file.sample crank-arm: a 170 mm 6061-T6 crank built in SolidCraft
(crates/engine/samples/crank-arm.json), swept along z by mesh.hex.generate
as 7274 hex20 elements of 3 mm (scaled Jacobian min 0.17). The hex variant
drops the pocket floor fillet and boss chamfers, and its root arcs meet the
bosses 20 degrees off tangent so the arm's top face has no zero-angle cusp.
The square bore is fixed and 1500 N acts on the pedal hole; the faces are
picked by their surfaces, not their names. Its heavy test matches the root
bending stress to M/Z = 62.6 MPa within 3 % (0.3 % in practice).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample bracket-hex: the corpus bracket split into 30 SolidCraft cells,
meshed by mesh.hex.blocks as one conforming hex20 mesh of 3 mm, clamped at
the upright and loaded at the foot. The sample's script finds the clamp and
load faces in every cell that has them. Its test matches the tip deflection
of a fine tet10 solution within 1 % and checks the clamp carries the load.
Closes#166
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample heated-bracket: the corpus filleted bracket in steel, tet10, its
hole bores clamped, the upright's end held at 120 C and the rest cooled by
still air; one coupled temperature-displacement step. Its test checks the
temperatures against the heater and the air, then warms the bracket evenly,
clamps one hole, and matches the free thermal expansion alpha dT times the
distance from the hole along x.
Closes#165
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample flow-past: air at 25 mm/s past the upright L-bracket in a box of
2.5 mm lattice cells (Re 83), inlet, outlet, a no-slip floor and slip walls;
the fluid step reports the force on each named face. Its test holds the
drag coefficient on the upright's frontal area between 1 and 3.5 (2.3) and
the lattice's mass change under 1 %. No picture: the viewport does not draw
flow results yet (M12).
Part of #164 (its streamlines wait for a flow display in the viewport)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample rubber-seal: a gasket ring of hybrid hex8 elements in four
mapped quarter blocks, squeezed 2.5 mm between plates bonded to it
(nonlinear static, Mooney-Rivlin rubber). Its test frees the plates and
matches the closed form for incompressible uniaxial compression within 3 %,
and bounds the bonded ring's extra stiffness. The plates are prescribed
displacements until implicit contact (#161) can press it into a groove.
Closes#163
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample drop-test: an L-bracket standing on its foot (a SolidCraft script
in sample.rs) swept into hex8, falling 2 m onto a rigid floor tilted 15 deg;
explicit dynamics for 1 ms with gravity and plasticity. Its test checks the
mass against rho V, the impact speed sqrt(2 g h) and kinetic energy, the
energy balance and the momentum the floor takes. docs/examples.md starts
with it, and its picture is docs/media/examples/drop-test.png.
Closes#162
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An oracle case of uniaxial tension across a tie of non-matching meshes; the tie formulation
in docs/fem.md and the literature survey; ROADMAP M7 and parity updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An oracle case of a block pressed on another and slid with static and kinetic coefficients
(mu_k N carried once slipping), and the docs of the friction formulation; ROADMAP M7 and
parity updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
solve.nonlinear counts the slipping nodes, solve.probe gives a secondary node's shear traction
and slip, and the results display draws contact_shear and contact_slip, contact_status coding
stick and slip.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Two oracle cases: the contact patch test on non-matching meshes in small and finite sliding,
and Hertz's cylinder on a flat under force control (peak pressure, pressure distribution,
subsurface stress). docs/fem.md describes the formulation, the literature survey its papers;
ROADMAP M7 and parity are updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
solve.nonlinear summarises each contact (normal force, largest pressure, closed nodes, deepest
penetration, augmentations), solve.probe gives a secondary node's pressure, gap and status per
contact, and the results display draws contact_pressure, contact_gap and contact_status. The
contact commands, the catalogue and the model docs say what nonlinear static steps do with a
pair.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An explicit step may ask for mass scaling to a target time increment (on
a set, or the whole model): elements whose stable increment is below it
get the density that reaches it, with their lumped masses, frequency
bound and hourglass scales; adiabatic heating keeps the physical
density. The run reports the elements scaled, the added mass in all and
per section with its fraction, a warning, and the added mass's kinetic
energy in the energy account. Verified on a uniform bar scaled to twice
its increment (added mass 3×, increment doubled, a quarter of the
kinetic energy left to the physical mass). ROADMAP and parity note the
hyperelastic materials and mass scaling.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Neo-Hookean, Mooney–Rivlin and Yeoh materials in explicit dynamics, in
total form from the deformation gradient (objective by construction):
the one-point hex8 takes its mean F over the undeformed element and the
stress τ/J; tet4 takes the isochoric stress of its own F with the
average nodal pressure of the decoupled volumetric energy (Bonet–Burton
at finite strain). Each element's frequency bound follows the tangent's
largest normal stiffness. Small-displacement steps and thermal strain of
hyperelastic elements are refused by name.
