Circle and ellipse shaders scaled the pattern length by the linetype
scale (PSLTSCALE in a viewport, annotation scale in model) but not the
dash and gap elements, so a dashed arc broke into dots.
Fixes#1644
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The paste kernel added every entity to model space. It now takes the
space a new entity goes to: the block being edited, a layout's paper
space when no viewport is active, or model space.
Fixes#1652
Co-Authored-By: Claude Opus 5.5 <[email protected]>
LayerTransparencyEdit applied without begin/commit_layer_undo, so the edit was permanent while every sibling arm is undoable. Mirrors the color arm inside the non-empty guard. Test: layer_transparency_edit_pushes_undo asserts the entry plus undo-restores (RED first). Full suite: 1991 passed / 0 failed / 25 ignored.
Conflicts were additions on both sides, kept together: the Count palette
and Sheet Set toggles next to the Graphic Attributes toggle in the ribbon,
main's new locale groups and catalog entries next to graphic-attributes,
and module declarations. The palette code follows main's crate renames
(acadrust -> codec, cadkernel -> kernel).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
- Colour swatches carry no *VARIES* or ByBlock text; the L / B / C / V
button already shows that.
- A separator sits between "Create Layer with active settings" and the
"Create fills on the current layer" checkbox.
- The linetype scale field is a plain text field like the Properties
panel: the first click selects its value, Enter applies it (decimal
comma and expressions accepted) instead of repeating the last command.
This drops the iced_aw number_input feature again.
- Undo/redo name fill changes "Fill change" and linetype changes
"Linetype", in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
- Cargo: drop the fork patches; codec 8e93175, kernel 0665fc9, graph
3b91e67 in every manifest and lock.
- A swept surface's expression link is written through set_entity_xdata,
so OCS_SWEEP_EXPRESSION has its APPID record and the record its handle.
- Applying the whole named-parameter table also rebuilds the swept
surfaces linked to expressions, not only a single-row edit.
- swept_surface_entity keeps its doc comment.
- The native-constraint tests find a scope's network through its own
dictionary, where it is now stored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The hatch pattern picker takes its messages as one PatternPickerMessages
struct instead of eight arguments.
- The palette's fill index is keyed on the scene's geometry epoch alone;
epochs are unique across scenes, so the scene address is not needed.
- The ribbon lineweight handler is an on_ribbon_lineweight_changed method,
used by the palette instead of a recursive update() call.
- The 430-line palette test is split into eight focused tests with shared
helpers; no checks were dropped.
- Palette, gradient editor, prompts, messages and undo labels go through
t!/tf!. The 33 new strings are in a graphic-attributes Fluent group in
all 21 locales; "[Yes / No] <Yes>", ByLayer and ByBlock stay English.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
- The palette view looks fills up through an index of associative fills
that is rebuilt only when the scene's geometry epoch changes, instead
of scanning the drawing twice per frame. The gradient previews are
cached and rebuilt only when the gradient changes.
- New fills go to the layer of the filled object. A checkbox in the
palette menu ("Create fills on the current layer") restores the HATCH
behaviour and is saved in the config. Objects on locked layers are
skipped with a message.
- The palette is no longer part of the default dock layout; it is docked
below Properties the first time it is shown and keeps a place the user
chose. The original dock test is restored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
- Revert formatting, import/module reordering and unrelated rewrites
outside the feature (command.rs, style.rs, paper.rs, view/mod.rs,
properties.rs, dialog.rs, ValuePromptCommand); the new SVG icons stay.
- Move the palette logic out of dialog.rs into update/graphic_attributes.rs.
- Replace 14 loose app fields and ~50 Message variants by
GraphicAttributesState (one Menu enum for the open drop-down) and a
nested GraphicAttributesMsg / GradientMsg, like BlockPaletteMsg.
- Share the selection -> line/fill handles -> unlocked edit path, reuse
valid_block_name, the ribbon lineweight handler and fill_handles, and
drop the unused GradientColorToggle, color_open and LineLinetypeScaleInput.
- Linetype scale accepts any positive value (e.g. ISO pen widths 0.13,
0.18, 0.25, 0.35) instead of rounding to 0.1 with a 0.1 minimum.
- Closing open boundaries and creating the fill is one undo step.
- The close prompt also answers typed Y/N + Enter, a bare Enter (Yes)
and Escape (cancel), not only the option buttons.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
A closed 3D polyline profile that does not lie in one plane sweeps a
surface with the reference's refusals. Swept surfaces made with an
Expression scale or twist follow the named parameters, and reference
surfaces linked through their associative action are picked up on open.
