ARRAYEDIT picks an associative array (or takes the preselected one) and
its Source option opens the objects every item repeats in the Block
Editor; saving there updates all items at once. Counts and spacings stay
in Properties.
Refs #1109
Co-Authored-By: Claude Opus 5.5 <[email protected]>
SECTIONCULL keeps only what the selected section object (or the live
section of the space) shows: solids, surfaces and closed meshes are cut
to it with the same planes the live section uses, open meshes are
clipped face by face, and every other object wholly outside it is
erased. Objects across the boundary that cannot be cut stay whole. One
undo step.
The section's bounding planes are gathered once (section_planes) and
shared by the live section and the cull.
Refs #1407
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COMPARE picks a drawing (or takes its path) and matches its objects with
this drawing's by what they draw: type, layer and tessellated geometry,
so an unchanged copy matches whatever its handle. Objects only here are
outlined in green, objects only in the other drawing in red, over the
current drawing, and Next / Previous zoom from one difference to the
next with a count in the prompt. A moved or edited object shows as one
of each. eXit (or Esc) clears the overlay.
Refs #970
Co-Authored-By: Claude Opus 5.5 <[email protected]>
FBXEXPORT (also EXPORTFBX) saves every 3D mesh of the drawing (solids,
surfaces and meshes, at full display resolution) as a binary FBX 7.4
file for visualisation tools: one model per object with its geometry,
face normals and a material in its display colour. Axes stay Z-up and
the unit scale follows the drawing's insertion units.
Refs #1502
Co-Authored-By: Claude Opus 5.5 <[email protected]>
SLICE now takes MESH, polygon mesh and polyface mesh objects. A mesh
that closes a volume is sliced as a solid, so each side is capped and
becomes a 3D solid. An open mesh, such as a pipe run imported without
end caps, is clipped face by face and each side stays a mesh, open
along the cut. Keeping one side or both works as for solids, in one
undo step.
Refs #1398
Co-Authored-By: Claude Opus 5.5 <[email protected]>
MENUBAR 1 shows File, Edit, View, Insert, Format, Tools, Draw,
Dimension, Modify, Parametric and Help menus above the ribbon; every
entry runs an existing command, and a test keeps each entry pointing at
a registered command. RIBBONCLOSE hides the ribbon and RIBBON brings it
back, so the menus can replace it. Both choices persist.
Also translates the "File" label, which every locale had left in
English.
Refs #1450
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COMMANDLINEOPACITY (20-100 percent, default 100) and a slider under
Options > Display make the floating command line's panels see-through,
so the drawing stays visible behind it. The input field stays opaque
for legibility. The value is an application setting that persists.
Refs #1494
Co-Authored-By: Claude Opus 5.5 <[email protected]>
HPASSOC (0 or 1, default 1) is the starting state of the hatch
command's associative option. It is an application setting: typed
directly or through SETVAR, it persists across sessions and does not
mark the drawing modified.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
TXTEXP replaces each selected TEXT and MTEXT with one polyline per
glyph contour, on the text's layer and with its properties: a
lightweight polyline for flat text, a 3D polyline for tilted text.
The outlines come from the same glyph tessellation the text renders
with, so stroke fonts give their strokes and outline fonts their
closed contours.
Refs D#1665
Co-Authored-By: Claude Opus 5.5 <[email protected]>
In model space MVSETUP draws the sheet border at the drawing scale
(scale factor, paper width and height) and zooms to it, or switches to
a layout. On a layout it creates viewports in a bounding area (a single
one, a 2x2 engineering set of top/front/right/isometric views, or an
array with spacing), deletes picked objects, and scales picked
viewports to a paper/model unit ratio.
A viewport's fit to the model now measures the model along the
viewport's own view direction, so side and isometric views frame it
too.
Refs #1501
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PASTESPEC offers the formats on the clipboard: Objects and Block for
objects copied in the application (the PASTECLIP and PASTEBLOCK paths),
and Text for the system clipboard's text, placed as multi-line text in
the current text style with its lines as paragraphs.