Verified by uniaxial strain to λ = 1.5 of all three laws on hex8 and
tet4 against the material point (to rounding), and the oracle case
explicit-neo-hookean-implicit: a quasi-static explicit pull against the
implicit nonlinear solver (lateral contraction to 0.09%, stress to 0.03%).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Its values come from abaqus-docs.mit.edu, which returns 403 Forbidden outside MIT's network, so
they are not from a publicly accessible source. The section is kept aside for review.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A README section tabulates, per benchmark, the reference, the result the
Abaqus 2017 Benchmarks Guide publishes (element, mesh, error) and ours from
the oracle, with a cited source per value and notes where the rows are not
like for like. Linked from docs/verification.md.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
arc-shallow-arch: a sinusoidal arch of 40 × 2 × 1 hex20 under a sinusoidal dead load scaled to
the one-mode closed form's upper limit load: the upper limit point at 0.992 (−0.8 %), the lower
at 0.219 (0.8 % of the peak load) and exactly one negative eigenvalue between them. ROADMAP and
parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
NonlinearStatic.arc_length {constraint, max_load_factor, displacement_limit}: Riks–Crisfield
arc-length increments (cylindrical or spherical arc, tangent predictor signed by the angle
criterion, the constraint's quadratic root chosen by the angle with the last iterate), arcs
grown, shrunk and cut back as increments are. The converged state's tangent is factored for the
next predictor (LDLᵀ when indefinite); its negative eigenvalues are recorded per increment and
changes in their count are reported as limit or bifurcation points. Ends at the maximum load
factor, a displacement limit or the increment cap. Abaqus *STATIC, RIKS; LS-DYNA refuses it by
name; forms gain the arc-length group. A shallow arch of hex20 snaps through on the closed-form
path (1.9 %), both limit points found, inertia 0 → 1 → 0 between them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
NonlinearStatic.imperfection {step, mode, scale}: the buckling step's mode, scaled to a largest
component of `scale`, is added to the node coordinates before the step is solved, with a warning
naming it; Abaqus and LS-DYNA decks refuse it by name. A clamped–free column with its first mode
as imperfection under half its buckling load amplifies it by 1/(1 − α) within 2.8 %.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
buckle-euler-pinned and buckle-euler-cantilever (hex20 columns, −0.18 % from Euler with
Engesser's shear correction) and buckle-plate-square (a simply supported square plate, b/t =
100, −0.39 % from k = 4; the support and thickness choices in its README). ROADMAP and parity
updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Procedure::Buckle {modes, shift}: the step's loads as a linear preload, K_σ from its stresses,
and (K + λ K_σ) φ = 0 by block Lanczos in the K inner product: K⁻¹(−K_σ) on Cholesky without a
shift, the buckling transformation (K + σ K_σ)⁻¹ K on LDLᵀ with one, whose inertia counts the
load factors below σ (Grimes–Lewis–Simon 1994). Lanczos gains an operand and an eigenvalue map
(defaults keep frequency steps bit for bit) and reports converged negative eigenvalues. Results
are frequency results with a `buckling` part; modes display with their load factor.
solve.buckle (in the Static drop-down); Abaqus *BUCKLE, Nastran SOL 105 and LS-DYNA refuse it by
name. Euler columns of hex20 within 0.18 % of Engesser's load.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
CommandSpec::listing gives id, label, the parameter doc and the schema; MCP
list_commands, the control channel's engine.commands and the new
fieldcraft-cli commands --json use it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Segment-to-segment penalty contact between element faces: each secondary
face and each main face facing it are projected onto the secondary face's
plane, split into triangles, clipped (Sutherland–Hodgman) and integrated
with a three-point rule per sub-triangle (Puso–Laursen segmentation, the
penalty at the integration points as Fischer–Wriggers), so a uniform
pressure gives the consistent nodal forces on both meshes and the contact
patch test passes on non-matching meshes. Every contact runs both ways at
half the penalty: pairs with each surface as the secondary, general and
self contact face against face. A bucket grid of face boxes every
increment, faces integrated in parallel and their forces added in face
order: the same numbers on any thread count.
