With the form open a drag on the mesh grabs the node under the press and
moves it in the screen plane; Alt + scroll sizes the radius. The view draws
the original edges as a ghost under the moved ones, coloured by how each
element's scaled Jacobian changed, and the sphere; the form shows the region's
numbers live. Release runs mesh.node.move (one undo step), Esc cancels.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The grabbed nodes (listed, on B-rep faces, or a sphere's) move; the nodes
within the radius follow by a falloff or harmonically; nodes stay on the
geometry as Relax Nodes moves them; the move is scaled back until no element
inverts. The reply gives the region's scaled Jacobian before and after and the
elements that got worse and better. One undo step. Toolbar entry Move Nodes
(Mesh, Improve) with its own icon.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
relax::move_weights gives each node its share of a displacement (the grabbed
nodes all of it, the nodes within the radius strength x falloff, or the
harmonic function of the element-edge graph, zero beyond the radius and at
held nodes); relax::move_nodes applies it as the relaxation's constraints let
each node move (faces in UV, edges along, vertices held), scaled back by
bisection until no valid element inverts, and reports each element's scaled
Jacobian before and after.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The dihedral range and mesh.quality's scaled Jacobian were both right:
they are computed by the same function on the same final corners (tet4
and tet10 give identical numbers), but a dihedral range does not bound
the corner scaled Jacobian. A needle has dihedral angles near 60 and 90
degrees and a nearly flat apex corner. Before 417c0c88 sphere-on-plate
at size 4 had dihedrals 36.3-141.6 and 106 needles below SJ 0.2 (min
0.095); now 36.0-137.6 and min SJ 0.351.
The mesher's report now carries min_scaled_jacobian so it cannot read
as all-good while needles remain.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The improvement objective was the smallest dihedral sine, which misses
needles: every dihedral angle fine while a corner is nearly flat, so
the corpus meshes had scaled Jacobians down to 0.01-0.07. The objective
is now the smaller of the dihedral sine and the scaled Jacobian at the
worst corner (the measure analysts check, Knupp 2001), weighted so a
Jacobian of 0.3 (the skill's limit) counts as a 30 degree dihedral
angle (the schedule's target): the Jacobian decides only near that
limit. The existing edge removal, multi-face removal, smoothing and
insertion then remove the needles.
Skill tet10 min SJ: sphere-on-plate 0.092 -> 0.335, filleted-bracket
0.021 -> 0.318 (both pass, nothing marked). Default-size tet10:
thin-ribs 0.240, shallow-groove 0.321, rounded-box 0.311.
The strong-relaxation test relaxes below 0.45: nothing is left below
0.3. Literature note in docs/meshing/literature.md.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Where a tie's secondary surface meets a boundary condition or an
axis-aligned symmetry plane (a crosspoint), the secondary node's motion
is already prescribed and its mortar row can only constrain main
degrees of freedom. Its weights on main nodes off the boundary do not
vanish (the dual basis spreads over the node's faces), so after the
substitutions a small but real constraint is left: 1.3e-6 of the
coefficients that cancelled to give it on the tied hex-tet bar with
the needle-aware tet mesh (round-off would be ~1e-14; the geometry is
exact). It was refused as a near repeat, which made the tied bar
depend on how the tet faces fell. It is now dropped (the tie is then
off by that fraction at the crosspoint), after checking it does not
contradict the prescribed values. A near repeat on a secondary degree
of freedom another constraint eliminated (a node secondary in two
ties) is still refused (#389). Dropping every held secondary node's
row instead fails the tie patch test, so only near repeats go.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
RUSTSEC-2026-0367/0368/0369 are in ZipArchive::extract and
ZipStreamReader::extract. Our zip 9 is updated to the fixed 9.0.4. zip 3
comes only through the pinned solidcraft-io, which never calls extract
(3MF parts are read by name), so the three are ignored with that reason
until SolidCraft moves to a fixed zip.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Owner's rule (#438): move the bad nodes, interpolate, keep the morph as long as no
element inverts (guards "valid", the default); the old guards stay as "strict". The
run keeps its best round (highest smallest scaled Jacobian, then fewest elements below
the threshold, then highest mean) and never ends below the start. Default reach five
mean edge lengths of the bad elements (was three); on the Pi 5 base reach 3, 5 and 7
end at the same quality, 5 moving fewer nodes than 7 while leaving none below 0.7.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Deleting a cap tetrahedron (two boundary faces of one B-rep face) gives each of its
two other neighbours a boundary face; a neighbour that had three was left with every
face on the boundary, joined to the mesh by its vertices alone. On Linux the dome on
a plate (cmd::plan::decompose::tests::a_dome_on_a_plate...) got one and the static
solve found the stiffness singular. The kernel's tessellation and sphere parameters
differ in their last bits between macOS and Linux (SolidCraft, outside this repo);
given the same input the tet mesher gives the same mesh on both (checked by replaying
Linux's surface and spheres on macOS, which reproduced the floating tetrahedron).