Refs #645
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DVIEW (alias DV) offers TWist and Undo. TWist rolls the active view
or viewport camera to the typed angle; Undo steps back through the
twists made in the session. The new alias reaches existing profiles
through the alias migration table.
Refs #638
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PUBLISH now runs what PRINTALL does: pick the layouts, each plotted with
its own page setup, into one multi-page PDF or to the printer.
Refs #1124
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A layout opened for the first time - one whose sheet viewport had to be
made, or one created in this session - gets a viewport centred on the
printable area, 0.8 of its width and height, zoomed to the model's
extents, while LAYOUTCREATEVIEWPORT is on. The profile variable takes
ON/OFF or 1/0 and is kept with the settings.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A new drawing is metric with metre insertion units, but its annotation
multiplier stayed at Scene::new()'s unitless 1 while opened files and
CANNOSCALE convert paper millimetres into drawing units (0.001 at 1:1).
Annotative text and dimensions were drawn 1000x too large until the
first scale change, then shrank to their real size and looked gone,
also after switching back to 1:1.
One helper now derives the multiplier from the header; new drawings,
file open and every INSUNITS change (UNITS, the units popup, DWGUNITS,
SETVAR) go through it.
Fixes#1674
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The Image tab gains an Adjust card: X/Y offset in pixels (-2000..2000)
and X/Y scale (-10..10, tenth steps, a negative scale mirrors, zero keeps
the image's scale) with spinners and Reset, inactive while the image is
stretched; Keep aspect ratio is a switch and makes both scales follow.
- The preview shows the image at its offset and scale, tiled when tiled,
and a stretched image kept to its aspect ratio covers the view.
- Automation: step=<field>,+1|-1 and reset; offset/scale take any numbers.
- Shaded with edges, Shades of Gray and Sketchy have catalog entries in
every language.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The background image texture is not an sRGB view: the image is drawn with
its own colours, as the solid and gradient colours are.
- An entered paper-space viewport shows its named visual style (Realistic,
...) in the render-mode picker, and a mode picked there is recorded as the
viewport's visual style.
- The view_background automation action takes offset=x,y and scale=x,y.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
TRIM already takes objects selected before the command as cutting
edges; EXTEND ignored them and extended to the nearest object in the
path. It now takes them as boundary edges the same way.
Fixes#1732
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The pasted block is defined around the clipboard base, so its origin
is already that point, but the insertion still subtracted the base and
landed the block offset from the pick. The base now only positions the
world-space preview, and it stays f64.
Fixes#1731
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The button runs QNEW since #1635, and QNEW was missing from the
commands the Start screen allows, so it was refused until a drawing
was open.
Fixes#1728
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Selection filter: condition rows name INSERT as a block reference, as
the object-type list does since #1726 (shared qselect_type_label).
- MCP: re-pin the tool schema digest for the view_background action
added in #1722.
- -VIEW: fix an indentation slip and wrap two long lines from #1722.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Gradients: the middle colour sits (horizon - 0.5) viewport widths from the
centre and blends over height viewport heights each side; two colours
blend over a viewport height each side.
- Image backgrounds: offset in device pixels (right, down), negative scale
mirrors, fitted with aspect ratio covers the viewport; the dialog keeps an
image's offset and scale.
- Layouts: a model-space view restored on a sheet asks for the viewport,
enters it and gives it the view's camera, background and visual style;
inside a viewport the view goes there; a paper-space view's background is
kept on the sheet viewport but not drawn; floating viewports draw their
background.
- Background objects no view or viewport uses any more are erased; a view
without a background restored where the viewport already is leaves the
viewport's background.
- The viewport's named visual style (Realistic, ...) shows by name and the
render-mode picker records its style on the viewport record.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ported from d719fb77 (#1717); the hatch draw-order, PDF and
recovery-settle hunks stay out (main owns those paths).
