- LAYERS ribbon button runs a command that opens the Layer Manager pallet;
the ribbon no longer keeps it highlighted.
- Layer Manager: search box stays right-aligned, the column header fills
the row, no stray contour lines when the pallet is taller than its rows.
- Auto-hidden edges don't show the shown-group accent bar.
- Auto-hide reveal and hide wait 150 ms of rest, so passing over the
strip doesn't flash groups open.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Fixes:
- Hover state no longer drops when the pointer moves up from one strip
icon, group grip or title bar to the one above: iced handles the
element above first, so the old element's "left" (None) cleared the
hover just set. Leave messages now carry the element and only clear
their own hover.
- The drop preview used the pallets' own widths; it now uses the
group's width, matching where the pallet lands.
- Group indexes from messages (group grab, splitter) are looked up
safely, so a message from before a layout change no longer panics.
- Floating placements read from the config are healed (finite, positive,
at least the minimum size), like the group weights already were.
- The shown group's edge bar is centred in its row: a stack takes its
height from its first layer, and the icon column was shorter than the
row. The "Drag to move group" tooltip is removed.
Simplifications (no behaviour change):
- dock_open_at_default / dock_unpeek replace seven copies of "dock on
the right if unplaced, then reveal" and four of "stop peeking".
- The drop target takes the grab offset as a parameter, so a drag
update stores its state once.
- dock_set_open, ensure_settings, the shown-index bookkeeping after a
group is removed and the on-screen width clamp each lose duplication.
- VBarLabel drops options its single caller never varied.
- The drop preview's landing computation is one helper.
Naming and consistency: pallet names in the + menu, the drag ghost and
the floating title bar go through t!(); StripHit::Tab becomes
StripHit::Join; stale comments updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- The dock's state handling and drawing move out of update/dialog.rs and
view/mod.rs into src/app/dock/ (update.rs, view.rs, tests.rs). The
overlay view_main stacked over the workspace (floating pallets, + menu,
drag preview, pointer capture) becomes one `dock_overlay` call. Code is
moved, not changed.
- Strip icons no longer show the pallet name on hover.
- Tests trimmed where they overlapped: the top / bottom half drops are
one test, the two hover tests are one, and the in-group icon reorder,
raise-float, empty floating title bar and slot-span tests are dropped
(each is covered by another test).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
No intended behaviour change except the fixes noted below.
- One drag state: a single `DockDrag` (move pallet / group, width,
splitter, floating size, Layer Manager column) replaces nine fields
(dragging, dragging group, resizing, split, float resizing, origin,
target, grab offset, layer column flag) that had to be kept in sync.
- `dock_expanded` becomes `dock_peek` with one meaning: a pallet revealed
although it auto-hides. `dock_reveal(id)` shows a pallet's group and
peeks it; commands that open a pallet now use it, so opening a pallet
also switches its edge to that pallet's group.
- Each group stores its own width (falling back to its widest pallet's
width until first sized), instead of every pallet's width being kept in
sync. Pallet widths now only size floating pallets and new groups.
- One `dock_set_open(id, open)` holds every pallet's open and close path.
- Leftovers removed: the tab-group config format that never reached main,
the multi-tab drag ghost header, the separate icon-hover message.
Fixes:
- Hovering a strip icon reveals an auto-hiding edge again (the icons had
lost the hover message in the option B strip). Covered by a test that
moves the pointer over the icon in the real view.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Double-clicking a docked or floating title bar did nothing. iced keeps
a widget's state (including the first click of a double-click) only
while the widget tree keeps its shape, and pressing a title bar starts
a possible drag that wrapped the workspace in an extra pointer-capture
layer, rebuilding the title bar and forgetting the first click. The
workspace is now always inside the same stack and mouse area; the
capture handlers are only attached while dragging. A test drives the
real view through iced's UserInterface (keeping its cache between
events, as the runtime does) and fails without this fix.
- The shown group's edge bar was shorter than its row (the tooltip
around the edge band sized it to its content), so it looked off
centre. Band and bar now have explicit heights.
- Picking a pallet in the + menu closes the menu.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
The icon strip follows the agreed "option B" concept:
- Flat 40 px strip; groups are rows of their pallets' icons separated by
hairline dividers, with no grip lines. The + button is a small round
button under the last group.
- The shown group is marked by a blue bar on its window-side edge and
brighter icons. That 8 px edge band is the group grip: hovering it
widens and lights the bar, tints the row, shows a grab cursor and a
"Drag to move group" tooltip; dragging it moves the whole group.