Saving keeps the associative actions the constraint graph does not
rebuild and stores each scope network through its own dictionary.
Kernel 23138fc, codec 64fe2a6.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- An open path is swept from its end nearest the pick point (in plan), as
the reference does; the record keeps the original path and the placed
frame marks the start.
- Kernel from ramox81/cadkernel 1df75f5: one face per path run for
twisted, scaled and spline sweeps, placed records swept from the placed
end, end caps without pcurves.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The refused-path message split its format string across a raw line
break; it uses \n. The reference-length and new-length prompts SWEEP no
longer shows leave the catalog and all 21 locales. Lines past the width
limit in the UPDATEFIELD and automation select changes are wrapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Eight messages with %{name} arguments went through the positional
formatter, which printed "%3" for a count, and their catalog entries
held %__ocs_fmt_N__ where the named form is expected. They take named
arguments now, and the entries — and those of the selection and HATCHEDIT
prompts with the same fault — use __ocs_arg_<name>__.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Ctrl+click on a composite selects it with the solid under the cursor as
the one its palette and grips edit: the solid whose own surface passes
through the picked point. With its history shown, a composite draws the
edges of the solids its booleans joined, each where it sits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
grips lists the selection's grips; grip_drag moves one to a world point
through the viewport's own grip gesture with snaps, ortho and polar off;
click presses the left button where a world point shows, optionally with
Ctrl and/or Shift held.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With SOLIDHIST on, UNION, SUBTRACT and INTERSECT no longer reduce the
result's history to a frozen body: each solid's history joins the
result's under a boolean step, in the order the result applied them.
The Properties palette lists a composite's solids under Operand; the one
chosen shows its own geometry rows and grips, placed where it sits in
the composite, and editing it replays the whole tree. A composite read
from a file keeps its saved body; the tree is replayed only on edits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Scale and Twist take an Expression evaluated with the drawing's
parameters; invalid input prints the reference message and asks again.
- The scale and twist prompts use the reference wording and defaults.
- The SWEEP prompts and refusal messages are in the locale catalog with
translations in every locale.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- 3D polyline profiles are recorded as wire bodies, like 3D polyline paths.
- Refused sweeps print the modeling error code and "Unable to sweep N
selected objects."; a scaled sweep rejects closed and cornered spatial
paths with the reference messages and asks for the path again.
- Scale > Reference asks for start and end reference lengths (start / end).
- Bank stays on for later sweeps until a twist angle is entered.
- Refused twist/scale edits in Properties print the modeling error code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Before a grip is picked, the crosshair now jumps to the grip under it, so
the click lands where the marker shows.
Discussion #1557
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The no-selection panel showed only the AC code. It now reads e.g.
"AC1032 (2018+)", from the version the file was opened as.
Discussion #1442
Co-Authored-By: Claude Opus 5.5 <[email protected]>
An aggregate of irregular stones on a 25.4 tile, built from edges whose
slopes repeat on the tile so every stone closes.
Discussion #1533
Co-Authored-By: Claude Opus 5.5 <[email protected]>
3DROTATE (ROTATE3D) took the drawing's rotation path, so a polyline only
turned in its own plane. It now asks for a base point, an axis — X, Y, Z
or a second point — and an angle, and rotates the selection about that
axis in space.
Fixes#1641
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The dimension's own block parts were mirrored with their text, so the
measurement read backwards. Text orientation is kept under reflection,
the same as TEXT and MTEXT with MIRRTEXT off.
Fixes#1639
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Center and Quadrant found nothing on a polyline's bulge segments: the
lightweight and heavy polylines carried no snap points for them, and a
polyline split into several wires kept its points on one piece whose box
the others' never reached. Each arc segment now carries its centre and
quadrants, hovering the segment offers its centre, and a wire's box
covers its snap points.
Fixes#1640
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DimensionPreview drew identical generic triangles regardless of dimblk/dimblk1/dimblk2. It now resolves each end through the shared arrow_from_block_name mapping (widened to pub(crate)) and draws per-end glyphs, keeping DIMTSZ tick precedence. Tests: arrow_name_mapping_covers_preview_kinds pins the shared contract; 2 preview_arrow_tests pin per-end resolution (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
DsSetHandle for the first arrowhead also overwrote the second, destroying split-arrowhead configurations. The second write was a drive-by from overhaul 25515fa3; the Dimsah toggle has its own null-guarded init. Test: dimblk1_pick_leaves_dimblk2_alone pins per-end independence (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