- La16 was still billed at 4 B/px: the no-conversion special case
keyed on native_bpp == 4, which La16 also is — but only Rgba8 is a
real move in into_rgba8, so La16's decode peak is 8. The case now
keys on the color type, and a table test pins every layout's peak
(plus GIF's screen+frame 8) so the accounting can't silently drift.
- json_values_match: an integer beyond f64 precision no longer matches
a float it merely rounds onto; a mixed pair matches only when the
float is whole and converts back to exactly that integer (also the
fuzz finding of 9262d63f).
- ocs-control.js resolves `ready` with the API object instead of
window.ocsControl, which is still undefined when the bridge already
exists as the script runs (built before the first settle, avoiding
the temporal-dead-zone throw of a later const); DATALINK on web says
the typed path is superseded by the picker instead of silently
discarding it.
(cherry picked from commit d719fb77)
Ported from 2c38de53 (#1717). Main already carries the hatch PDF draw
order fix (#1345), the numeric set_properties compare (#1348) and the
web open from bytes, so those parts stay out; what remains:
#1349 — window.ocsControl.ready/request promise wrapper with an
ocs-ready event (web/ocs-control.js, loaded by the web page), and the
startup donation prompt is suppressed once a control request is seen
(opt-in pre-boot via localStorage["opencadstudio.automation"] = "1").
docs/automation/web.md documents both. The control protocol stays at 1.
DATALINK CSV-to-table works on web (picker + bytes through the session
registry — was std::fs, silently dead); COLORSCHEME accepts System
(prefers-color-scheme on web, AppsUseLightTheme on Windows).
Decode accounting, made honest per the fix-of-fix review: into_rgba8
allocates the RGBA destination while the native buffer is alive for
every non-Rgba8 layout (L8 5, La8 6, Rgb8 7, L16 6, La16 8 B/px
peaks — the formula now says so), GIF bills the screen+frame
coexistence at 8 B/px, and TIFF drops the 3x multipliers both ways —
tiff 0.11 splits the given budget between frame and scratch (a total
ceiling), so the old double-billing refused honest 16-bit GeoTIFFs
~2.25x early while admitting hostile chunk transients at 3x.
(cherry picked from commit 2c38de53)
WBLOCK, SAVEALL, and web ARCHIVE now serialize through the Web Worker
like SAVE/AUTOSAVE: prepare on the main thread, writer pass on the
worker, inline fallback on any worker failure. SAVEALL clears each
tab's dirty flag under the same unchanged-tab race guard the single
save uses; ARCHIVE assembles the ZIP in the completion handler so the
transmittal matches the snapshot taken at command time.
The review of the previous fix commit found the collision refusal
still REPLACED the registry bytes — the exact silent retargeting it
was meant to prevent. The refusal now keeps the old registration, the
extraction settings picker reports refused picks in the wizard's error
slot (previously silent, and the stale collision flag could surface as
a wrong-file warning on an unrelated browse), and the xref registry's
same-name ambiguity is documented as a browser fundamental (native
distinguishes by folder): newest registration wins consistently for
resolution, ARCHIVE, and XRELOAD — matching what the drawing displays.
Also: the Quit pending-close survives a successful web tab-save
(continue the quit instead of dropping it), the last ZIP64 sentinel
(central size) is rejected like the other four, and the new behaviors
gained regression tests (collision keeps old bytes, registry eviction,
including the deadlock fix for the guard-scoping that test exposed).
(cherry picked from commit b635d56c)
Ported onto main (#1717 review): ARCHIVE and SAVEALL serialize
document_for_save() like a single web Save; the ZIP is built with the
zip crate; WBLOCK keeps its native background-task title.
Full verification of the XREF/data/ARCHIVE/worker wave (three
reviewers, one forensic) found no blockers and no crossfire damage;
five majors and several minors are fixed here.