The deletion now refuses when a neighbour would float, and the linear validity gate
fails a mesh with a tetrahedron that shares no face with the rest, saying so.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Holes by diameter, fillets by radius, chamfers by distance and bosses by height below
thresholds, or under a geometry.check finding; the reply panel switches each feature
off and on (geometry.defeature) and defeatures the whole proposal.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
In the max-min phase a valid element's term q^-16 reached 1e96 as q -> 0+, far above
an invalid element's 2e8, so the descent kept elements inverted rather than pass
through flat: the distorted plate stayed tangled (4 invalid) once its mesh was the
same on every platform. The shape term now continues as its tangent line below
q = 0.3 (finite, steep) and an invalid element costs 1e11, above any valid one.
Adds a test that the plate's mesh, its perturbation and the strong relaxation are
the same bits with 1 and 4 threads and match a fingerprint taken on macOS (CI checks
it on Linux).
Part of #438.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The system maths library's sin, cos, atan2, log … are not correctly rounded and differ
between platforms: mesh.hex.generate gave the plate of the strong-relax test a different
mesh on Linux than on macOS (nodes from 2809 on), so the test passed on a Mac and failed
in CI. Every transcendental call in fieldcraft-mesh now goes through the libm crate (a
pure-Rust port of musl's), which gives the same bits everywhere.
Part of #438.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Suppresses the SolidCraft features named (holes filled, fillets and chamfers back to
their sharp edges, bosses removed) and rebuilds the design; a feature that cannot be
suppressed alone is merged into its neighbour for meshing only. Kept in the model,
replayed on open, undoable; geometry.defeature.delete turns them back on.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
SolidCraft lists a solid's faces in a different order from run to run
(the rounded box, for one), which reordered the triangle soup and the
face tags with every coordinate the same; welding keeps the first copy
it meets and every later stage visits ids in order, so the tet mesh
changed between runs. CanonicalSoup sorts the triangles by their
coordinates, numbers vertices by first use and face tags by first
appearance, and maps the tags back; mesh.tet.generate and the corpus
use it.
Tests: the washer's tet10 mesh has a fixed fingerprint (identical on
arm64 and x86-64 builds); a reordered, renumbered input gives the same
mesh; heavy: rounded-box and filleted-bracket mesh bit for bit the same
on repeated runs and with 1 and 8 threads.
The bracket oracle cases stay unfrozen: SolidCraft's tessellation
itself differs in the last bits between arm64 and x86-64. The coarse
case moves to 203.6 MPa with the canonical order; its band is 5%.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The platform maths libraries' atan2 and cbrt differ in the last bits
between macOS and glibc, so the dihedral angles and the shape measure a
mesh reports did too. The crate's own versions use + - * / and sqrt
only (correctly rounded everywhere) and agree with the platform's to a
few ulps.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Faces and bodies under a size control are tinted, a box drawn as its
edges and a sphere as a translucent ball, each labelled with its name
and size. The Local Size form takes the selected faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.size.set adds a size control on faces, bodies, a box or a sphere;
mesh.size.growth sets the growth rate; mesh.size.clear and
mesh.size.list. The tet mesher bakes the controls into its graded field,
the hex meshers, cells and the octree take the graded RegionSize, and
the block projection and mesh plans divide their edges by it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
SizeField::range gives a field's smallest and largest size. The octree
starts its root cells at the largest instead of the size at the part's
centre, and refuses before building when the smallest needs more levels
than max_depth.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The thinnest wall (measured to a facing wall) and narrowest patch give the cell size the grid
needs; the requested size refined that deep comes first, a root shrunk so one level fewer is
exact second; beyond the levels or cells allowed meshing fails at once naming the wall, levels and
cells. max_depth is a cap (default 4); rebuilds stay within the planned levels; lattice positions
no longer depend on the lattice depth; the report gives root size, levels, wall, patch and cells
