't close (a gap under 0.01 mm, flanges
bending opposite ways, ends that would overlap in the flat pattern) stays
open, and the flange feature reports a warning that says where and why.
A flange of a later feature leaves the corner as it was (reference case
75-sm-bracket-holes: the earlier flange keeps its length).
Tested at 72° and 90° against a hand derivation, on a trapezoid, and
every 5° from 45° to 135° on a rectangle and a trapezoid (gap exact, one
flat region without hairline edges, one valid shell holding the flat
material).
Co-authored-by: Claude Opus 5.5 <[email protected]>
With sketch curves selected, the palette's Normal / Construction / Centerline
buttons now show the line type of the selection (each type of a mixed
selection); with nothing selected they show the drawing mode, as before.
Previously no button was highlighted while curves were selected.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A parameter change can break a feature without failing the command that
made it; parameters.change reports it only in its `errors`. `run` then
exited 0 and exported the bodies as they were before the failing feature:
a shrunk sheet-metal tray whose unfold failed came out folded, without
the holes and cut-outs made after the unfold.
`run` now checks the evaluated timeline before writing anything. Any
feature with an error fails the run with status 1, lists the failing
features on stderr and writes none of the --out and --save files, as a
failing command already does. --allow-errors writes them anyway. `eval`
is unchanged and still reports the errors in its timeline.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Snap package: build, test and attach a strict snap to every release
packaging/linux/snap/snapcraft.yaml (core24, strict, gnome extension) repackages
the release's Linux tarball like the Flatpak does. The release workflow builds it
for amd64 and arm64, installs it with --dangerous, models a box in the confined
app on headless X11 and Wayland, and attaches solidcraft-<version>-linux-<arch>.snap
plus the version-less copy. When SNAPCRAFT_STORE_CREDENTIALS is set, nightlies go
to edge and release drafts to candidate, and snap-store.yml promotes candidate to
stable when a release is published. The README gets a Snap badge and install line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
* snap smoke: stop the app's whole process group, refuse a busy control port
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
* snap smoke: quit the app cleanly between backends
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
It isn't planned, so it no longer appears in the workspace menu's
"coming later" list. Drops ui.generative_design from every locale and
checks the menu doesn't list it.
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: Claude Opus 5.5 <[email protected]>
Badges and one-line instructions for Windows, macOS, Linux and the web app,
right after the tagline and demo. The links use releases/latest/download with
version-less file names, which release.yml now attaches (and checksums)
alongside the versioned installers. The Flatpak note and the name/compatibility
section move into the book's Getting started page.
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: Claude Opus 5.5 <[email protected]>
Every panic (in a command, in the kernel, anywhere else) and every unclean
exit (abort, stack overflow, kill) leaves a report in a local crash folder:
message, file:line, a trimmed backtrace, version, commit, system and renderer,
the command and recent commands, and when possible the design and replay.json
that reproduce it (solvecraft-cli crashes replay <id>).
- Cost: nothing until the app installs the hook (tests, CLI and web never
do); then one small journal line per top-level command of the design on
screen, taken back with a truncate when the command changed nothing.
- Unclean exits: each run holds a lock on its journal; a journal nobody holds
at the next start belongs to an app that died. Autosaves restart the
journal from the autosaved design.
- Bounded: a crash's signature (place + message, numbers ignored) is counted,
not rewritten; at most 5 new reports per run, 20 reports, 50 MB, 90 days;
recovered kernel panics are pruned first.
- Agents: diagnostics.crash_reports / crash_report / crash_reports.clear
commands, the MCP crash_reports tool, solvecraft-cli crashes, solvecraft
--crash-log; diagnostics.crash_test (with SOLVECRAFT_CRASH_TEST) checks it.
- People: the Crash Reports window opens after a crash (Help > Crash
Reports…) with a reviewed issue draft per report; nothing is sent.
- Release builds keep line tables for file:line in backtraces.
Tests: child processes that really panic in a command, in the kernel, on a
thread, and abort; dedup counts, limits, hostile folders, journal parsing,
the UI window and draft, the MCP tool. docs/crash-reports.md.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
kernel::sew builds an arc edge, and the wall an extruded arc sweeps, with truck's
three-point arc (circumcentre, then a turn about it). On a very flat arc that
construction ends off its own vertex: a 12 mm chord with a 0.08 um sagitta (a 225 m
radius) ends about 1e-6 mm short of it, and the planar face holding the arc, 1238 mm
from the origin, fails with "cannot attach a plane to a wire that is not on one plane".
truck's plane fit takes the sum of the wire's control points as its centre, so a gap
of that size is scaled by a distance of the order of the coordinates and tilts the
estimated normal beyond the fit's 1e-6 flatness tolerance.
Arcs whose sagitta is under 1% of the half chord are now built as their exact rational
quadratic (apex 2/(1-t^2) along the bow, weight (1-t^2)/(1+t^2), t the sagitta over the
half chord), for edges and for the extruded walls on them. Deeper arcs keep truck's
construction.
Co-authored-by: NOWN-DEV <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* feat(kernel): typed TooLarge refusal and fillet_max search
Blend refusals caused only by the size (larger than the neighbouring faces,
taller than the walls, longer than the next edge, larger than a corner
radius) now return KernelError::TooLarge, displayed as before. fillet_max
finds the largest radius below a request at which the fillet of the edges
works, to three significant digits, by building candidates; it is an explicit
call (up to 16 fillets), not run on every refusal.
A corner edge that doesn't run square to the edge is now reported as such
instead of as a blend larger than the neighbouring faces.
Refs #293
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* feat: fillet fit option reduces a radius too large for its edges
solid.fillet takes fit: exact (the default, as before: a radius too large
for the geometry around the edges is refused) or reduce: the radius is
reduced to the largest that works for all the picked edges (kernel
fillet_max, three significant digits, every candidate built). The feature
stores the requested radius, so it refits on every evaluation; when it
reduces, the feature's warning says so and the command returns
radius_applied. Pattern copies of the fillet use the same rule. The file
format writes fit only when it is reduce.
The Fillet dialog gets a Radius Fit row (Exact / Reduce to Fit, constant
radius) and, when the preview reduced the radius, an Applied Radius line;
editing the feature keeps the choice.
One radius for all edges for now; per-edge radii and taper follow.
Refs #293
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
Two-finger scroll pans the model instead of zooming; pinch-to-zoom
zooms toward the cursor and honors reverse zoom. Trackpad scrolls
arrive bracketed (Start..End, momentum included) while mouse wheels
send bare moves, so phases tell them apart: bracketed gestures pan,
bare vertical input zooms and bare horizontal input pans (thumb wheel).
Mouse line/page input keeps zooming, and ui.scroll now sends line
input so scripts and agents are unaffected. New Navigation preference
'Two-finger scroll pans' (default on) restores the old behaviour
when off.
One extrude cutting many circles from one sketch still cut the plate once per
circle, each boolean rebuilding and re-meshing a plate grown by every hole before
it (32 circles 2 s, 128 circles 60 s). The #261 fix joined clear tools with
kernel::union_apart only in pattern replay; apply_traced now does it for every
cut with 8 or more tools (patterns included), keeping each piece's face lineage.