The penalty per area ε = s γ min(m/A)/Δt² comes from the lumped masses,
each node's directional area and the stable increment, bounded by
Gershgorin's row sums so contact never shortens the increment. Coulomb
friction with exponential decay by a regularised return map at the
secondary nodes; rigid walls take Coulomb impulses. Contact work and
friction dissipation join the energy balance; each contact reports its
peak force, first and last contact, deepest penetration, friction and the
nodes adjusted at the start (initial penetrations adjusted strain-free or
refused with the node, face and depth); a cap on contact faces.
Verified (crates/explicit/tests/contact.rs, tests/oracle/explicit-*):
colliding bars (2L/c +1.2%, ρcAv₀/2, KE kept to 0.005%, contact energy
back to 8e-5 of it), blocks sliding to a stop on a rigid wall and on a
plate under constant and decaying friction (0.005–0.2%), the patch test
(σ_zz uniform to 0.06%), two spheres colliding against Hertz (peak +2.3%,
duration −0.4%; the oracle case waits for a graded sphere mesher), a free
body untouched by general contact, determinism across threads. Oracle
measures gain `over` (ratios). Existing fixtures do not move.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Contact definitions on face sets: a pair (each surface's nodes against the
other's faces), general contact on a surface (self contact) or on every
exterior face of the solids; Coulomb friction with static and kinetic
coefficients and an exponential decay, a penalty scale and the choice to
adjust or refuse initially penetrating nodes, validated with caps. Rigid
walls of explicit steps gain friction. The check wants solid faces on
contact surfaces; sets used by a contact cannot be deleted.
fem::contact: the closest point of a triangle (Ericson) or a bilinear
quadrilateral (projected Newton) to a point, and a bucket grid of face
boxes for the global search, deterministic and bounded.
Commands interaction.contact.pair, .general, .edit, .delete and .find
(the touching parts of the mesh, with face sets and pairs made of them);
contacts in the model browser. Abaqus writes *SURFACE INTERACTION with
*FRICTION (exponential decay), *CONTACT PAIR and general *CONTACT; LS-DYNA
*CONTACT_AUTOMATIC_SURFACE_TO_SURFACE and _SINGLE_SURFACE with FS, FD, DC;
Nastran refuses contact by name. The implicit solver refuses contact by
name (M7); the explicit solver refuses it until the next commit.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
nl-hybrid-incompressible: 27 hybrid hex8 at ν = 0.4999 pulled to λ = 2 by a prescribed
displacement, against the compressible neo-Hookean closed form (1.4·10⁻⁹); its first
iterations need the LDLᵀ factorization. ROADMAP and parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A tangent that is not positive definite is factored by LDLᵀ (Cholesky first, one symbolic
factorization) instead of cutting the increment back; each iteration records the tangent's
negative eigenvalues and the summary warns when a converged state keeps some. A model that can
move freely is still an error at its first tangent, located by the undeformed Cholesky factor;
a singular tangent later is a cutback. Nearly incompressible hybrid hex8, hex20 and tet10 at
ν = 0.4999 under prescribed displacement now converge to the closed form.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A supernodal LDLᵀ on the Cholesky factor's symbolic factorization (ordering, supernodes, fill,
cap and parallel subtree tasks shared through a Symbolic and a generic driver; the Cholesky
numerics are unchanged bit for bit). Pivots by the bounded Bunch–Kaufman (rook) search of
Ashcraft, Grimes & Lewis among each supernode's columns (Schenk & Gärtner's supernode
Bunch–Kaufman), 1 × 1 and 2 × 2, right-looking panels whose trailing update reuses the tiled
Cholesky kernels with L D formed on the fly. Reports the inertia; a column without a pivot above
round-off is a located Singular error; NaN is refused. Symmetric::new picks Cholesky, LDLᵀ, or
Cholesky with an LDLᵀ fallback; solve_refined adds iterative refinement. 1.1–1.2× the Cholesky
time on a 140 000-equation hex8 pattern.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The desktop's ModelApp in a web page through eframe's web runner
(WebGPU, WebGL2 fallback, `?webgl` to force it), built with Trunk.