- ARCHIVE now packages XREFs: the bytes registry added by the same
commit is consulted (the in-code 'no xref store exists' comment was
false within the commit), and the drawing is packaged only after
the full save preparation — without it kernel solids shipped
without their ACIS data.
- PendingClose stores the stable tab id instead of a vector index:
the web save now completes asynchronously, and closing a lower tab
during the serialization window shifted indices — closing the WRONG
tab, or panicking on a stale one. All producers and consumers
resolve the id at use.
- The xref bytes registry is capped (6 entries, oldest evicted): every
open, drop, and pick registered full drawing bytes with no bound —
an OOM waiting to happen. Reopened recents register too, so any
entry path can serve as another drawing's xref.
- A re-picked data-link source with the same name but different bytes
no longer silently replaces the first (the browser hands back bare
names, so two same-named files collided and every reference read
the newer pick): the pick is refused and the user is told why.
- The unresolved-xref warning lists file names (what to drop on the
page), not internal block names; the ZIP writer refused the ZIP64
sentinel values (0xFFFF counts, 0xFFFFFFFF sizes/offsets) instead
of emitting archives that send strict readers hunting for a ZIP64
EOCD that is absent; docs note the worker-side saves.
Known follow-ups documented, not fixed here: the serde-skipped
ExtendedEntity/CadDocument raw bytes still drop on worker crossings
(needs codec accessors — upstream), and WBLOCK/SAVEALL/ARCHIVE
still serialize inline (the worker route is a small follow-up).
(cherry picked from commit 6f429f24)
Ported onto main (#1717 review): main already keys PendingClose by tab
id, so those hunks stay as on main; the ZIP64 guard is moot with the zip
crate; the unresolved-xref names split on both path separators, since
Path does not split Windows paths in the browser build.
The last four big web-vs-desktop gaps.
XREFs: XATTACH reads the picked drawing's bytes and registers them
name-keyed (the image/PDF-underlay pattern), pre-parses on the web
worker, and the commit merge produces the same xref block flow as
native. Opened drawings resolve xrefs from the registry (trailing-name
match) before cache build; unresolved references produce ONE warning
listing the names and the fix — drop the referenced files on the page
(drops and picker opens now register their bytes) and reopen or
XRELOAD. XRELOAD works off the registry on unsaved drawings too.
Data Link & Extraction: spreadsheet links read picked xlsx/csv bytes
(calamine from slices / CSV from string) through a session registry,
so preview, refresh, and table-insert work on web; extraction takes
external drawings via a multi-file picker parsed on the worker, and
outputs CSV/TXT/.dxex via download_bytes. The disabled 'Add folder'
button explains why.
ARCHIVE/ETRANSMIT: assembles the drawing plus registered images, PDF
underlays, and session plot tables into a ZIP delivered as
{stem}_transmit.zip; skipped dependencies are reported by name.
Save/autosave off the UI thread: the parse worker gains a serialize
action (protocol v5) — the document is prepared once on the main
thread (clone, styles, dimension bake), then the DWG/DXF writer pass,
the dominant cost, runs on the worker; any worker failure falls back
to inline serialization with the identical shared implementation.
The save path also clears the dirty flag only when the tab didn't
change mid-write, and the runtime-fields sidecar now carries
graphic_data, fixing a pre-existing loss of raw DWG round-trip bytes
on web-opened documents.
(cherry picked from commit 2e100634)
Ported onto main (#1717 review): the new ocs_save crate builds on the
pinned codec; the hand-written ZIP writer is replaced by the zip crate
already in the tree; ARCHIVE packs registered xref bytes too and
serializes document_for_save() like a web Save; the web save prepares
document_for_save() (prepare_document_for_save now takes the copy by
value, so no second clone); the wasm resolve_path consults the xref
registry, so every reference lookup — not just resolve — finds dropped
files; XRELOAD keeps main's undo, unload and stale-baseline handling;
native data extraction streams the source drawings one at a time.