per level before and after closure.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A crease inside one face whose ends are not on other features (a tessellation crease across the
crank's r1.5 bore fillets) bounded nothing, so its open ends were corners no region border could
reach and the feature map failed on every build. Patch widths now count bounding curves only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.face.split {name, face, datum} records a face split; it is
applied after the merges whenever the design is opened or cut again,
follows its datum (which it holds), undoes, and is saved with the
model. geometry.face.split.delete removes it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
#519 delivered tet-hex transitions through mesh.cells and removed the
'coming soon' mesh.transition catalogue entry, leaving its icon without an
entry (icons::tests::every_catalogue_entry_has_an_icon_and_every_icon_an_entry).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A merged face on several surfaces (a sliver absorbed into its neighbour)
had no exact surface, so the projection target fell back to its
triangles: flat curvature probes gave fewer divisions round the boss and
the enclosure base's symmetric mesh dropped from 0.70 to 0.51 once its
absorbs reached the cells. The target now projects a point of such a
face onto the exact surface of the B-rep piece it is on, trimmed to that
piece (Tessellation::with_pieces, Shape::tessellate_pieces); node
relaxation slides on it the same way.
Test from commands: the enclosure base's four slivers absorbed, meshed
whole and by symmetry, the absorbs kept in every cell.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A merge on `Base` failed with "no body `Base`" as soon as partitions cut
the body into cells (mesh.plan.apply's symmetry and corner cuts), so the
plan's cells and the body as opened silently lost every absorb and merge.
Each cell now takes the merge where the pieces of its faces touch (named
after the face kept, else merge:<name>[#k]), and the body as opened keeps
its merges whether partitions cut it or not.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The face's triangles are cut along the plane, split:<name>:a on its
negative side and :b on the other, both on the face's surface, with the
cut as a new edge between them and the face's edges cut where the plane
crosses them. Applied after the merges; the B-rep is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Plan before geometry.check (its size), mesh.plan.apply's own symmetry and the plan's saved
name, the fallback order, touching bodies, tet aspect ratio, undoing a relaxation that leaves
its region worse, and merging the cells of a split part.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
For a body with features the sweep cannot mesh, mesh.plan replies a
decomposition: the cuts that box those features into one cell, the region,
and the commands that make the cuts and mesh the cells with pyramids. A plate
with a joined dome: 5 cuts, 17 hex cells swept together, the dome cell tet,
valid and conforming, end displacement in tension within 0.4% of all-tet.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
With "transition": "pyramid" (the default; "tie" keeps the old join) a tet
cell is meshed after the hex cells, with a pyramid on every hex face of its
cuts and its tetrahedra on the pyramids' sides: one conforming mesh, no tie.
Where it cannot be built the cell says why (no_pyramids) and is tied. The
apex height is 0.4 of the quad's edge, so pyramids on faces meeting at a
right angle do not cross.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
transition::pyramid_surface puts a pyramid on every hex interface quad and
builds the tet region's surface closed by the pyramid sides, re-stitching the
neighbouring faces to the hex rim nodes. QualityOptions::frozen_faces keeps
those sides exactly (TetComplex refuses changes that remove or add a frozen
face; their vertices are corners), and apex_points checks the result.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The owner's direction: bad nodes move to better places, the nodes within a reach follow by
the graph Laplacian's harmonic extension, edges held, nothing outside the reach moves.
mesh.node.relax strong mode takes below and reach and reports each round.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The extrude/revolve cross-section took both ends of every B-rep edge as curve ends. A closed
edge without a vertex on it (a hole's rim after geometry.faces.merge of its halves) starts
wherever its chain was picked up, the old seam vertex, so that point stayed a curve end and a
node column stayed on the merged boundary. Only open edges' ends (and the B-rep vertices) are
curve ends now; the layout and interval assignment place the rim's nodes.