The browser services sit behind the UI's host-service seams: File >
Open uses the browser's file picker, dropped files are read
asynchronously, and both go into the page's files; Save, Save As and
Write Deck hand the written file out as a download. Autosaves go to the
recovery folder as on the desktop and are mirrored to local storage, so
File > Recover offers what a closed or crashed page left. `?sample=NAME`
opens a sample. A loading screen with the app icon, and a message
instead of the app when neither WebGPU nor WebGL2 is available.
`cargo xtask wasm` (and so `cargo xtask ci`) now checks fieldcraft-web
for wasm32 with the library crates. docs/web.md: running it locally,
what works in the browser and what does not.
Part of #119
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The browser has no file system a page can call synchronously. On wasm32,
fieldcraft_io::fs now reads and writes files kept in memory (memory.rs,
after SolidCraft's vfs): the web host puts picked and dropped files in
and takes out what commands wrote. The recovery folder works over the
same calls (list, remove, is_file), with in-memory entry locks and a
host-provided clock on wasm, so autosave and File > Recover work in the
browser as on the desktop. Native behaviour is unchanged.
Part of #119
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
OK on a mesher's form ran the command on the window thread: octree hex
on the bolted assembly froze the window for over a minute, with no
progress and no way to stop it. The tet and hex meshers' forms now run
their command as a background job on a copy of the session, as opening
a file and solving do: the window keeps drawing with the job's name and
Cancel, the form closes when the mesh is in and shows the error when it
is not. ui.dialog {run} stays synchronous for programmatic callers.
The new test walks a first-time user's path: Open picks a SolidCraft
design, Tet Mesh opens its form, OK with the defaults meshes the part,
and a mapped hex mesh of a holed plate says why it does not fit.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The Open dialog is a native picker the control channel cannot click, so
nothing could walk a person's open path end to end: ui.start file.open
opens the command's JSON form instead. ui.drop {paths} hands the paths
to the next frame with the window system's drops, which open them
through the same route a picked file takes (open_path: by type, in the
background, the unsaved-changes prompt, the recent list). At most 16
paths of at most 4096 bytes each.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The bracket's tet mesh is not bit-identical across platforms (#115): its fillet peak is 213.31 MPa
on macOS and 212.42 on Linux CI, which turned the oracle job red after #110. Those two quantities
are no longer frozen; the page names them mesh-dependent instead of printing one platform's value.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
CI runs on merges to develop (and on fork pull requests); the release workflow builds the draft
from a push to main. AGENTS.md, CONTRIBUTING.md and docs/releasing.md follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The end-to-end demo met a raw-CDT sliver that the validity gate accepted (exactly positive) and
the solver refused. Now:
- One validity criterion, `fieldcraft_model::admissible_jacobian` (normalized Jacobian above
1e-12), used by the implicit solver (fem `positive_inverse`), the explicit tet4/hex8
kinematics and the mesh gate, which proves it on the whole element (tet4: the solvers' own
Jacobian; curved kinds: a Bernstein floor), so whatever passes the gate passes the solvers.
- CDT rounding repaired by flips on the rounded mesh (Diazzi et al. 2023 §5.1) instead of the
±2-ulp nudge.
- `fieldcraft-mesh::tet`: a mutable tetrahedral complex whose every change is a checked
replacement (positive and admissible tetrahedra, faces matched with opposite orientation) with
an exact undo log; edge removal (Klincsek), multi-face removal, Delaunay insertion with
boundary faces, edge collapse; a curvature- and thickness-graded size field; constrained
Delaunay refinement with encroachment splits; ODT smoothing; the Klingner–Shewchuk schedule;
boundary vertices moved onto the exact B-rep surfaces at the end; tet10 with mid-edge nodes on
the geometry.