- Icons still drag single pallets: within their group or into another
group (between its icons), or onto a divider to start a new group.
Hovering an icon gives it a soft background and shows its name.
- Drop feedback: a short accent line with end caps between icons means
"join this group here" (the target group's bar lights up); a
full-width line on a divider with a "+ New group" badge means "new
group here". The dragged icon (or whole group) fades in place and a
ghost follows the pointer.
- The zone around a divider (a few px into the icons on either side)
starts a new group; the lower half of a group's last icon still joins
that group at the end.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Dragging a pallet over its own group (e.g. the block palette, alone on
the right edge) targeted joining that group. Joining first detached the
pallet, which removed the now-empty group, then indexed it: an
out-of-bounds panic, hit already by the live drop preview. A pallet alone
in the group it would join now just stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Auto-hide is a setting of the left / right edge rather than of each
pallet: the pin on any docked pallet turns it on for its whole edge,
which then shows only its icon strip until an icon is hovered. A
floating pallet keeps its own auto-hide.
- Hovering the strip icons only shows a group while the edge auto-hides;
otherwise groups switch on click.
- The + menu checks only the pallets open on that edge. Picking one that
is open elsewhere (the other edge, floating) moves it to this edge;
unchecking a checked one hides it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A group is now a set of pallets shown together, stacked top to bottom,
and an edge shows one group at a time. The icon strip lists every group
(grip bar over its pallets' icons, the shown group on a grey
background); clicking any icon of a group shows that whole group.
- Dropping a pallet on the top / bottom half of a pallet in the shown
group stacks it above / below; dropping on the strip's icons places it
in that group at that spot, and on a grip or below the last group
starts a new group (which is then shown).
- Splitters set the heights of the pallets within a group; double-click
makes them equal again.
- Each group keeps its own width; the divider sizes only the group it
belongs to, and switching groups switches width.
- A group whose pallets all auto-hide shows only while hovered.
- Layouts saved by older builds load with their stacked pallets as one
group.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Each dock edge now has a vertical icon strip along the window edge in
place of the horizontal tab row and the auto-hide rail.
- Every shown group gets a grip bar with its pallets' icons below it;
the shown pallet's icon has a grey background. Clicking an icon shows
that pallet in its group; hovering the icons of an auto-hiding group
opens it.
- Dragging an icon within the strip reorders it or moves it into
another group; dropping it on a grip or below the last group makes it
a new group there. On the pallet area, the top / bottom bands still
start a new group above / below and the middle joins the group.
- Dragging a grip moves the whole group to another position or edge.
- A + button under the groups opens the pallet menu (icon, name, check
mark). Opening a pallet from it docks it on that edge as a new group,
or in its existing group there; a checked pallet is hidden.
- Groups keep their width when moved; the divider against the viewport
sizes the whole edge column.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- The tab row shows only when at least two pallets share a slot.
- Tab icons are larger (18 px). The shown tab gets the grey background
without a border; other tabs have no background.
- The pallet menu was drawn by a dropdown that squeezed it to one icon
wide. It is now its own overlay hanging under the menu button, laid
out like the right-click menu: pallet icon, name, and a check mark on
the right for the pallets shown in this slot. Any click outside closes
it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- LAYERS opens the Layer Manager as a dockable pallet instead of a modal
dialog with a darkened backdrop. It floats over the middle of the
drawing the first time and keeps its place after that; LAYERS again
(or its close button) hides it. The table keeps its natural width and
scrolls sideways when the pallet is narrower, and the Name column
divider now drags through the dock's pointer capture. Ctrl+A selects
all layers while a layer row is selected in the open pallet.
- The Layer Manager is listed in the tab-row pallet menu like the others.
- Double-clicking a docked title bar floats the panel beside its edge;
double-clicking a floating title bar docks the panel on the side its
title bar faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Dropping on a docked pallet now stacks it above or below over the top
and bottom 35 % of the slot; only the middle 30 % makes it a tab.
- Tabs show the pallet icon (title as tooltip), aligned to the left.
Every docked slot has the tab row, so its menu is always reachable.
- A menu button at the right of the tab row lists every pallet with a
check mark for those shown in this slot. Checking one opens it as a
tab here (moving it from wherever it was docked); unchecking hides it
and keeps its tab for next time.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Dragging a tab along its slot's tab strip moves it to the gap under the
pointer; the drop preview shows the new tab order. A panel dragged from
elsewhere onto a tab strip lands at that position too. A drop in the
middle of the slot still appends a newcomer and leaves a member where
it is.