A fresh web-vs-desktop audit found the remaining gaps; this closes the
top ten.
Raster images: IMAGE attach read the picked file via image::open on a
name-only path (dead on wasm), and raster references inside opened
drawings decoded the same way. Picked bytes are now registered in a
name-keyed store (the PDF-underlay pattern), decoding runs from memory,
and dropped .png/.jpg/.bmp/.tif files register by name so unresolved
references in opened drawings re-resolve and render (and export to PDF).
Command gaps fixed with the bytes-at-pick / download_bytes pattern:
- WBLOCK now downloads the extracted block instead of failing on fs.
- SAVEALL saves every dirty tab instead of printing a no-op message.
- SCRIPT picks and reads the .scr file through the browser picker.
- CENTERLTYPEFILE picks the .lin/.dnl file and populates from text.
- Custom .ctb tables picked on web now parse, register for the
session, appear in the plot dialog list, and apply (load_named
previously returned builtin-only on wasm).
- LAYTRANS 'Load standards file' parses the picked drawing on the
existing web worker.
- INSERT 'from file' in the block palette parses picked bytes and
feeds the shared import path.
Text fidelity: TTF-named styles rendered as thin stroke glyphs on web
because the font database was empty. Fetched Noto faces are now
registered into it with a family alias table (Arial, Times New Roman,
Cambria, ... -> Noto Sans/Serif), so those styles render filled, shape,
export to PDF as vector fills, and appear in the style picker.
ViewCube labels request semibold again on web.
docs/native-vs-web.md: the hatch and font rows were stale (both work on
web now), the GPU row claimed WebGPU is used where available (the
backend is pinned to OpenGL), and the parallelism row missed the parse
worker — all corrected.
(cherry picked from commit c643a10e)
Ported onto main (#1717 review): conflicts resolved toward main — the
font-file lookup, PDF searchable text, purge service, block palette and
plot-style copy stay as they are on main; the web pieces (font registry
and aliases, session plot styles, SCRIPT/SAVEALL/CENTERLTYPEFILE picks,
block-from-file on the web) are layered on top.
Restoring a named view gives the model viewport the view's visual style
(the closest render mode), and a 2D wireframe viewport shows no
background, as in the reference.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Color, Gradient and Image at the background prompt open a Background
dialog (None / Solid / Gradient / Image, preview, solid colour, two- or
three-colour gradient with rotation, image file with position and
scale). Apply links the view to a new background object in
ACAD_BACKGROUND; restoring a view gives the model viewport a copy of
it (or none), and saving a view copies the viewport's background.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The command left its sources selected when DELOBJ keeps them, so the
next command took them as its preselection; the reference clears the
selection after REGION.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
new src/scene/block_service.rs (references, delete, rename, purge candidates, name validation, one error type and message). The command-line RENAME, palette Remove, plugin API, control/MCP block_delete and PURGE all use it. Layout, xref, dynamic-block, anonymous and open-in-editor records are protected; PURGE removes an anonymous block only when nothing references it. PROTOCOL CHANGE: control/MCP block_delete refuses a referenced block unless force=true (erases referencing INSERTs in one undo step). New REST route DELETE /api/v1/blocks/{name}?force=true. MCP tool digest re-pinned. Undo labels are Delete block X, Rename block X to Y and Purge.
world = insert_point + Rot * Scale * (P - base_point). Attribute placement, EXPLODE, XCLIP storage, REFEDIT's working copy, the UCS reframe of attributes and the dynamic-block visibility grip ignored the base point and were offset by Rot*Scale*base. They now share insert_transform_with_base. Creation stores a ZERO base and redefine resets it; a no-op redefine moves nothing; the Block Definition dialog prefills the base from the definition. XCLIP filters stored by older builds keep their old displacement.
EXPORTSVG left the plot dialog's SVG device on, so a later EXPORTPDF still
offered a .svg file. The SVG save dialog and plot button texts had no
catalog entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Hakan Seven