- `mesh.tet.generate` gains size, order, quality, quality_target, curvature_angle, grading,
max_passes, max_points and reports the CDT's and the mesh's quality; `solve.probe` takes a set
and reports its largest von Mises stress.
- Oracle cases filleted-bracket-fillet-stress(-coarse): the fillet's peak von Mises stress on
tet10 meshes of 2k and 13.5k elements, 213.3 MPa (a four-level study stays within 1.8%); the
CDT cases keep the raw tetrahedralization.
- Corpus quality columns: all 20 valid parts mesh and pass the gate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
ui.select now also drives the viewport's selection: the filter, box
mode, items by name and label as model.set.create takes them, a pick at
a window point or the visible items in a box, changed by a mode
(replace, add, remove, toggle). ui.selection reads it back with its set
members and the hover; ui.dialog takes use_selection (the form's Target
row). Selection stays in the window: no engine command. Documented in
docs/control-protocol.md, with a test that picks the cantilever's free
end by a simulated click and a box, makes sets of it and resolves them,
and hostile-input tests (bad points and boxes, labels, huge lists).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A push to the release branch (or workflow_dispatch) builds the macOS universal dmg and CLI zip,
the Linux tar.gz and AppImage and the Windows zip, with the version from Cargo.toml. The last
job checks the set, writes SHA256SUMS.txt and notes saying how the macOS app was signed, and
creates or updates a draft release; it never publishes. Off the release branch it only uploads
the files as a run artifact (dry run). macOS signing and notarization use the APPLE_* secrets
when they exist and fall back to ad-hoc signing (#72).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The corpus runs mesh.hex.octree's mesher on every part at 1/25 of its diagonal (the size of
the structured hex column) and reports hexahedra, the smallest and mean scaled Jacobian, the
mesh volume against SolidCraft's and the time; a part it cannot mesh gets the reason. The
column caps the elements at 500 000 so a part whose grid explodes is refused in seconds.
Loaded parts carry their bounding-box diagonal for the stages. docs/meshing/corpus.md
regenerated: 15 of 21 parts mesh, including filleted-bracket, rounded-box, sphere-on-plate
and the analytic sphere.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A slow theory case: the corpus bracket meshed by mesh.hex.octree at 7, 5 and 4 mm, clamped
at the base and loaded by 2 kN. Checks equilibrium, that every element is certified valid,
the mesh volume against the CAD volume, the beam bending stress of the upright leg
(sigma = M c / I = 145.3 MPa, within 5%) and the convergence of the fillet von Mises stress
against the 4 mm mesh.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Replaces the mesh with the octree all-hex mesh of a body, an imported surface or every body
of the open design, and tags boundary element faces with their B-rep faces so sets by
geometry resolve. Size, tolerance, refinement depth, element cap, attempts and optimiser
sweeps are validated and capped; the element cap defaults to the session limit
(`Limits::max_hex_elements`), which the hostile-params test keeps small. Body input and face
tagging are shared with mesh.hex.generate. The catalogue's Automatic Hex entry is ready.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
`fieldcraft_mesh::octree::octree_hex_mesh` meshes any closed part with hex8 only:
- an adaptive 3-refinement grid (27-tree) with strong balance and closure, filled with
conforming node-marking transition templates (Schneiders; checked over all 48 symmetries);
- a core of grid cells kept clear of the boundary (the HybridOctree buffer rule), with
non-manifold cleanup and a genus check against the part;
- a feature graph from the B-rep (corners, curves, patches) and a partition-first map of the
core's boundary onto it, then two boundary layers: a padding layer and a pillow per patch,
so every face boundary and sharp edge is captured by element edges;
- a Garanzha-type untangling and fitting energy (shape term |J|^3/chi, a volume term and a
soft fitting term, deterministic across platforms), a compass search on the worst
elements and a certified repair; failures refine the grid near them and rebuild, within
bounded attempts and growth.
The output passes the certified Jacobian check of every element and a gate that the
boundary encloses the elements' volume; boundary quads carry their B-rep faces. Quality is
reported with the same scaled Jacobian as mesh.quality. Literature notes for each step are in
docs/meshing/literature.md (B1.6-B1.10).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