The hex test runs on a square plate and asserts the seams carry exactly as many nodes as the
same lines turned a quarter round the hole (10 and 10; before 5 and 10): the corner layout
puts arc-midpoint nodes there by symmetry, so 0 is not the right target.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A five-node pyramid, the conforming transition between a hexahedron's face
and tetrahedra: Bedrosian's rational shape functions with a collapsed (Duffy)
Gauss rule, a certified Jacobian on the base square with exact volume, a
scaled Jacobian, C3D5 / CPYRAM / LS-DYNA degenerate solid, VTK_PYRAMID and
the binary mesh code 13. A distorted hex8-pyramid5-tet4 transition mesh
passes the patch test and uniaxial tension exactly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.stitch {name, surface, tolerance} records a stitch; the
surfaces keep what was read (TaggedSurface::original) and are stitched
again from it whenever a surface is imported, the model opened, or a
stitch added or deleted (geometry.stitch.delete). Opening a model also
warns about merges that no longer apply.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Open points closer than the tolerance become one point and a point on
an open edge near the inside of another splits that edge's triangle;
edges that are not open are never touched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The whole cell is meshed with its layout split at each candidate cut and
the sheets there held planar (ProjectOptions::planes); the corner of the
best is added as the low cell's mesh with the whole mesh's face tags,
mirrored, and the middle meshed round it. Accepted only when the corner
and the middle are no worse than the cell meshed whole; else the cell is
meshed whole and corners.skipped says why.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
With symmetry, when the fundamental cell's two ends along another in-plane
axis are alike (layout planes and surface mirror-symmetric), the cell is
cut midway into the next block sheet and at its image; the low corner is
meshed with its blocks, mirrored onto the high one, and the middle meshed
with both cut faces fixed (#490). A plan cell's cut faces another cell's
mesh covers are taken as given. corners: false opts out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A face merge may keep one of its faces' names (Merge::into, model
FaceMerge::into): absorbing a tiny face leaves the neighbour by its own
name, so sets on it still select it. Shape::absorbing_neighbour finds
the face a tiny one shares the longest edges with. geometry.face.absorb
absorbs one face (into a named or the best neighbour) or, from_check,
every small and sliver face the last geometry.check marked; check marks
now carry the small face they found.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.faces.merge {name, faces} records a face merge in the model;
it is applied after the partitions whenever the design is opened or cut
again, undoes through the journal and is saved with the model. Meshers,
mesh.plan (features and rings see merge:<name>; a merged face is
prismatic when its B-rep faces are), checks and the viewport see one
face, drawn in the warm colour. geometry.faces.merge.delete removes it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A Merge makes adjacent faces of a body one virtual face in what meshers
take from it (tessellation tags, faces, surfaces, edge and vertex names):
the edges inside it are dropped and the pieces of an edge it leaves are
joined; the B-rep is unchanged. Design::merged applies merges after the
partitions and lists the ones that fail as feature errors.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A patch of quads already meshed on a face of the body (a neighbour's mesh)
is matched to the block faces on it: block vertices to its nodes (its
singular nodes first, then along its grid lines), block edges along its
grid lines, faces filled quad by quad. Those faces take the patch's
divisions and nodes, held through smoothing. mesh.hex.project takes
"fixed": [face names] and builds the patch from other bodies' meshes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The reply's untagged_faces lists every face of the plan's bodies no
element face carries; the acceptance checks require it empty, and a
symmetric filleted base checks a set by every face of every cell (#494).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The image's face names came from one sample per source face (the first
element face's centre), so a source face whose sampled element face was
off it, or a sliver, mapped wrong and the true image face went untagged.
Each source face now maps to the image faces its own reflection covers,
and each element face to the nearest of those.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
project_trimmed accepted the exact surface's point up to a fifth of the
nearest triangle's median edge off the face: on a tall fillet piece
(triangles 30 mm long) that let a point on a sibling piece of the same
cylinder count as on it, so every quad round the corner took the first
piece's name. The slack is now the triangle's own chordal gap to the
surface, doubled.