- All tabs of a slot share one width: a joining panel takes the slot's
width, resizing or resetting one tab sizes them all, and slots sized
apart by older configs render at their widest tab. Switching tabs no
longer changes the column width.
- Hovering an auto-hide rail raises its slot without turning the rail
blue.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Docked title bars show the pin and close only while the pointer is
over the bar; the bar keeps a fixed height so nothing jumps.
- Auto-hide on is drawn as a 30° tilted pin (new pin_active.svg)
instead of a coloured button background, on docked and floating bars.
- A floating panel's resize grip sits in the bottom corner away from its
title bar. With the bar on the right it is bottom-left (new mirrored
resize_left.svg) and resizing from there keeps the right edge fixed.
The bar stays on its side while resizing.
- While a floating panel is dragged, only the drop preview shows it; the
panel no longer stays drawn at its old place.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Every docked panel now shows its title bar flush along the top, like the
Properties panel: dock::frame takes the title bar separately and pads
only the content below it.
A floating panel drops its horizontal title bar for a vertical one on
the side facing the nearer workspace edge. Close and the auto-hide pin
sit at the top; the panel's icon sits at the bottom with the title
reading upward above it. The free part of the bar drags the panel. With
auto-hide on, a floating panel shrinks to its title bar until hovered.
Panel views take a dock::Chrome (auto-collapse plus floating) in place
of the bare auto-collapse flag, so the shared title bar knows when to
step aside.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Panels can now float over the workspace, share a docked slot as tabs,
and split an edge at heights the user picks.
- Dropping a panel away from the edges floats it at the pointer. Floating
panels move by their title bar, resize from a corner grip, and come to
the front when clicked.
- Dropping in the top or bottom quarter of a docked slot docks the panel
above or below it, as before. Dropping in the middle adds the panel as
a tab of that slot. Pressing a tab shows that panel; dragging a tab
pulls the panel out again.
- While dragging, a blue ghost previews the result: the new slot, the
slot with its future tab row, or the floating window.
- A splitter between stacked slots sets their heights; double-click it
to make the slots equal again. Heights persist.
- A press only becomes a drag after 5 px of movement, so clicking a title
bar or tab never moves the panel.
The persisted layout now stores each edge as tab groups with a height
weight, plus a list of floating panels. Configs with the old
bare-panel-id stacks still load as single-panel slots.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- An open path is swept from its end nearest the pick point (in plan), as
the reference does; the record keeps the original path and the placed
frame marks the start.
- Kernel from ramox81/cadkernel 1df75f5: one face per path run for
twisted, scaled and spline sweeps, placed records swept from the placed
end, end caps without pcurves.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
grips lists the selection's grips; grip_drag moves one to a world point
through the viewport's own grip gesture with snaps, ortho and polar off;
click presses the left button where a world point shows, optionally with
Ctrl and/or Shift held.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Before a grip is picked, the crosshair now jumps to the grip under it, so
the click lands where the marker shows.
Discussion #1557
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The no-selection panel showed only the AC code. It now reads e.g.
"AC1032 (2018+)", from the version the file was opened as.
Discussion #1442
Co-Authored-By: Claude Opus 5.5 <[email protected]>
An aggregate of irregular stones on a 25.4 tile, built from edges whose
slopes repeat on the tile so every stone closes.
Discussion #1533
Co-Authored-By: Claude Opus 5.5 <[email protected]>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The dimension's own block parts were mirrored with their text, so the
measurement read backwards. Text orientation is kept under reflection,
the same as TEXT and MTEXT with MIRRTEXT off.
Fixes#1639
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Center and Quadrant found nothing on a polyline's bulge segments: the
lightweight and heavy polylines carried no snap points for them, and a
polyline split into several wires kept its points on one piece whose box
the others' never reached. Each arc segment now carries its centre and
quadrants, hovering the segment offers its centre, and a wire's box
covers its snap points.
Fixes#1640
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DimensionPreview drew identical generic triangles regardless of dimblk/dimblk1/dimblk2. It now resolves each end through the shared arrow_from_block_name mapping (widened to pub(crate)) and draws per-end glyphs, keeping DIMTSZ tick precedence. Tests: arrow_name_mapping_covers_preview_kinds pins the shared contract; 2 preview_arrow_tests pin per-end resolution (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
Claude