A face narrower than the elements (the sliver a corner boss leaves of the
inner fillet) gets one row of the quads it runs through, from the
neighbour with the most quads left. Tessellation::nearest_face finds the
face nearest a point.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
When the grid layout does not fit a swept body (sides at an angle to the axes, root arcs where
an arm meets its bosses), mesh.plan tries the ring-and-pillow layout (cmd/plan/pillow.rs): each
boss is an annulus from its bore or pedal hole to its circle through every level, the arm a grid
carved a margin inside the outline and the bosses, with a pillow layer of blocks to the wall each
boundary face faces; a grid corner facing a boss and the outline gets a corner block reaching the
kink where the outline leaves the boss's circle. The old crank test (frame cuts) becomes the
heavy acceptance test at sizes 2.5, 3 and 4; the moved frame cut keeps a unit test.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
model.boundary_condition.symmetry takes a datum plane of any orientation,
finds the faces on it and reports the plane's unit normal when it is
inclined; the glyph draws a support along that normal. Verified: half a plate
cut on its diagonal with the plane deflects as the half mirrored across it
(6.7e-13), the mirror conforming on the plane.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
At an inclined plane's nodes the velocity along its normal is removed every
increment, from the components no prescribed velocity holds (planes meeting
at a node orthonormalized, so one pass is exact); a prescribed motion off the
plane is refused.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The symmetry condition takes any plane normal ({"normal": [nx, ny, nz]}).
An inclined one holds n·u = 0 and, at shell, beam and reference point
nodes, the rotations about the two in-plane axes: constraint rows the
implicit elimination already handles, its support forces reported as
reactions. Decks: Abaqus *EQUATION, Nastran MPC sets per subcase, LS-DYNA
*BOUNDARY_SPC in a *DEFINE_COORDINATE_SYSTEM along the normal.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The updater's release endpoint, docs, README, release notes and the Pages
URL point at the tangency-labs org. App IDs (io.github.jyviko.fieldcraft)
stay unchanged so installed copies keep their identity and settings.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Use selection puts the selected design faces in the form as faces, in
place of a sphere; Shift/Ctrl-click picks faces while the form is open,
and every click does once the form lists faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.node.relax takes faces: [{body, face}] (every node on those B-rep
faces and the nodes of the elements touching them, sliding on the faces)
and elements in its form; the undocumented-by-form set is dropped.
A schema test checks every top-level key a params doc names is accepted,
which also found mesh.hex.extrude normal, mesh.hex.project max_arc_angle
and mesh.plan.apply name missing from their forms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
engine::view::build (Style, Show, Palette) is the viewport's builder,
moved from ui-egui; ui-egui maps theme::Tokens onto a Palette and calls
it. Palette::LIGHT now equals the light theme's tokens. Test: the app's
scene and engine::view::frame's are identical for the same session.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The app keeps a capturer on its own device; ui.render draws with the
viewport's pipelines there, on the CPU with the reason otherwise, and
the reply names the renderer.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The window's paint callback (slots, prepare, paint) draws the sample,
its symbols and an overlay into the capture's offscreen pass; the
pixels equal Capturer::rgba's.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Capturer::rgba becomes offscreen() (sizes, error scopes, MSAA, depth,
read-back) plus finish() (background and labels), so another painter,
such as the window's paint callback, can draw into the same pass.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
With a user's partition on a symmetric body, applying the whole body's plan cut it again by its
symmetry plane and mirrored one cell, leaving the other half unmeshed ("the mirror images do not
reach cell Base/b/a"). Such a body is its cells: the symmetry is not used and the plan is refused
with the cells named, as the replay of the saved Pi 5 model shows.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
After geometry.partition cuts a body, the body is its cells: a projection plan of the whole body
could not open it and failed with "no body `Base` (open a design first)". It now names the cells
and says to plan and apply a cell (mesh.plan {"body": "Base/a"}) or delete the partitions. Tests
cover a design opened directly and a saved model opened again, partitioned after opening.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The drawing tests skipped silently without an adapter. Under
FIELDCRAFT_REQUIRE_GPU=1 they fail instead, and the snapshot and MCP
screenshot tests require a GPU renderer. CI runs them with
FIELDCRAFT_GPU=software on lavapipe.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
mesh.plan.apply finds the planes a projection plan's body is its own mirror image across
(through the middle of its extent, square to the sweep's in-plane axes, through no ring: every
triangle middle of its tessellation, a little inside and outside, has its mirror image inside and
outside alike). It cuts the body by them, plans and meshes the cell on their negative side, and
mirrors that mesh across each plane in turn (mesh.mirror, joined node to node on the planes), so
mirror-image regions mesh exactly alike. `symmetry: false` meshes the whole body.
A cell of a partitioned body is planned from the features that built its body, with the rings it
holds; a partitioned body is planned whole as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
